Flexible Versus Rigid Reaming Systems for Independent Femoral Tunnel Reaming During ACL Reconstruction: Minimum 2-Year Clinical Outcomes.

Background: Radiographic and cadaveric studies have suggested that anatomic anterior cruciate ligament reconstruction (ACLR) femoral tunnel drilling with the use of a flexible reaming system through an anteromedial portal (AM-FR) may result in a different graft and femoral tunnel position compared with using a rigid reamer through an accessory anteromedial portal with hyperflexion (AAM-RR). No prior studies have directly compared clinical outcomes between the use of these 2 techniques for femoral tunnel creation during ACLR. Purpose: To compare revision rates at a minimum of 2 years postoperatively for patients who underwent ACLR with AM-FR versus AAM-RR. The secondary objectives were to compare functional testing and patient-reported outcomes between the cohorts. Study Design: Cohort study; Level of evidence, 3.
Methods: Included were consecutive patients at a single academic institution between 2013 and 2018 who underwent primary ACLR without additional ligamentous reconstruction. Patients were separated into 2 groups based on the type of anatomic femoral tunnel drilling: AM-FR or AAM-RR. Graft failure, determined by revision ACLR, was assessed with a minimum 2 years of postoperative follow-up. The authors also compared patient-reported outcome scores (International Knee Documentation Committee [IKDC] and Knee injury and Osteoarthritis Outcome Score [KOOS]) and functional performance testing performed at 6 months postoperatively.
Results: A total of 284 (AAM-RR, 232; AM-FR, 52) patients were included. The mean follow-up time was 3.7 ± 1.5 years, with a minimum 2-year follow-up rate of 90%. There was no significant difference in the rate of revision ACLR between the AAM-RR and AM-FR groups (10.8% vs 9.6%, respectively; P = .806). At 6 months postoperatively, there were no significant between-group differences in peak knee extension strength, peak knee flexion strength, limb symmetry indices, or hop testing, as well as no significant differences in IKDC (AAM-RR, 81.1; AM-FR, 78.9; P = .269) or KOOS (AAM-RR, 89.0; AM-FR, 86.7; P = .104).
Conclusion: In this limited study, independent femoral tunnel drilling for ACLR using rigid or flexible reaming systems resulted in comparable rates of revision ACLR at a minimum of 2 years postoperatively, with no significant differences in strength assessments or patient-reported outcomes at 6 months postoperatively.

While numerous controversies remain regarding the optimal surgical technique for or perioperative management of patients undergoing anterior cruciate ligament (ACL) reconstruction (ACLR), the position of the femoral and tibial tunnels is known to be of critical importance to outcome because of their effect on the resultant translational and rotational stability of the knee. In particular, a malpositioned femoral tunnel is cited as being the most common cause of graft failure after surgery. Despite recognition of this importance, it is acknowledged that there remains discrepancy between intended and achieved femoral tunnel position during ACLR.

Numerous studies have demonstrated that anatomic positioning of the femoral tunnel at the footprint of the native ACL more accurately re-creates the native knee kinematics and improves translational and rotational stability by better restoring graft tensioning throughout knee range of motion. Specifically, femoral tunnel positioning that is too vertical in the coronal plane may lead to rotational instability, and positioning that is too anterior or posterior in the sagittal plane may inadequately restore the length-tension relationship of the native ACL. As a result, there has been an increased emphasis placed on achieving anatomic positioning of the femoral tunnel over the last decade. This emphasis on achieving anatomic tunnel placement has caused many surgeons to abandon transtibial (TT) femoral tunnel drilling in favor of less constrained or “independent” techniques for creating the femoral tunnel, as TT drilling has been repeatedly demonstrated to result in more vertical graft positioning and inferior rotational stability by comparison.

Several methods for independent femoral tunnel drilling exist, including the use of a rigid reamer through an accessory anteromedial portal with hyperflexion (AAM-RR) or via an outside-in drilling technique and the use of flexible reaming systems through a standard anteromedial portal (AM-FR). Most existing studies evaluating clinical outcomes after ACLR have grouped AAM-RR and AM-FR together as “independent femoral tunnel drilling,” despite several technical differences in their use. AAM-RR requires hyperflexion of the knee to 120°, which can be challenging in revision ACLR or depending on a patient’s intrinsic flexibility, musculature, and body habitus. Additionally, the placement of the anteromedial portal itself relative to the patient’s femoral notch anatomy can constrain the ability to anatomically re-create the femoral tunnel relative to the ACL footprint when using an inflexible guide and reamer.

