Literature DB >> 843296

[Mechanical properties of bonding between cancellous bone and polymethylmetacrylate. IV. Tensile fatigue strength (author's transl)].

G Bergmann, R Kölbel, A Rohlmann.   

Abstract

In joint replacement the fixation of implants to bone is loaded dynamically. The fatique strength of the bonding of PMMA to cancellous bone was determined for cyclic tensile loading. It was found to be 35% of the static tensile strength and greater than 0.6 Nmm-2 within a 95%-safety-range.

Entities:  

Mesh：

Substances：

Year:  1977        PMID： 843296     DOI： 10.1007/BF00415210

Source DB:  PubMed          Journal:  Arch Orthop Unfallchir        ISSN： 0003-9330


  5 in total

1.  Anchorage of the femoral head prosthesis to the shaft of the femur.

Authors:  J CHARNLEY
Journal:  J Bone Joint Surg Br       Date:  1960-02

2.  [Mechanical properties of bonding between trabecular bone and PMMA. Fatigue strength (author's transl)].

Authors:  R Kölbel
Journal:  Arch Orthop Unfallchir       Date:  1974

3.  [Mechanical properties of bonding between cancellous bone and polymethylmethacrylate. II. Shear strength (author's transl)].

Authors:  R Kölbel; U Boenick; W Krieger; R Wilk
Journal:  Arch Orthop Unfallchir       Date:  1973

4.  [Mechanical properties of bonding between cancellous bone and polymethylmetacrylate. I. Tensile strength].

Authors:  R Kölbel; U Boenick
Journal:  Arch Orthop Unfallchir       Date:  1972

5.  [The reaction of bone to bone-cement in the replacement of the hip joint].

Authors:  H G Willert; P Puls
Journal:  Arch Orthop Unfallchir       Date:  1972
  5 in total
  4 in total

1.  [On fatigue bending strength of PMMA-specimen (author's transl)].

Authors:  M Rojczyk; J Rojczyk-Pflüger
Journal:  Arch Orthop Trauma Surg       Date:  1980

2.  [Mechanical tests with polymethylmethacrylate in fresh specimens and specimens obtained from loosened prosthesis (author's transl)].

Authors:  U Holz; W Hemminger; H Gasse
Journal:  Arch Orthop Trauma Surg       Date:  1978-04-18

3.  Mechanical properties of a cemented porous implant interface.

Authors:  Nicholas A Beckmann; Rudi G Bitsch; Joern B Seeger; Matthias Cm Klotz; Jan Philippe Kretzer; Sebastian Jaeger
Journal:  Acta Orthop       Date:  2014-05-05       Impact factor: 3.717

4.  Cementing technique for total knee arthroplasty in cadavers using a pastry bone cement.

Authors:  Hans Bösebeck; Anna-Maria Holl; Peter Ochsner; Manuel Groth; Kevin Stippich; Andrej M Nowakowski; Christian Egloff; Sebastian Hoechel; Beat Göpfert; Sebastian Vogt
Journal:  J Orthop Surg Res       Date:  2021-07-01       Impact factor: 2.359
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.