Literature DB >> 3908659

Effect of material bulk and undercuts on the accuracy of impression materials.

P A de Araujo, K D Jorgensen.   

Abstract

A truncated cone-shaped chromium steel die was used to determine the influence of the bulk of elastomeric impression material and size of undercut on the dimension of stone dies. It was found that both conditions affect the accuracy of stone dies. The possible clinical implications of the inaccuracies were discussed.

Mesh：

Substances：

Year:  1985        PMID： 3908659     DOI： 10.1016/0022-3913(85)90472-x

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN： 0022-3913            Impact factor:   3.426


  13 in total

1.  An evaluation of dimensional accuracy of one-step and two-step impression technique using addition silicone impression material: an in vitro study.

Authors:  Neelam A Pande; R D Parkhedkar
Journal:  J Indian Prosthodont Soc       Date:  2012-10-10

2.  A Comparison of Dimensional Accuracy of Addition Silicone of Different Consistencies with Two Different Spacer Designs - In-vitro Study.

Authors:  Suprabha Rathee; B Eswaran; Ma Eswaran; R Prabhu; Kr Geetha; Gp Krishna
Journal:  J Clin Diagn Res       Date:  2014-07-20

3.  Accuracy of Single-Step versus 2-Step Double-Mix Impression Technique.

Authors:  Eduardo Batista Franco; Leonardo Fernandes da Cunha; Francyle Simões Herrera; Ana Raquel Benetti
Journal:  ISRN Dent       Date:  2011-07-25

4.  A Comparison of Accuracy of Matrix Impression System with Putty Reline Technique and Multiple Mix Technique: An In Vitro Study.

Authors:  M Praveen Kumar; Suneel G Patil; Bhandari Dheeraj; Keshav Reddy; Dinker Goel; Gopi Krishna
Journal:  J Int Oral Health       Date:  2015-06

Review 5.  The elastomers for complete denture impression: A review of the literature.

Authors:  Elie E Daou
Journal:  Saudi Dent J       Date:  2010-07-17

6.  Effect of water temperature on the fit of provisional crown margins during polymerization: An in vitro study.

Authors:  Vivekanandan Ramkumar; Arunachalam Sangeetha; Vinaya Kumar
Journal:  J Pharm Bioallied Sci       Date:  2012-08

7.  Comparing the Accuracy of Three Different Impression Materials in Making Duplicate Dies.

Authors:  Farshad Bajoghli; Mahmoud Sabouhi; Saeid Nosouhian; Amin Davoudi; Zeynab Behnamnia
Journal:  J Int Oral Health       Date:  2015-07

8.  Effect of conventional and experimental gingival retraction solutions on the tensile strength and inhibition of polymerization of four types of impression materials.

Authors:  Sérgio Sábio; Paulo Afonso Franciscone; José Mondelli
Journal:  J Appl Oral Sci       Date:  2008 Jul-Aug       Impact factor: 2.698

9.  Effect of storage period on the accuracy of elastomeric impressions.

Authors:  Eduardo Batista Franco; Leonardo Fernandes da Cunha; Ana Raquel Benetti
Journal:  J Appl Oral Sci       Date:  2007-06       Impact factor: 2.698

10.  Effect of cervical relining of acrylic resin copings on the accuracy of stone dies obtained using a polyether impression material.

Authors:  André Tomazini Gomes de Sá; César Antunes de Freitas; Fátima Cristina de Sá; Wagner José Silva Ursi; Tânia Christina Simões; Márcia Furtado Antunes de Freitas
Journal:  J Appl Oral Sci       Date:  2008 Jan-Feb       Impact factor: 2.698
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.