More recent radiographic and cadaveric studies have suggested that these technical differences may result in AM-FR producing a more radiographically anatomic ACL graft position; longer, more anteverted femoral tunnels; and a theoretically decreased likelihood of posterior wall breakage or damage to posterolateral knee structures. To date, however, no studies have directly compared clinical outcomes between the use of AAM-RR and AM-FR for femoral tunnel creation.

The primary objective of this study was to compare revision ACLR rates at a minimum of 2 years postoperatively for patients undergoing ACLR between the AAM-RR and AM-FR femoral tunnel drilling techniques. The secondary objectives were to compare functional testing and 6-month postoperative patient-reported outcome scores between the 2 techniques. We hypothesized that there would be no difference in revision ACLR rates between the 2 techniques.

Methods

This retrospective cohort study was approved by the academic center’s institutional review board. A total of 316 consecutive patients who underwent ACLR at a single academic institution between March 2013 and August 2018 were evaluated. All eligible patients underwent surgery performed by 1 of 6 attending orthopaedic surgeons at a single institution, all of whom are fellowship trained in orthopaedic sports medicine. Retrospective chart review was performed to evaluate patients for study inclusion. Operative notes were evaluated to identify the surgical technique and reaming system used for femoral tunnel creation during ACLR. Choice of femoral tunnel drilling was by surgeon preference and did not change during the study period. Two surgeons performed exclusively rigid reaming, and the remaining 4 surgeons performed flexible reaming.

Included in the study were patients who underwent a primary ACLR without additional ligamentous reconstruction. Patients were excluded from final analysis of revision ACLR if they underwent any additional ligamentous reconstruction or if they had <2 years of postoperative follow-up. Patients without Lower Extremity Assessment Protocol (LEAP) testing were also excluded. LEAP testing is a standard part of the treatment and rehabilitation recommendation for all patients undergoing ACLR at our institution. The patients excluded for this reason represented a very small portion of the overall cases, as it was deemed standard of care for ACLR at the beginning of this study. All patients provided informed consent.

The primary outcome measure was graft rupture, which was identified via retrospective chart review to determine whether the patient had undergone a revision ACLR. When graft integrity beyond 2 years postoperatively was not able to be confirmed via chart review, the patient was contacted via telephone to determine whether or not revision ACLR had occurred. It can be assumed that both groups had a similar likelihood of undergoing revision within the minimum 2-year follow-up period, minimizing detection bias between groups.

The secondary outcome measures were examined by assessing functional performance per LEAP testing, which consisted of a battery of testing that directly evaluated the operative limb and the noninjured, contralateral side. These tests were performed at 6 months postoperatively for all included patients.

Lower Extremity Assessment Protocol

The LEAP at our institution consists of 3 parts: recording of patient-reported outcomes, measurement of flexion and extension strength, and hop testing.

Patient-Reported Outcomes

Upon enrollment, all participants completed the International Knee Documentation Committee (IKDC) Subjective Knee Evaluation Form and the Knee injury and Osteoarthritis Outcome Score (KOOS). The IKDC and KOOS are both well-established and validated patient-reported outcome scoring systems designed to assess patients' knee symptoms and function based on their pain, performance, quality of life, and activity level.

Knee Flexion and Extension Strength

Isokinetic, concentric knee extension and flexion strength was measured bilaterally using a Biodex Systems 4 multimode dynamometer (Biodex Medical Systems, Inc) at a speed of 90 deg/s. All testing was performed on the uninvolved limb, followed by testing of the involved limb. The participants completed practice trials on each limb for practice and familiarization. The participants provided maximal effort through their full range of motion for 8 trials. Measures of peak torque for knee extension and flexion were exported using the Biodex software and normalized to the participant’s body mass (N·m/kg). Symmetry measures were calculated as a ratio between the reconstructed limb and the contralateral limb and expressed as a percentage of the contralateral limb, where 100% indicated perfect symmetry.

Hop Testing

Each participant performed 4 single-leg hopping trials on each limb. Hop tests included single hop for maximal distance where participants were instructed to perform a single-hop straight forward as far as possible with a balanced on the landing (single hop). Participants also performed 3 consecutive hops in a straight line for maximal distance (triple hop) and 3 consecutive hops in a zigzag pattern for maximal distance. Finally, participants performed a timed hop where they were instructed to hop as quickly as possible for 6 m. Distances were measured in centimeters, time was measured in seconds, and symmetry was expressed as a percentage of the contralateral limb, as described.

