Literature DB >> 33244659

False profile view is independently associated with serum metal levels in patients with metal-on-metal hip arthroplasty.

Arne Borgwardt1, Bo Madvig Larsen2, Søren Ribel-Madsen1, Bo Zerahn3.   

Abstract

PURPOSE: Elevated levels of serum metal ions can be found in some patients with metal-on-metal (MoM) hip replacements. This study seeks to identify whether there is a significant association between the contact patch to rim distance (CPRD) and the anterior center edge angle (ACEA), respectively, and serum cobalt (Co) and chromium (Cr) levels in patients treated with unilateral MoM hip replacements by using standing anteroposterior and false profile view radiographs.
METHODS: This is a retrospective analysis on 53 patients with either unilateral ReCap or M2a-Magnum MoM hip replacements operated in 2006 or 2007. Univariate linear regression and multivariable linear regression (MLR) analyses were performed using the CPRD and ACEA along with risk factors for elevated serum levels of Co and Cr previously suggested in the literature as explanatory variables. Serum Co and Cr were measured using inductively coupled plasma mass spectrometry.
RESULTS: The MLR model showed that the same three variables (gender, CPRD and ACEA) were significantly associated with serum levels of both Co and Cr explaining approximately half of the variation. A univariate analysis showed a polynomial association between both anteversion angle and the ACEA with serum levels of Co and Cr. The vertex of the polynomial function was located at approximately 20° and 40°, respectively.
CONCLUSION: Gender, CPRD and ACEA are independently associated with serum levels of Co and Cr. Both ACEA and anteversion angles have optimae associated with low serum metal levels which may be useful for post-surgery evaluation of cup positioning.
© 2020. Springer-Verlag France SAS, part of Springer Nature.

Entities:  

Keywords:  Anterior center edge angle; Chromium; Cobalt; Contact patch to rim distance; False profile view; Metal-on-metal prostheses; Total hip arthroplasty

Year:  2020        PMID: 33244659     DOI: 10.1007/s00590-020-02839-4

Source DB:  PubMed          Journal:  Eur J Orthop Surg Traumatol        ISSN: 1633-8065


  19 in total

1.  Accuracy and reliability of different methods to evaluate the acetabular cup version from plain radiographs.

Authors:  Maximilian Haenle; Wolfram Mittelmeier; Rodrigo Barbano; Klaus Wörtler; Roger Scholz; Rainer Bader
Journal:  Surg Radiol Anat       Date:  2010-06-25       Impact factor: 1.246

2.  Influence of cup orientation on the wear performance of metal-on-metal hip replacements.

Authors:  A Angadji; M Royle; S N Collins; J C Shelton
Journal:  Proc Inst Mech Eng H       Date:  2009-05       Impact factor: 1.617

Review 3.  Contact patch to rim distance: the quintessential tool for metal-on-metal bearing in vivo performance analysis - a review.

Authors:  Michel J Le Duff; Edward Ebramzadeh; Harlan C Amstutz
Journal:  Hip Int       Date:  2017-05-05       Impact factor: 2.135

4.  Optimal bearing surfaces for total hip replacement in the young patient: a meta-analysis.

Authors:  Vijay Shetty; Bhushan Shitole; Gautam Shetty; Harshad Thakur; Mohit Bhandari
Journal:  Int Orthop       Date:  2010-08-05       Impact factor: 3.075

5.  Insufficient acetabular version increases blood metal ion levels after metal-on-metal hip resurfacing.

Authors:  Alister J Hart; John A Skinner; Johann Henckel; Barry Sampson; Fabiana Gordon
Journal:  Clin Orthop Relat Res       Date:  2011-06-09       Impact factor: 4.176

6.  Failure rates of metal-on-metal hip resurfacings: analysis of data from the National Joint Registry for England and Wales.

Authors:  Alison J Smith; Paul Dieppe; Peter W Howard; Ashley W Blom
Journal:  Lancet       Date:  2012-10-02       Impact factor: 79.321

7.  Predicting wear and blood metal ion levels in metal-on-metal hip resurfacing.

Authors:  Ashley K Matthies; Johann Henckel; Suzie Cro; Alexander Suarez; Philip C Noble; John Skinner; Alister J Hart
Journal:  J Orthop Res       Date:  2013-09-21       Impact factor: 3.494

8.  Edge loading in metal-on-metal hips: low clearance is a new risk factor.

Authors:  Richard J Underwood; Angelos Zografos; Ritchie S Sayles; Alister Hart; Philippa Cann
Journal:  Proc Inst Mech Eng H       Date:  2012-03       Impact factor: 1.617

Review 9.  Choice of implant combinations in total hip replacement: systematic review and network meta-analysis.

Authors:  José A López-López; Rachel L Humphriss; Andrew D Beswick; Howard H Z Thom; Linda P Hunt; Amanda Burston; Christopher G Fawsitt; William Hollingworth; Julian P T Higgins; Nicky J Welton; Ashley W Blom; Elsa M R Marques
Journal:  BMJ       Date:  2017-11-02

10.  Effect of femoral head size on the wear of metal on metal bearings in total hip replacements under adverse edge-loading conditions.

Authors:  Mazen Al-Hajjar; John Fisher; Sophie Williams; Joanne L Tipper; Louise M Jennings
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2012-12-20       Impact factor: 3.368

View more
  1 in total

1.  Median 10-year whole blood metal ion levels and clinical outcome of ReCap-M2a-Magnum metal-on-metal total hip arthroplasty.

Authors:  Sakari Pietiläinen; Axel Linnovaara; Mikko S Venäläinen; Heikki Mäntymäki; Inari Laaksonen; Petteri Lankinen; Keijo T Mäkelä
Journal:  Acta Orthop       Date:  2022-04-19       Impact factor: 3.925

  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.