Literature DB >> 33302527

Sustained Calcium(II)-Release to Impart Bioactivity in Hybrid Glass Scaffolds for Bone Tissue Engineering.

Dzmitry Kuzmenka1, Claudia Sewohl1, Andreas König2, Tobias Flath3, Sebastian Hahnel2, Fritz Peter Schulze3, Michael C Hacker1,4, Michaela Schulz-Siegmund1.   

Abstract

In this study, we integrated different calcium sources into sol-gel hybrid glass scaffolds with the aim of producing implants with long-lasting calcium release while maintaining mechanical strength of the implant. Calcium(II)-release was used to introduce bioactivity to the material and eventually support implant integration into a bone tissue defect. Tetraethyl orthosilicate (TEOS) derived silica sols were cross-linked with an ethoxysilylated 4-armed macromer, pentaerythritol ethoxylate and processed into macroporous scaffolds with defined pore structure by indirect rapid prototyping. Triethyl phosphate (TEP) was shown to function as silica sol solvent. In a first approach, we investigated the integration of 1 to 10% CaCl2 in order to test the hypothesis that small CaCl2 amounts can be physically entrapped and slowly released from hybrid glass scaffolds. With 5 and 10% CaCl2 we observed an extensive burst release, whereas slightly improved release profiles were found for lower Calcium(II) contents. In contrast, introduction of melt-derived bioactive 45S5 glass microparticles (BG-MP) into the hybrid glass scaffolds as another Calcium(II) source led to an approximately linear release of Calcium(II) in Tris(hydroxymethyl)aminomethane (TRIS) buffer over 12 weeks. pH increase caused by BG-MP could be controlled by their amount integrated into the scaffolds. Compression strength remained unchanged compared to scaffolds without BG-MP. In cell culture medium as well as in simulated body fluid, we observed a rapid formation of a carbonated hydroxyapatite layer on BG-MP containing scaffolds. However, this mineral layer consumed the released Calcium(II) ions and prevented an additional increase in Calcium(II) concentration in the cell culture medium. Cell culture studies on the different scaffolds with osteoblast-like SaOS-2 cells as well as bone marrow derived mesenchymal stem cells (hMSC) did not show any advantages concerning osteogenic differentiation due to the integration of BG-MP into the scaffolds. Nonetheless, via the formation of a hydroxyapatite layer and the ability to control the pH increase, we speculate that implant integration in vivo and bone regeneration may benefit from this concept.

Entities:  

Keywords:  Calcium(II) release; bioactivity; bone tissue engineering; hybrid glass scaffolds; sol-gel

Year:  2020        PMID: 33302527      PMCID: PMC7764395          DOI: 10.3390/pharmaceutics12121192

Source DB:  PubMed          Journal:  Pharmaceutics        ISSN: 1999-4923            Impact factor:   6.321


  57 in total

1.  The story of Bioglass.

Authors:  Larry L Hench
Journal:  J Mater Sci Mater Med       Date:  2006-11-22       Impact factor: 3.896

Review 2.  Tackling bioactive glass excessive in vitro bioreactivity: Preconditioning approaches for cell culture tests.

Authors:  Francesca E Ciraldo; Elena Boccardi; Virginia Melli; Fabian Westhauser; Aldo R Boccaccini
Journal:  Acta Biomater       Date:  2018-05-21       Impact factor: 8.947

Review 3.  Review of bioactive glass: from Hench to hybrids.

Authors:  Julian R Jones
Journal:  Acta Biomater       Date:  2012-08-21       Impact factor: 8.947

4.  Strategies for the chemical analysis of highly porous bone scaffolds using secondary ion mass spectrometry.

Authors:  Daming Wang; Gowsihan Poologasundarampillai; Wouter van den Bergh; Richard J Chater; Toshihiro Kasuga; Julian R Jones; David S McPhail
Journal:  Biomed Mater       Date:  2014-01-23       Impact factor: 3.715

5.  Osteogenic differentiation of umbilical cord and adipose derived stem cells onto highly porous 45S5 Bioglass®-based scaffolds.

Authors:  Rainer Detsch; Sonja Alles; Jasmin Hum; Peter Westenberger; Frank Sieker; Dominik Heusinger; Cornelia Kasper; Aldo R Boccaccini
Journal:  J Biomed Mater Res A       Date:  2014-06-14       Impact factor: 4.396

6.  Controlling particle size in the Stöber process and incorporation of calcium.

Authors:  Sarah L Greasley; Samuel J Page; Slobodan Sirovica; Shu Chen; Richard A Martin; Antonio Riveiro; John V Hanna; Alexandra E Porter; Julian R Jones
Journal:  J Colloid Interface Sci       Date:  2016-02-03       Impact factor: 8.128

7.  The pH in the microenvironment of human mesenchymal stem cells is a critical factor for optimal osteogenesis in tissue-engineered constructs.

Authors:  Laurent-Emmanuel Monfoulet; Pierre Becquart; David Marchat; Katleen Vandamme; Marianne Bourguignon; Elodie Pacard; Véronique Viateau; Herve Petite; Delphine Logeart-Avramoglou
Journal:  Tissue Eng Part A       Date:  2014-02-24       Impact factor: 3.845

8.  Direct chemical bond of bioactive glass-ceramic materials to bone and muscle.

Authors:  L L Hench; H A Paschall
Journal:  J Biomed Mater Res       Date:  1973

9.  Coating of VEGF-releasing scaffolds with bioactive glass for angiogenesis and bone regeneration.

Authors:  J Kent Leach; Darnell Kaigler; Zhuo Wang; Paul H Krebsbach; David J Mooney
Journal:  Biomaterials       Date:  2006-02-21       Impact factor: 12.479

10.  Bioactive sol-gel glasses with and without a hydroxycarbonate apatite layer as substrates for osteoblast cell adhesion and proliferation.

Authors:  Nieves Olmo; Ana I Martín; Antonio J Salinas; Javier Turnay; María Vallet-Regí; M Antonia Lizarbe
Journal:  Biomaterials       Date:  2003-09       Impact factor: 12.479

View more
  1 in total

Review 1.  In Vivo Bone Tissue Engineering Strategies: Advances and Prospects.

Authors:  Ilya L Tsiklin; Aleksey V Shabunin; Alexandr V Kolsanov; Larisa T Volova
Journal:  Polymers (Basel)       Date:  2022-08-08       Impact factor: 4.967

  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.