Statistical Analysis

A post hoc power analysis was performed to determine the number of patients necessary to determine a significant difference in revision ACLR rates. To determine a 5% difference in the incidence of revision ACLR between the 2 groups, assuming an even distribution of patients in each group, alpha of .05, and 80% power, a total of 868 patients would be necessary. As this was a sample of opportunity with fewer patients available, a risk of underpowering was present.

Descriptive statistics, including mean, standard deviation, median, minimum, and maximum values, were calculated for all quantitative variables. Comparison of categorical data was performed using chi-square and Fisher exact tests for comparisons with small sample sizes. Comparisons of continuous data were performed using the Student t test for those that were normally distributed and the Mann-Whitney test as a nonparametric alternative for those that were not normally distributed. Statistical analyses were performed using IBM SPSS Statistics Version 26 (IBM Corp). For all comparisons, P < .05 was considered statistically significant.

Results

Cohort Characteristics

A total of 284 patients were identified for inclusion to this study, with 232 patients undergoing femoral tunnel creation using AAM-RR and 52 using AM-FR (Figure 1). The overall mean follow-up time was 3.7 ± 1.5 years. The mean follow-up time was significantly different between groups (AAM-RR, 4.0 ± 1.5 years; AM-FR, 2.5 ± 0.7 years; P < .001). Two-year follow-up was confirmed in 89.8% of patients overall. All data were present for all included patients, except for identification of minimum 2-year revision ACLR in patients without confirmed follow-up beyond 2 years.

Figure 1.

A flowchart of the study participants assessed for eligibility and determination of inclusion for final analysis. ACLR, anterior cruciate ligament reconstruction.

The flexible reamer and rigid reamer groups did not differ with regard to mean age, sex, body mass index (BMI), or patients who underwent concomitant surgical intervention on the meniscus (Table 1). Groups did differ significantly with regard to graft type, with 61.2% of patients in the AAM-RR group receiving a bone–patellar tendon–bone graft versus 76.9% of patients in the AM-FR group (P = .033). All other patients included in this analysis received a hamstring tendon graft.

TABLE 1

Patient Characteristics

	Overall (N = 284)	Flexible Reamer (n = 52)	Rigid Reamer (n = 232)	P
Age, y	21.6 ± 9.5	22.3 ± 9.1	21.5 ± 9.6	.584
Female sex	157 (55.3)	27 (51.9)	130 (56.0)	.590
BMI	24.8 ± 4.6	25.4 ± 4.4	24.7 ± 4.6	.318
Graft type, BTB:HS, n	182:102	40:12	142:90	.033
Meniscectomy	84 (29.6)	12 (23.1)	72 (31.0)	.256
Meniscal repair	124 (43.7)	18 (34.6)	106 (45.7)	.211
Timing of LEAP, mo	6.7 ± 2.3	6.2 ± 2.1	6.8 ± 2.5	.109
Follow-up, y	3.7 ± 1.5	2.5 ± 0.7	4.0 ± 1.5	<.001

Data are reported as mean ± SD or n (%) unless otherwise indicated. Bolded P values indicate a statistically significant difference between the study groups (P < .05). BMI, body mass index; BTB, bone–patellar tendon–bone; HS, hamstring; LEAP, Lower Extremity Assessment Protocol.

Revision ACLR Rate

With regard to the primary outcome of interest, there was no significant difference observed in the rate of revision ACLR between the use of AAM-RR and AM-FR for femoral tunnel creation during ACLR (AM-FR, 9.6%; AAM-RR, 10.8%; P = .806) (Table 2). The revision ACLR rate was also compared at 2.5 years postoperatively in both cohorts and was similarly not found to be significantly different (AM-FR, 9.1%; AAM-RR, 8.6%).

