Literature DB >> 9973051

Isolation and characterization of polyethylene wear debris associated with osteolysis following total shoulder arthroplasty.

M A Wirth1, C M Agrawal, J D Mabrey, D D Dean, C R Blanchard, M A Miller, C A Rockwood.   

Abstract

We evaluated the interface membranes surrounding three total shoulder prostheses that had been removed because of progressive aseptic loosening associated with osteolysis. The mean time between the uncomplicated initial arthroplasty and the revision procedure was twelve years (10.5, 10.5, and 16.0 years). Membranes from around both the humeral and the glenoid component were obtained from all three shoulders and were studied histologically to determine the biological response involved in the development of aseptic loosening. For the purpose of comparison, periprosthetic tissue was also obtained from the sites of four failed total hip prostheses that were associated with osteolysis. Polyethylene particles were retrieved with an enzymatic digestion technique that involved the use of papain. Raman vibrational spectroscopy verified that the particles were ultra-high molecular weight polyethylene. The particles were isolated from the tissue, and a computerized image-analysis system characterized 582 of them in terms of size and morphology. Each particle was defined with the use of six shape descriptors: equivalent circle diameter, roundness, form factor, aspect ratio, elongation, and outline fractal dimension. The particles from the hips had a mean equivalent circle diameter (and standard error of the mean) of 0.62 +/- 0.03 micrometer, were predominantly globular in shape, and had low mean values for aspect ratio (1.46 +/- 0.02) and elongation (1.85 +/- 0.03) and relatively high values for roundness (0.74 +/- 0.01) and form factor (0.87 +/- 0.01). In contrast, the particles from the shoulders had a mean equivalent circle diameter of 1.04 +/- 0.03 micrometers. In addition, they had relatively high values for aspect ratio (2.36 +/- 0.07) and elongation (4.96 +/- 0.23) and correspondingly low values for roundness (0.54 +/- 0.01) and form factor (0.67 +/- 0.01), indicating that they were more fibrillar in shape. The particles from the shoulders and those from the hips were significantly different (p < 0.0001) with respect to all of the descriptors except outline fractal dimension. The particles from the shoulders, in general, were larger and more fibrillar than the particles from the hips.

Entities:  

Mesh:

Substances:

Year:  1999        PMID: 9973051     DOI: 10.2106/00004623-199901000-00005

Source DB:  PubMed          Journal:  J Bone Joint Surg Am        ISSN: 0021-9355            Impact factor:   5.284


  11 in total

1.  Jay Donald Mabrey, MD: a conversation with the editor. Interview by William Clifford Roberts.

Authors:  Jay Donald Mabrey
Journal:  Proc (Bayl Univ Med Cent)       Date:  2006-01

2.  Evaluation of a reconstruction reverse shoulder for tumour surgery and tribological comparision with an anatomical shoulder arthroplasty.

Authors:  Ralf Dieckmann; Dennis Liem; Georg Gosheger; Marcel-Philipp Henrichs; Steffen Höll; Jendrik Hardes; Arne Streitbürger
Journal:  Int Orthop       Date:  2013-01-15       Impact factor: 3.075

3.  The 2012 John Charnley Award: Clinical multicenter studies of the wear performance of highly crosslinked remelted polyethylene in THA.

Authors:  Charles R Bragdon; Michael Doerner; John Martell; Bryan Jarrett; Henrik Palm; Henrik Malchau
Journal:  Clin Orthop Relat Res       Date:  2013-02       Impact factor: 4.176

4.  Comparison of periprosthetic tissue digestion methods for ultra-high molecular weight polyethylene wear debris extraction.

Authors:  Ryan M Baxter; Marla J Steinbeck; Joanne L Tipper; Javad Parvizi; Michele Marcolongo; Steve M Kurtz
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2009-10       Impact factor: 3.368

Review 5.  Detritic synovitis can mimic a Propionibacterium periprosthetic infection.

Authors:  Jacob D Gorbaty; Robert M Lucas; Frederick A Matsen
Journal:  Int Orthop       Date:  2015-11-10       Impact factor: 3.075

6.  Metal wear particles: What we know, what we do not know, and why.

Authors:  Fabrizio Billi; Paul Benya; Edward Ebramzadeh; Pat Campbell; Frank Chan; Harry A McKellop
Journal:  SAS J       Date:  2009-12-01

7.  Failure mechanism of the all-polyethylene glenoid implant.

Authors:  Junaid Sarah; Gupta Sanjay; Sanghavi Sanjay; Anglin Carolyn; Roger Emery; Amis Andrew; Hansen Ulrich
Journal:  J Biomech       Date:  2009-11-25       Impact factor: 2.712

8.  Wear particles and ions from cemented and uncemented titanium-based hip prostheses-a histological and chemical analysis of retrieval material.

Authors:  Susann Grosse; Hans Kristian Haugland; Peer Lilleng; Peter Ellison; Geir Hallan; Paul Johan Høl
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2014-07-23       Impact factor: 3.368

9.  A CT scan protocol for the detection of radiographic loosening of the glenoid component after total shoulder arthroplasty.

Authors:  Thomas Gregory; Ulrich Hansen; Monica Khanna; Celine Mutchler; Saik Urien; Andrew A Amis; Bernard Augereau; Roger Emery
Journal:  Acta Orthop       Date:  2013-11-29       Impact factor: 3.717

Review 10.  Shoulder Arthroplasty Imaging: What's New.

Authors:  T M Gregory; J Gregory; E Nicolas; J Pierrart; E Masmejean
Journal:  Open Orthop J       Date:  2017-09-30
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.