Literature DB >> 7447658

[On fatigue bending strength of PMMA-specimen (author's transl)].

M Rojczyk, J Rojczyk-Pflüger.   

Abstract

The fatigue response of PMMA-specimen was tested under cyclic bending of 1.5 Hz in a particularly designed testing device. Specimen were tested that a "Wöhler" curve and the corresponding fatigue strength could be evaluated. The fatigue strength was reached after a comparatively short time and ranged in the order of 33 per cent of static breaking strength.

Entities:  

Mesh：

Substances：

Year:  1980        PMID： 7447658     DOI： 10.1007/bf00381526

Source DB:  PubMed          Journal:  Arch Orthop Trauma Surg        ISSN： 0344-8444


  6 in total

1.  [On the stress state of bone cement fixing a hip joint prosthesis (author's transl)].

Authors:  J Stern
Journal:  Arch Orthop Unfallchir       Date:  1977-06-30

2.  [Mechanical properties of bonding between trabecular bone and PMMA. Fatigue strength (author's transl)].

Authors:  R Kölbel
Journal:  Arch Orthop Unfallchir       Date:  1974

3.  [Standardization of implant materials shown by "bone cement". Comparative investigations in consideration of antibiotic admixtures (author's transl)].

Authors:  M Ungethüm; J Hinterberger
Journal:  Z Orthop Ihre Grenzgeb       Date:  1978

4.  Some clinically relevant variables affecting the mechanical behaviour of bone cement.

Authors:  A J Lee; R S Ling; S S Vangala
Journal:  Arch Orthop Trauma Surg       Date:  1978-08-11

5.  [Mechanical tests with polymethylmethacrylate in fresh specimens and specimens obtained from loosened prosthesis (author's transl)].

Authors:  U Holz; W Hemminger; H Gasse
Journal:  Arch Orthop Trauma Surg       Date:  1978-04-18

6.  [Mechanical properties of bonding between cancellous bone and polymethylmetacrylate. IV. Tensile fatigue strength (author's transl)].

Authors:  G Bergmann; R Kölbel; A Rohlmann
Journal:  Arch Orthop Unfallchir       Date:  1977-02-28
  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.