Warning: Undefined array key "mm" in /www/wwwroot/www.ai-bt.com/si.php on line 10 Deprecated: trim(): Passing null to parameter #1 ($string) of type string is deprecated in /www/wwwroot/www.ai-bt.com/si.php on line 10 The elastic modulus for bone.

Literature DB >> 4846264

The elastic modulus for bone.

D T Reilly, A H Burstein, V H Frankel.

Abstract

Mesh：

Year: 1974 PMID： 4846264 DOI： 10.1016/0021-9290(74)90018-9

Source DB: PubMed Journal: J Biomech ISSN： 0021-9290 Impact factor: 2.712

Keyword Cloud
Cited

× No keyword cloud information.

42 in total

1. Dynamic bending tolerance and elastic-plastic material properties of the human femur.

Authors: J R Funk; J R Kerrigan; J R Crandall
Journal: Annu Proc Assoc Adv Automot Med Date: 2004

2. Bone remodelling in the pores and around load bearing transchondral isoelastic porous-coated glassy carbon implants: experimental study in rabbits.

Authors: T Tarvainen; I Paronen; T Tunturi; J Rautavuori; P Tormala; H Patiala; P Rokkanen
Journal: J Mater Sci Mater Med Date: 1998-09 Impact factor: 3.896

3. Titanium powder sintering for preparation of a porous functionally graded material destined for orthopaedic implants.

Authors: M Thieme; K P Wieters; F Bergner; D Scharnweber; H Worch; J Ndop; T J Kim; W Grill
Journal: J Mater Sci Mater Med Date: 2001-03 Impact factor: 3.896

4. Fabrication and mechanical properties of PLLA/PCL/HA composites via a biomimetic, dip coating, and hot compression procedure.

Authors: L F Charles; M T Shaw; J R Olson; M Wei
Journal: J Mater Sci Mater Med Date: 2010-03-18 Impact factor: 3.896

5. In situ parameter identification of optimal density-elastic modulus relationships in subject-specific finite element models of the proximal femur.

Authors: Alexander Cong; Jorn Op Den Buijs; Dan Dragomir-Daescu
Journal: Med Eng Phys Date: 2010-10-27 Impact factor: 2.242

6. Effect of mineral content on the nanoindentation properties and nanoscale deformation mechanisms of bovine tibial cortical bone.

Authors: Kuangshin Tai; Hang J Qi; Christine Ortiz
Journal: J Mater Sci Mater Med Date: 2005-10 Impact factor: 3.896

The elastic modulus for bone.

1. Dynamic bending tolerance and elastic-plastic material properties of the human femur.

2. Bone remodelling in the pores and around load bearing transchondral isoelastic porous-coated glassy carbon implants: experimental study in rabbits.

3. Titanium powder sintering for preparation of a porous functionally graded material destined for orthopaedic implants.

4. Fabrication and mechanical properties of PLLA/PCL/HA composites via a biomimetic, dip coating, and hot compression procedure.

5. In situ parameter identification of optimal density-elastic modulus relationships in subject-specific finite element models of the proximal femur.

6. Effect of mineral content on the nanoindentation properties and nanoscale deformation mechanisms of bovine tibial cortical bone.

7. Performance of CF/PA12 composite femoral stems.

8. Tensile testing of bone over a wide range of strain rates: effects of strain rate, microstructure and density.

Review 9. Post-yield and failure properties of cortical bone.

10. A surrogate long-bone model with osteoporotic material properties for biomechanical testing of fracture implants.