PURPOSE: To develop a precisely calibrated, perfectly spherical, stainable, soft, and implantable but nonresorbable particulate embolization material. METHODS: Calibrated particles with a trisacryl gelatin polymer core and hydrophilic surface characteristics were obtained by reversed emulsion synthesis followed by application of a wet-sieving technique. Particles were suspended in saline, bottled, and sterilized. Quality control included analysis of particle diameters before and after sieving and of suspension sterility and apyrogenicity. Particles were subsequently tested to ascertain their compatibility with commercially available microcatheters. RESULTS: The resulting embolization material consisted of spherical, stainable microspheres of medical grade with diameters ranging from 130 microns to 1200 microns. Sieving the suspension produced particle groups of homogeneous size (accuracy, +/- 20-100 microns). At injection, the particles showed no tendency to build aggregates or to obstruct the microcatheters. CONCLUSION: Precisely calibrated and easy-to-use microspheres were obtained that satisfied the biomedical requirements for implantation as an embolization material.
PURPOSE: To develop a precisely calibrated, perfectly spherical, stainable, soft, and implantable but nonresorbable particulate embolization material. METHODS: Calibrated particles with a trisacryl gelatin polymer core and hydrophilic surface characteristics were obtained by reversed emulsion synthesis followed by application of a wet-sieving technique. Particles were suspended in saline, bottled, and sterilized. Quality control included analysis of particle diameters before and after sieving and of suspension sterility and apyrogenicity. Particles were subsequently tested to ascertain their compatibility with commercially available microcatheters. RESULTS: The resulting embolization material consisted of spherical, stainable microspheres of medical grade with diameters ranging from 130 microns to 1200 microns. Sieving the suspension produced particle groups of homogeneous size (accuracy, +/- 20-100 microns). At injection, the particles showed no tendency to build aggregates or to obstruct the microcatheters. CONCLUSION: Precisely calibrated and easy-to-use microspheres were obtained that satisfied the biomedical requirements for implantation as an embolization material.
Authors: Andrew L Lewis; Clementine Adams; Wendy Busby; Stephen A Jones; Laura C Wolfenden; Simon W Leppard; Rosemary R Palmer; Sharon Small Journal: J Mater Sci Mater Med Date: 2006-12 Impact factor: 3.896
Authors: Jingjie Hu; Hassan Albadawi; Brian W Chong; Amy R Deipolyi; Rahul A Sheth; Ali Khademhosseini; Rahmi Oklu Journal: Adv Mater Date: 2019-06-06 Impact factor: 30.849
Authors: Leandro de Assis Barbosa; Jose Guilherme Mendes Pereira Caldas; Mario Luiz Conti; Denise Maria Avancini Costa Malheiros; Francisco Ferreira Ramos Journal: Clinics (Sao Paulo) Date: 2009 Impact factor: 2.365