Literature DB >> 11759044

Production of poly-3-hydroxybutyrate by Bacillus sp. JMa5 cultivated in molasses media.

Q Wu1, H Huang, G Hu, J Chen, K P Ho, G Q Chen.   

Abstract

A strain of Bacillus sp. coded JMa5 was isolated from molasses contaminated soil. The strain was able to grow at a temperature as high as 45 degrees C and in 250 g/l molasses although the optimal growth temperature was 35-37 degrees C. Cell density reached 30 g/l 8 h after inoculation in a batch culture with an initial concentration of 210 g/l molasses. Under fed-batch conditions, the cells grew to a dry weight of 70 g/l after 30 h of fermentation. The strain accumulated 25-35%, (w/w) polyhydroxybutyrate (PHB) during fermentation. PHB accumulation was a growth-associated process. Factors that normally promote PHB production include high ratios of carbon to nitrogen, and carbon to phosphorus in growth media. Low dissolved oxygen supply resulted in sporulation, which reduced PHB contents and dry weights of the cells. It seems that sporulation induced by reduced supply of nutrients is the reason that PHB content is generally low in the Bacillus strain.

Entities:  

Mesh:

Substances:

Year:  2001        PMID: 11759044     DOI: 10.1023/a:1012222625201

Source DB:  PubMed          Journal:  Antonie Van Leeuwenhoek        ISSN: 0003-6072            Impact factor:   2.271


  10 in total

1.  Microplastics a Novel Substratum for Polyhydroxyalkanoate (PHA)-Producing Bacteria in Aquatic Environments.

Authors:  Harshada T Kankonkar; Rakhee S Khandeparker
Journal:  Curr Microbiol       Date:  2022-07-19       Impact factor: 2.343

2.  Biosynthesis and characterization of polyhydroxyalkanoates in the polysaccharide-degrading marine bacterium Saccharophagus degradans ATCC 43961.

Authors:  Yolanda González-García; Jesús Nungaray; Jesús Córdova; Orfil González-Reynoso; Martin Koller; Aid Atlic; Gerhart Braunegg
Journal:  J Ind Microbiol Biotechnol       Date:  2008-01-09       Impact factor: 3.346

3.  clpC operon regulates cell architecture and sporulation in Bacillus anthracis.

Authors:  Lalit K Singh; Neha Dhasmana; Andaleeb Sajid; Prasun Kumar; Asani Bhaduri; Mitasha Bharadwaj; Sheetal Gandotra; Vipin C Kalia; Taposh K Das; Ajay K Goel; Andrei P Pomerantsev; Richa Misra; Ulf Gerth; Stephen H Leppla; Yogendra Singh
Journal:  Environ Microbiol       Date:  2014-07-17       Impact factor: 5.491

4.  Poly β-hydroxybutyrate production by Bacillus subtilis NG220 using sugar industry waste water.

Authors:  Gulab Singh; Anish Kumari; Arpana Mittal; Anita Yadav; Neeraj K Aggarwal
Journal:  Biomed Res Int       Date:  2013-08-21       Impact factor: 3.411

5.  Optimization of Ralstonia solanacearum cell growth using a central composite rotational design for the P(3HB) production: Effect of agitation and aeration.

Authors:  Mariane Igansi Alves; Karine Laste Macagnan; Camila Rios Piecha; Matheus Marques Torres; Izadora Almeida Perez; Sônia Maria Kesserlingh; Rosane da Silva Rodrigues; Patrícia Diaz de Oliveira; Angelita da Silveira Moreira
Journal:  PLoS One       Date:  2019-01-29       Impact factor: 3.240

6.  Absence of KpsM (Slr0977) Impairs the Secretion of Extracellular Polymeric Substances (EPS) and Impacts Carbon Fluxes in Synechocystis sp. PCC 6803.

Authors:  Marina Santos; Sara B Pereira; Carlos Flores; Catarina Príncipe; Narciso Couto; Esther Karunakaran; Sara M Cravo; Paulo Oliveira; Paula Tamagnini
Journal:  mSphere       Date:  2021-01-27       Impact factor: 4.389

7.  Bacillus subtilis as potential producer for polyhydroxyalkanoates.

Authors:  Mamtesh Singh; Sanjay Ks Patel; Vipin C Kalia
Journal:  Microb Cell Fact       Date:  2009-07-20       Impact factor: 5.328

8.  Response surface method for polyhydroxybutyrate (PHB) bioplastic accumulation in Bacillus drentensis BP17 using pineapple peel.

Authors:  Watsana Penkhrue; Dieter Jendrossek; Chartchai Khanongnuch; Wasu Pathom-Aree; Tomoyasu Aizawa; Rachel L Behrens; S Lumyong
Journal:  PLoS One       Date:  2020-03-19       Impact factor: 3.240

9.  Comparative Characterization and Identification of Poly-3-hydroxybutyrate Producing Bacteria with Subsequent Optimization of Polymer Yield.

Authors:  Aidana Rysbek; Yerlan Ramankulov; Askar Kurmanbayev; Agnieszka Richert; Sailau Abeldenov
Journal:  Polymers (Basel)       Date:  2022-01-15       Impact factor: 4.329

Review 10.  Insightful Advancement and Opportunities for Microbial Bioplastic Production.

Authors:  Kanchan Samadhiya; Rimjhim Sangtani; Regina Nogueira; Kiran Bala
Journal:  Front Microbiol       Date:  2022-01-04       Impact factor: 5.640

  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.