Literature DB >> 9709648

IPS Empress crown system: three-year clinical trial results.

J A Sorensen1, C Choi, M I Fanuscu, W T Mito.   

Abstract

The IPS Empress system is a highly esthetic hot pressed glass ceramic material for fabrication of single crowns. Adhesive cementation of the system not only contributes to the esthetics but is necessary for increased strength of the crown. The purpose of this prospective clinical trials was to evaluate the longevity of 75 adhesively cemented Empress full crowns. An additional aim was to assess the adhesive cementation methodology and potential side effects. At the three-year point, one molar crown fractured for a 1.3 percent failure rate. The resin cementation technique that was employed exhibited a low incidence of microleakage with few clinical side effects. There was a 5.6 percent incidence of post-cementation sensitivity, with all symptoms subsiding by eight weeks. None of the crowns in the study required endodontic therapy.

Entities:  

Mesh:

Substances:

Year:  1998        PMID: 9709648

Source DB:  PubMed          Journal:  J Calif Dent Assoc        ISSN: 1043-2256


  12 in total

1.  Parameters affecting retentive force of electroformed double-crown systems.

Authors:  Florian Beuer; Daniel Edelhoff; Wolfgang Gernet; Michael Naumann
Journal:  Clin Oral Investig       Date:  2009-04-03       Impact factor: 3.573

2.  Precision of fit: zirconia three-unit fixed dental prostheses.

Authors:  Florian Beuer; Michael Naumann; Wolfgang Gernet; John A Sorensen
Journal:  Clin Oral Investig       Date:  2008-09-04       Impact factor: 3.573

3.  Clinical performance of screw-retained and cemented implant-supported zirconia single crowns: 36-month results.

Authors:  Claudio Cacaci; Friederike Cantner; Thomas Mücke; Peter Randelzhofer; Jan Hajtó; Florian Beuer
Journal:  Clin Oral Investig       Date:  2016-10-29       Impact factor: 3.573

4.  Randomized clinical trial of implant-supported ceramic-ceramic and metal-ceramic fixed dental prostheses: preliminary results.

Authors:  Josephine F Esquivel-Upshaw; Arthur E Clark; Jonathan J Shuster; Kenneth J Anusavice
Journal:  J Prosthodont       Date:  2013-06-12       Impact factor: 2.752

5.  Dental ceramics: An update.

Authors:  Arvind Shenoy; Nina Shenoy
Journal:  J Conserv Dent       Date:  2010-10

6.  Computer-assisted design/computer-assisted manufacturing systems: A revolution in restorative dentistry.

Authors:  Arbaz Sajjad
Journal:  J Indian Prosthodont Soc       Date:  2016 Jan-Mar

7.  In vitro study of the fracture resistance of monolithic lithium disilicate, monolithic zirconia, and lithium disilicate pressed on zirconia for three-unit fixed dental prostheses.

Authors:  Jae-Won Choi; So-Yeun Kim; Ji-Hyeon Bae; Eun-Bin Bae; Jung-Bo Huh
Journal:  J Adv Prosthodont       Date:  2017-08-16       Impact factor: 1.904

8.  Wear Characteristics of Dental Ceramic CAD/CAM Materials Opposing Various Dental Composite Resins.

Authors:  Bora Gwon; Eun-Bin Bae; Jin-Ju Lee; Won-Tak Cho; Hyun-Young Bae; Jae-Won Choi; Jung-Bo Huh
Journal:  Materials (Basel)       Date:  2019-06-06       Impact factor: 3.623

Review 9.  A systematic review of outcome measurements and quality of studies evaluating fixed tooth-supported restorations.

Authors:  Devangkumar Rajnikant Patel; Tim O'Brien; Aviva Petrie; Haralampos Petridis
Journal:  J Prosthodont       Date:  2014-06-19       Impact factor: 2.752

10.  Surface roughness of zirconia for full-contour crowns after clinically simulated grinding and polishing.

Authors:  Rim Hmaidouch; Wolf-Dieter Müller; Hans-Christoph Lauer; Paul Weigl
Journal:  Int J Oral Sci       Date:  2014-07-25       Impact factor: 6.344

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.