Literature DB >> 16021367

Totally extraperitoneal inguinal hernioplasty with titanium-coated lightweight polypropylene mesh: early results.

C Tamme1, N Garde, A Klingler, C Hampe, R Wunder, F Köckerling.   

Abstract

BACKGROUND: This prospective study of a new titanium-coated low-weight polypropylene (PP) mesh (16 g PP/m2) was designed to investigate the clinical efficacy and safety of totally extraperitoneal endoscopic hernioplasty (TEP).
METHODS: In this study, 400 patients (average age, 53.5 years; range, 19-80 years) with a total of 588 inguinal hernias underwent surgery with the TEP technique between September 2002 and October 2003. Of these patients, 12.4% had experienced recurrent hernias after open suture herniotomy. In 92% of the cases (368 patients with 540 hernias), a lightweight (16 g PP/m2) titanium-coated polypropylene mesh was implanted without fixation, and in 8% (32 patients with 48 hernias) an identical medium-weight (35 g PP/m2) mesh was implanted. The first follow-up examination was scheduled for postoperative week 6.
RESULTS: In the lightweight mesh group, the mean group, operating time per patient was 61 min, corresponding to a calculated time per hernia of 41 min. Two intraoperative major complications occurred: an injury to the cecum and an injury to the bladder. In 12 cases (2%), bleeding from epigastric, testicular, or pubic bone vessels was observed. No injuries to pelvic vessels were seen. One patient was underwent an endoscopic revision to deal with an anticoagulation-related bleed. The mortality rate was 0%. In 12 patients, postoperative hematomas developed. One preperitoneal lipoma had to be extirpated. No infections of the mesh occurred. The median follow-up period for 371 patients (92.3%) was 7.2 weeks (range, 4-14 weeks). These 343 patients (with 504 hernias) had been provided with a lightweight titanium-coated polypropylene mesh (16 g PP/m2) (follow-up rate, 93.2%). Of these patients, 3.5% reported persistent ingunial pain, 1.7% described a sensation of rigidity in the region of the groin, and 3.2% reported dysesthesia. The early recurrence rate was 0.2%.
CONCLUSIONS: The TEP procedure can be performed safely and effectively with the appreciably material-reduced and titanium-coated polypropylene mesh without the need for fixation of the implant. The low early recurrence rate of 0.2% is evidence that the posterior wall of the inguinal canal is adequately augmented. The question whether the material reduction and the titanium coating of the mesh may bring about a reduction in postoperative chronic pain and the sensation of rigidity in the inguinal area via an improvement in biocompatibility must await the results of the scheduled follow-up examination 1 year after the surgical procedure.

Entities:  

Mesh:

Substances:

Year:  2005        PMID: 16021367     DOI: 10.1007/s00464-004-8219-0

Source DB:  PubMed          Journal:  Surg Endosc        ISSN: 0930-2794            Impact factor:   4.584


  27 in total

1.  [Minimized polypropylene mesh for preperitoneal net plasty (PNP) of incisional hernias].

Authors:  V Schumpelick; B Klosterhalfen; M Müller; U Klinge
Journal:  Chirurg       Date:  1999-04       Impact factor: 0.955

2.  Tension-free inguinal hernia repair: TEP versus mesh-plug versus Lichtenstein: a prospective randomized controlled trial.

Authors:  Sven Bringman; Stig Ramel; Timo-Jaakko Heikkinen; Tord Englund; Bo Westman; Bo Anderberg
Journal:  Ann Surg       Date:  2003-01       Impact factor: 12.969

3.  [Intravesical migration of a polypropylene mesh implant 3 years after laparoscopic transperitoneal hernioplasty].

Authors:  M Bodenbach; T Bschleipfer; M Stoschek; R Beckert; C Sparwasser
Journal:  Urologe A       Date:  2002-07       Impact factor: 0.639

4.  Prospective study of chronic pain after groin hernia repair.

Authors:  T Callesen; K Bech; H Kehlet
Journal:  Br J Surg       Date:  1999-12       Impact factor: 6.939

5.  Mesh migration following laparoscopic inguinal hernia repair.

Authors:  R H Hume; J Bour
Journal:  J Laparoendosc Surg       Date:  1996-10

6.  [Experience with the transabdominal preperitoneal (TAPP) technique regarding recurrent hernia].