TABLE 2

Outcome Comparisons Between the Study Groups

	Overall	Flexible Reamer	Rigid Reamer	P
Primary outcome
Revision ACLR rate	30 (10.6)	5 (9.6)	25 (10.8)	.806
Extension measures
Normalized peak extension torque of 90°	1.55 ± 0.47	1.47 ± 0.47	1.57 ± 0.46	.159
LSI extension, %	69.5 ± 17.3	65.7 ± 17.2	70.3 ± 17.2	.126
Flexion measures
Normalized peak flexion torque of 90°	0.90 ± 0.27	0.89 ± 0.29	0.90 ± 0.27	.812
LSI flexion, %	93.1 ± 18.0	90.0 ± 19.6	93.8 ± 17.6	.157
Hop tests, %
LSI single hop	89.0 ± 13.0	89.2 ± 14.5	88.9 ± 12.6	.989
LSI triple hop	91.7 ± 11.1	91.4 ± 10.3	91.8 ± 11.2	.814
LSI timed hop	108.3 ± 22.5	108.5 ± 17.9	108.3 ± 23.3	.954
PRO scores at 6 mo
IKDC	80.7 ± 13.0	78.9 ± 11.7	81.1 ± 13.2	.269
KOOS	88.6 ± 9.2	86.7 ± 8.6	89.0 ± 9.3	.104

Data are reported as mean ± SD or n (%). ACLR, anterior cruciate ligament reconstruction; IKDC, International Knee Documentation Committee; LSI, limb symmetry index; KOOS, Knee injury and Osteoarthritis Outcome Score; PRO, patient-reported outcome.

LEAP and Patient-Reported Outcome Measures

Additionally, there were no significant differences found in 6-month knee extension strength and symmetry, knee flexion strength and symmetry, or hop testing between cohorts (Table 2). Additionally, no significant differences existed in mean IKDC score (AAM-RR, 81.1; AM-FR, 78.9; P = .269) or KOOS (AAM-RR, 89.0; AM-FR, 86.7; P = .104) between the use of AAM-RR and AM-FR for femoral tunnel creation (Table 2). There were no reported occurrences of posterior wall breakage or injuries to the posterolateral ligamentous or neurovascular structures in either group.

Discussion

The most important finding of this study was that the choice between AAM-RR and AM-FR did not result in a significant difference in revision ACLR rates at a minimum of 2 years postoperatively in this study. Additionally, no differences were found in functional testing or patient-reported outcomes at 6 months postoperatively. While radiographic and cadaveric studies have suggested that using AM-FR may result in a more anatomic ACL graft position with longer and more anteverted tunnels when compared with AAM-RR, this should only affect graft tunnel mismatch and not revision ACLR rates.

The use of AM-FR and AAM-RR has historically not been subdivided when comparing outcomes among various methods for femoral tunnel creation. Recently, however, several studies have suggested that AM-FR may result in a different ACL graft and femoral tunnel position compared with AAM-RR. A study by Jamsher et al compared sagittal and coronal graft inclination angles on magnetic resonance imaging scans in patients in whom ACLR was performed using AM-FR and AAM-RR and compared measurements to healthy controls. Those authors found that the sagittal graft inclination was significantly different between the AAM-RR (56.0° ± 6.1°) group and the healthy control group (49.3° ± 4.2°) but was not different between the AM-FR group (49.9° ± 5.0°) and the control group. Additionally, the mean angle reported for the AAM-RR group in that study fell outside the anatomic range validated by Illingworth et al, suggesting that AAM-RR resulted in tunnel placement outside of an anatomic range. Other studies by Steiner et al, Wein et al, and Larson et al have similarly found that AAM-RR results in a more vertical position of the femoral tunnel compared with AM-FR.

There is also evidence to suggest that the decreased constraint arising from using a flexible reamer in comparison with a rigid reamer may allow for longer femoral tunnels to be created while also placing tunnels at a greater distance from critical posterolateral knee structures. These differences in tunnel length are even more pronounced when the knee is placed in lesser degrees of flexion for femoral tunnel creation. Collectively, these findings suggest that the differences in technical constraint between the 2 techniques may result in a varying ability to anatomically re-create the ACL and therefore clinically affect knee kinematics and function, which could manifest in differing rates of revision ACLR.

Despite the aforementioned radiologic and anatomic differences reported, we found no difference in revision ACLR rates at a minimum of 2 years postoperatively or early outcomes between flexible and rigid reaming systems for independent femoral tunnel creation during ACLR. The revision ACLR rates reported at the final follow-up were similar in the AM-FR group (9.6%) and the AAM-RR group (10.8%). Because of the significantly longer mean follow-up time in the AAM-RR group, the revision ACLR rate was also compared at 2.5 years postoperatively in both cohorts and was similarly not found to be significantly different (AM-FR, 9.1%; AAM-RR, 8.6%). This finding of clinical equivalence with regard to revision ACLR rates, performance testing, and patient-reported outcomes is an important addition to the literature, as there are no previous studies that have directly compared revision ACLR rates or other clinical outcomes between the use of AM-FR and AAM-RR. Interestingly, while more anatomic graft positioning has consistently been demonstrated to improve knee kinematics and rotational stability, this has not always been demonstrated to translate into improved clinical outcomes.

