| Literature DB >> 1501192 |
F Kawano1, E R Dootz, A Koran, R G Craig.
Abstract
The bond strength of six commercial soft denture liners was evaluated using a modified tensile test. The soft denture liners investigated were Prolastic, VinaSoft, Flexor, Molloplast-B, Novus, and Super-Soft. The samples were processed according to the manufacturers' instructions to cured denture base resin (polymethyl methacrylate; PMMA). The soft denture liners were 10 x 10 x 3 mm and were processed between two PMMA blocks. The samples were placed in tension until failure. The mode of failure, cohesive or adhesive, was also recorded. The results of this study showed that the bond strength is related to the components of the materials. Prolastic, VinaSoft, and Flexor had the lowest bond strength to cured PMMA and ranged from 9.6 to 11.3 kg/cm2. Super-Soft, Novus, and Molloplast-B demonstrated better bond strengths and ranged from 16.7 to 17.6 kg/cm2. The bond strength of Novus could be improved by using the recommended bonding agent and bonded Novus at 26.1 kg/cm2 had the highest bond strength of all materials tested.Entities:
Mesh：
Substances：
Year: 1992 PMID： 1501192 DOI： 10.1016/0022-3913(92)90347-d
Source DB: PubMed Journal: J Prosthet Dent ISSN： 0022-3913 Impact factor: 3.426