Authors:  T Hernandez-Richter; G Meyer; H M Schardey; H G Rau; F W Schildberg
Journal:  Chirurg       Date:  1999-09       Impact factor: 0.955

7.  Ileocutaneous fistula formation following laparoscopic polypropylene mesh hernia repair.

Authors:  K Miller; W Junger
Journal:  Surg Endosc       Date:  1997-07       Impact factor: 4.584

8.  Cooperative hernia study. Pain in the postrepair patient.

Authors:  J Cunningham; W J Temple; P Mitchell; J A Nixon; R M Preshaw; N A Hagen
Journal:  Ann Surg       Date:  1996-11       Impact factor: 12.969

9.  Chronic pain after laparoscopic and open mesh repair of groin hernia.

Authors:  S Kumar; R G Wilson; S J Nixon; I M C Macintyre
Journal:  Br J Surg       Date:  2002-11       Impact factor: 6.939

10.  In vivo studies comparing the biocompatibility of various polypropylene meshes and their handling properties during endoscopic total extraperitoneal (TEP) patchplasty: an experimental study in pigs.

Authors:  H Scheidbach; C Tamme; A Tannapfel; H Lippert; F Köckerling
Journal:  Surg Endosc       Date:  2003-12-29       Impact factor: 4.584

View more
  17 in total

1.  Impact of endoscopic and histological evaluations of two different types of mesh plug for a groin hernia model.

Authors:  Yasuhiro Mandai; Minoru Naito; Tatsuro Hayashi; Hiroaki Asano; Hideo Ino; Kazunori Tsukuda; Shinichiro Miyoshi
Journal:  Surg Today       Date:  2011-10-04       Impact factor: 2.549

2.  Randomized clinical trial of laparoscopic hernia repair comparing titanium-coated lightweight mesh and medium-weight composite mesh.

Authors:  Alfredo Moreno-Egea; Andrés Carrillo-Alcaraz; Víctor Soria-Aledo
Journal:  Surg Endosc       Date:  2012-07-07       Impact factor: 4.584

3.  A lightweight, partially absorbable mesh (Ultrapro) for endoscopic hernia repair: experimental biocompatibility results obtained with a porcine model.

Authors:  C Schug-Pass; C Tamme; F Sommerer; A Tannapfel; H Lippert; F Köckerling
Journal:  Surg Endosc       Date:  2007-10-26       Impact factor: 4.584

Review 4.  Classification of prosthetics used in hernia repair based on weight and biomaterial.

Authors:  A Coda; R Lamberti; S Martorana
Journal:  Hernia       Date:  2011-08-12       Impact factor: 4.739

5.  Shrinkage evaluation of heavyweight and lightweight polypropylene meshes in inguinal hernia repair: a randomized controlled trial.

Authors:  A C Silvestre; G B de Mathia; D J Fagundes; L R Medeiros; M I Rosa
Journal:  Hernia       Date:  2011-07-12       Impact factor: 4.739

6.  Comparison of a lightweight polypropylene mesh (Optilene® LP) and a large-pore knitted PTFE mesh (GORE® INFINIT® mesh)--Biocompatibility in a standardized endoscopic extraperitoneal hernia model.

Authors:  Dietmar A Jacob; Christine Schug-Pass; Florian Sommerer; Andrea Tannapfel; Hans Lippert; Ferdinand Köckerling
Journal:  Langenbecks Arch Surg       Date:  2011-10-12       Impact factor: 3.445

7.  [(section sign) 115 b SGB V threatens outpatient treatment for inguinal hernia. Analysis of outcome and economics].

Authors:  D Weyhe; C Winnemöller; A Hellwig; K Meurer; H Plugge; K Kasoly; H Laubenthal; K-H Bauer; W Uhl
Journal:  Chirurg       Date:  2006-09       Impact factor: 0.955

8.  Mesh fixation with fibrin glue (Tissucol/Tisseel) in hernia repair dependent on the mesh structure--is there an optimum fibrin-mesh combination?--investigations on a biomechanical model.

Authors:  Christine Schug-Pass; Hans Lippert; Ferdinand Köckerling
Journal:  Langenbecks Arch Surg       Date:  2009-01-31       Impact factor: 3.445

9.  Causes of recurrence in laparoscopic inguinal hernia repair.

Authors:  Jan F Kukleta
Journal:  J Minim Access Surg       Date:  2006-09       Impact factor: 1.407

10.  Biomechanical properties of lightweight versus heavyweight meshes for laparoscopic inguinal hernia repair and their impact on recurrence rates.

Authors:  Christian Hollinsky; Simone Sandberg; Thomas Koch; Sabine Seidler
Journal:  Surg Endosc       Date:  2008-04-29       Impact factor: 4.584

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.