A cohort study of 17,682 overall patients by Desai et al that was published in 2017 using data from the Swedish National Knee Ligament Register found that nonanatomic femoral tunnel placement via TT drilling resulted in a decreased risk of need for revision surgery compared with anatomic tunnel placement via transportal drilling. Another prospective study composed of data from the Danish Knee Ligament Reconstruction Register including 1945 and 6430 ACLR procedures performed either from an independent anteromedial portal or via TT drilling, respectively, found a greater risk of needing revision ACLR in the anteromedial cohort. One explanation for this finding is that transportal femoral tunnel drilling may result in a higher graft bending angle compared with TT drilling, therefore leading to increased stress on the bone-graft interface. Other studies have contradicted this finding, however. Given the discordance between these database studies and the biomechanical analyses, further large, prospective, randomized studies are warranted to better understand the effect of these techniques on biomechanical and clinical outcome.

Limitations

The methodology of this study has several limitations that may affect the findings. First, this study was underpowered, and a significant possibility of type 2 error exists. It was a sample of opportunity, and unfortunately the power cannot be improved. Second, its retrospective nature introduces the possibility that there exist confounding factors that were not adequately controlled between groups. One variable that differed between the groups is mean follow-up, which was significantly longer in the AAM-RR group, as this technique was used before AM-FR. This could potentially bias the results to have a greater incidence of failure in the AAM-RR group. There are additional factors that have been demonstrated to affect incidence of ACL graft failure postoperatively, such as graft size or patient activity level. The study groups were similar with regard to age, sex, BMI, and incidence of concomitant meniscal repair, however, which is suggestive that many potential patient and surgical characteristics may also have been relatively equivalent between groups.

Although there was a significant difference between groups with regard to graft type, prior study has not shown a difference in revision ACLR rates between bone–patellar tendon–bone and hamstring tendon grafts according to a much larger meta-analysis. While all included patients underwent primary ACLR without concomitant ligamentous reconstruction, it is important to highlight that no significant difference in incidence of meniscal repair existed between groups. At our institution, patients undergoing concomitant meniscal repair are managed with a different rehabilitation protocol than are patients undergoing ACLR without meniscal repair. The study cohorts also differed with regard to size. This discrepancy existed based on the preferred surgical technique of the respective surgeons at our institution, which also may have introduced bias. It remains unclear how having less disparate cohort sizes would have affected our results; however, given the minimal differences in the outcomes observed in this study, there would need to be significantly more included patients in order to detect any significant difference.

Another limitation of this study is that while previous literature exists to suggest that ACLR using AM-FR for femoral tunnel trends toward resulting in a more anatomic ACLR, this study lacks direct radiologic evidence that this difference manifested within our study population. Finally, as a literature review shows that the radiologic and anatomic differences resulting from AM-FR and AAM-RR are more evident when deep flexion is unable to be achieved, it is possible that there would have been a difference observed in patients with less intrinsic flexibility, such as patients who are more muscular or have larger body habitus. This study is more representative of the overall population undergoing ACLR, however, and is therefore more translatable than isolated subgroup analysis based on revision procedures or a certain population characteristic.

Despite these limitations, the novelty and clinical significance of the findings in this study make it an important addition to the literature. Further, the validity of the study is strengthened by its mean follow-up time of 3.7 years, with an overall 2-year follow-up of 90.8%. This excellent follow-up time and incidence greatly decreases the possibility that not capturing the incidence of revision ACLR would have affected the findings of the study. Additionally, the use of both structured performance testing and validated patient-reported outcome scores reinforces this study’s finding that no significant differences in clinical functional outcome arose based on the choice of flexible versus rigid reamers for ACLR.

Conclusion

In this limited study, independent femoral tunnel drilling for ACLR using rigid or flexible reaming systems resulted in comparable rates of revision ACLR at a minimum of 2 years postoperatively and no significant differences in strength assessments or patient-reported outcomes at 6 months postoperatively.