Literature DB >> 8237304

The fit of gold inlays and three ceramic inlay systems. A clinical and in vitro study.

M Molin1, S Karlsson.   

Abstract

Four inlay systems--gold, Cerec, Mirage, and Empress inlays--were evaluated for their adaptation to stone die and clinically to the tooth by means of a replica technique. Twenty inlays of each system were placed on premolars and molars in the lower jaw. A microscope was used to measure the adaptation at the approximal margin, at the inner axial wall, and at the occlusal cavosurface area. An overall better fit was observed for the gold inlays than for the ceramic inlays. When the different measuring locations were compared, a better fit was found for the occlusal area. The greatest discrepancies were recorded for the Cerec inlays, whereas the Mirage and Empress inlays were comparable.

Mesh:

Substances:

Year:  1993        PMID: 8237304     DOI: 10.3109/00016359309040568

Source DB:  PubMed          Journal:  Acta Odontol Scand        ISSN: 0001-6357            Impact factor:   2.331


  24 in total

1.  Marginal and internal fit of four-unit zirconia fixed dental prostheses based on digital and conventional impression techniques.

Authors:  Júnio S Almeida e Silva; Kurt Erdelt; Daniel Edelhoff; Élito Araújo; Michael Stimmelmayr; Luiz Clovis Cardoso Vieira; Jan-Frederik Güth
Journal:  Clin Oral Investig       Date:  2013-05-29       Impact factor: 3.573

2.  Can lithium disilicate ceramic crowns be fabricated on the basis of CBCT data?

Authors:  Ana Elisa Colle Kauling; Christine Keul; Kurt Erdelt; Jan Kühnisch; Jan-Frederik Güth
Journal:  Clin Oral Investig       Date:  2019-02-06       Impact factor: 3.573

3.  Marginal and internal fit of posterior three-unit fixed zirconia dental prostheses fabricated with two different CAD/CAM systems and materials.

Authors:  Joana Schönberger; Kurt-Jürgen Erdelt; Daniel Bäumer; Florian Beuer
Journal:  Clin Oral Investig       Date:  2017-02-04       Impact factor: 3.573

4.  Dental Wings CAD/CAM system precision: an internal and marginal fit sperimental analisys.

Authors:  G Sannino; F Gloria; R Schiavetti; L Ottria; A Barlattani
Journal:  Oral Implantol (Rome)       Date:  2010-04-20

5.  The clinical accuracy of single crowns exclusively fabricated by digital workflow--the comparison of two systems.

Authors:  Petya K Brawek; Stefan Wolfart; Lutz Endres; Armin Kirsten; Sven Reich
Journal:  Clin Oral Investig       Date:  2013-01-31       Impact factor: 3.573

6.  Fit of 4-unit FDPs from CoCr and zirconia after conventional and digital impressions.

Authors:  Kazuhiko Ueda; Florian Beuer; Michael Stimmelmayr; Kurt Erdelt; Christine Keul; Jan-Frederik Güth
Journal:  Clin Oral Investig       Date:  2015-06-30       Impact factor: 3.573

7.  Measurement of cement thickness under lithium disilicate crowns using an impression material technique.

Authors:  Sven Reich; Sophia Uhlen; Stephan Gozdowski; Ulrich Lohbauer
Journal:  Clin Oral Investig       Date:  2010-05-12       Impact factor: 3.573

8.  Considerations for ceramic inlays in posterior teeth: a review.

Authors:  Christa D Hopp; Martin F Land
Journal:  Clin Cosmet Investig Dent       Date:  2013-04-18

9.  Comparison of Conventional Methods and Laser-Assisted Rapid Prototyping for Manufacturing Fixed Dental Prostheses: An In Vitro Study.

Authors:  Giorgio Pompa; Stefano Di Carlo; Francesca De Angelis; Maria Paola Cristalli; Susanna Annibali
Journal:  Biomed Res Int       Date:  2015-10-21       Impact factor: 3.411

10.  Marginal and internal fit of crowns based on additive or subtractive manufacturing.

Authors:  Yasser Haddadi; Bahram Ranjkesh; Flemming Isidor; Golnosh Bahrami
Journal:  Biomater Investig Dent       Date:  2021-06-26
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.