Literature DB >> 8027094

Mineral apposition rates of human cancellous bone at the interface of porous coated implants.

R D Bloebaum1, K N Bachus, N G Momberger, A A Hofmann.   

Abstract

Human cancellous bone ingrowth studies were conducted on 19 consenting bilateral total knee arthroplasty (TKA) patients. Titanium porous coated cylinders were implanted into the medial femoral condyle of the contralateral knee during the first of two TKAs. Retrieval was performed at the time of the second TKA (6-131 weeks later), and fluorochrome analysis was conducted. Mean mineral apposition rates (MAR) at the interface measured 1.0 micron/day, whereas 4 mm away, the peripheral bone had a mean MAR of 0.8 micron/day. This represented a 25% acceleration in the interface bone remodeling rate when compared with the periphery (P < .05). This study showed the bone advanced appositionally at the interface at a rate of approximately 1 micron/day. Analysis showed that when bone was over 50 microns from the porous coating, bone ingrowth did not occur. These results emphasize the need for surgical precision and careful postoperative management to achieve bone ingrowth.

Entities:  

Mesh:

Substances:

Year:  1994        PMID: 8027094     DOI: 10.1002/jbm.820280503

Source DB:  PubMed          Journal:  J Biomed Mater Res        ISSN: 0021-9304


  8 in total

1.  Does using autograft bone chips achieve consistent bone ingrowth in primary TKA?

Authors:  Roy D Bloebaum; Karyn E Koller; Bettina M Willie; Aaron A Hofmann
Journal:  Clin Orthop Relat Res       Date:  2012-07       Impact factor: 4.176

2.  [Hydroxyapatite ceramics in clinical application. Histological findings in 23 patients].

Authors:  A Liebendörfer; S Tröster
Journal:  Unfallchirurgie       Date:  1997-04

3.  Percutaneous osseointegrated prostheses for amputees: Limb compensation in a 12-month ovine model.

Authors:  Trevor J Shelton; J Peter Beck; Roy D Bloebaum; Kent N Bachus
Journal:  J Biomech       Date:  2011-09-13       Impact factor: 2.712

4.  A Method for Cemented Bone Interface Examination Without Polymethylmethacrylate Embedment.

Authors:  Rov D Bloebaum; H William Higgins; Karyn E Koller
Journal:  J Histotechnol       Date:  2006-12       Impact factor: 0.714

5.  An integrated computational model of the bone microenvironment in bone-metastatic prostate cancer.

Authors:  Arturo Araujo; Leah M Cook; Conor C Lynch; David Basanta
Journal:  Cancer Res       Date:  2014-05-01       Impact factor: 12.701

6.  Scaffolds with a standardized macro-architecture fabricated from several calcium phosphate ceramics using an indirect rapid prototyping technique.

Authors:  C E Wilson; C A van Blitterswijk; A J Verbout; W J A Dhert; J D de Bruijn
Journal:  J Mater Sci Mater Med       Date:  2010-11-11       Impact factor: 3.896

7.  In vivo evaluation of osseointegration ability of sintered bionic trabecular porous titanium alloy as artificial hip prosthesis.

Authors:  Xiaowei Bai; Ji Li; Zhidong Zhao; Qi Wang; Ningyu Lv; Yuxing Wang; Huayi Gao; Zheng Guo; Zhongli Li
Journal:  Front Bioeng Biotechnol       Date:  2022-09-14

8.  Cell Seeding Process Experiment and Simulation on Three-Dimensional Polyhedron and Cross-Link Design Scaffolds.

Authors:  Ziyu Liu; Maryam Tamaddon; Yingying Gu; Jianshu Yu; Nan Xu; Fangli Gang; Xiaodan Sun; Chaozong Liu
Journal:  Front Bioeng Biotechnol       Date:  2020-03-04
  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.