Sensitivity to horizontal and vertical corrugations defined by binocular disparity.

Sensitivity to corrugations defined by binocular disparity differs as a function of the modulation frequency. Such functions have proved to be useful descriptive and analytical tools in the study of the mechanisms involved in disparity processing. Indeed, given certain assumptions, these sensitivity functions can be used to predict certain perceptual outcomes. Given their importance, it is surprising that there is no comprehensive data set of disparity sensitivity functions (DSF) for a range of observers over a broad range of spatial frequencies and orientations. Here we report DSFs for six observers over an eight octave range of sinusoidal corrugations in disparity (0.0125-3.2 cpd). Multi-cycle, low frequency surfaces were used to assess the degree to which the fall-off in sensitivity at low corrugation frequencies is attributable to the decreasing number of cycles displayed. The data was found to form a continuous function despite the different number of cycles displayed. We conclude that the fall off in sensitivity is due to the spatial interactions in disparity processing. We also determined DSFs for the same observers to both vertically and horizontally oriented sinusoidal disparity corrugations in order to characterise the extent of the stereoscopic anisotropy. In general, the best thresholds for detecting vertically oriented disparity corrugations were higher (approximately 4 arc sec) than for horizontally oriented corrugations (approximately 2 arc sec). Moreover, the functions were shifted toward the high spatial frequency end of the spectrum.