Trunk stiffness and dynamics during active extension exertions.

Spinal stability is related to the recruitment and control of active muscle stiffness. Stochastic system identification techniques were used to calculate the effective stiffness and dynamics of the trunk during active trunk extension exertions. Twenty-one healthy adult subjects (10 males, 11 females) wore a harness with a cable attached to a servomotor such that isotonic flexion preloads of 100, 135, and 170 N were applied at the T10 level of the trunk. A pseudorandom stochastic force sequence (bandwidth 0-10 Hz, amplitude +/-30 N) was superimposed on the preload causing small amplitude trunk movements. Nonparametric impulse response functions of trunk dynamics were computed and revealed that the system exhibited underdamped second-order behavior. Second-order trunk dynamics were determined by calculating the best least-squares fit to the IRF. The quality of the model was quantified by comparing estimated and observed displacement variance accounted for (VAF), and quality of the second-order fits was calculated as a percentage and referred to as fit accuracy. Mean VAF and fit accuracy were 87.8 +/- 4.0% and 96.0 +/- 4.3%, respectively, indicating that the model accurately represented active trunk kinematic response. The accuracy of the kinematic representation was not influenced by preload or gender. Mean effective stiffness was 2.78 +/- 0.96 N/mm and increased significantly with preload (p < 0.001), but did not vary with gender (p = 0.425). Mean effective damping was 314 +/- 72 Ns/m and effective trunk mass was 37.0 +/- 9.3 kg. We conclude that stochastic system identification techniques should be used to calculate effective trunk stiffness and dynamics.