Literature DB >> 7674186

In vivo marginal adaptation of cast crowns luted with different cements.

S N White1, Z Yu, J F Tom, S Sangsurasak.   

Abstract

Large marginal crown discrepancies are deleterious. Although previous studies have examined casting seating in vitro, few have evaluated the effects of different luting cements on in vivo seating. Hence this in vivo study compared marginal discrepancies created by different cements on cast crowns. Tooth preparations were completed according to acceptable procedures on previously intact human molars that were severely periodontally compromised and scheduled for extraction. Castings were made by conventional techniques. The castings were randomly assigned to the following luting agents: zinc phosphate cement, resin-modified glass-ionomer cement, and the same resin-modified glass-ionomer cement with a dentinal bonding agent. After 6 months the teeth were carefully extracted, embedded, and sectioned, and vertical and horizontal discrepancies were measured. Analysis of variance revealed that all cements resulted in similar discrepancies. Vertical discrepancies were considerably greater than horizontal discrepancies, and the distributions of marginal discrepancies were skewed towards upper ranges.

Entities:  

Mesh:

Substances:

Year:  1995        PMID: 7674186     DOI: 10.1016/s0022-3913(05)80224-0

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN: 0022-3913            Impact factor:   3.426


  8 in total

1.  Evaluation of the Marginal Fit of CAD/CAM Crowns Fabricated Using Two Different Chairside CAD/CAM Systems on Preparations of Varying Quality.

Authors:  Walter Renne; Bethany Wolf; Raymond Kessler; Karen McPherson; Anthony S Mennito
Journal:  J Esthet Restor Dent       Date:  2015-07-14       Impact factor: 2.843

2.  Conventional and contemporary luting cements: an overview.

Authors:  Komal Ladha; Mahesh Verma
Journal:  J Indian Prosthodont Soc       Date:  2010-12-12

3.  A comparison of the marginal adaptation of cathode-arc vapor-deposited titanium and cast base metal copings.

Authors:  Jean C Wu; Li-Chung Lai; Cherilyn G Sheets; James Earthman; Robert Newcomb
Journal:  J Prosthet Dent       Date:  2011-06       Impact factor: 3.426

4.  Fit of cobalt-chromium copings fabricated by the selective laser melting technology and casting method: A comparative evaluation using a profilometer.

Authors:  Koosha Gholamrezaei; Fariborz Vafaee; Behzad Fathi Afkari; Farnaz Firouz; Mozhgan Seif
Journal:  Dent Res J (Isfahan)       Date:  2020-05-23

5.  Comparative Evaluation of Marginal and Internal Gap of Co-Cr Copings Fabricated from Conventional Wax Pattern, 3D Printed Resin Pattern and DMLS Tech: An In Vitro Study.

Authors:  Eswaran Bhaskaran; N S Azhagarasan; Saket Miglani; T Ilango; G Phani Krishna; B Gajapathi
Journal:  J Indian Prosthodont Soc       Date:  2013-05-03

Review 6.  Marginal and internal adaptation of lithium disilicate partial restorations: A systematic review and meta-analysis.

Authors:  Natália Almeida Bastos; Sandro Basso Bitencourt; Renan Figueiredo Carneiro; Brunna Mota Ferrairo; Samira Sandy Ferreira Strelhow; Daniela Micheline Dos Santos; Juliana Fraga Soares Bombonatti
Journal:  J Indian Prosthodont Soc       Date:  2020-10-08

7.  Comparative Evaluation of Microleakage of Zinc Phosphate Cement, Resin-Modified Glass Ionomer, and Two Dual-Cure Resin Cements: In Vitro Study.

Authors:  Jose Jacob; A Devadathan; Suja Joseph; Pradeep C Dathan; Suja Mathew; Rene Kuriakose
Journal:  J Pharm Bioallied Sci       Date:  2022-07-13

8.  Correlation between margin fit and microleakage in complete crowns cemented with three luting agents.

Authors:  Paulo Henrique Orlato Rossetti; Accacio Lins do Valle; Ricardo Marins de Carvalho; Mario Fernando De Goes; Luiz Fernando Pegoraro
Journal:  J Appl Oral Sci       Date:  2008 Jan-Feb       Impact factor: 2.698

  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.