Literature DB >> 33219882

Posterior unilateral exposure and stability reconstruction with pedicle and lamina screw fixation for the cervical dumbbell tumorectomy: a case report and biomechanical study.

Wei Ji1, Yongquan Cheng1, Qingan Zhu1, Zhiping Huang1, Junyu Lin1, Dehong Yang1, Ruoting Ding1, Mingui Bao1, Jianting Chen1, Hui Jiang2.   

Abstract

PURPOSE: Cervical dumbbell tumor is usually removed via a posterior approach and may require the spinal fixation sometimes. However, the present surgical methods involved either more trauma or a higher risk of instability of the cervical spine. A new technique of unilateral exposure and stability reconstruction with pedicle and lamina screws fixation for posterior cervical dumbbell tumorectomy was described and compared with conventional techniques.
METHODS: Posterior unilateral exposure, hemi-laminectomy and facetectomy were performed in one patient with the cervical dumbbell tumor between C3 and C4. The stability was reconstructed by the unilateral pedicle and lamina screws fixation (UPLS), and a strip of shaped allograft bone was also implanted between the superior and inferior lateral mass. Biomechanical stability test of this new technique was investigated using seven fresh-frozen human cervical spine specimens (C4-C7) and compared with unilateral pedicle screw (UPS) and bilateral pedicle screw fixation (BPS) techniques. A continuous pure moment of ± 2.0 Nm was applied to the specimen in flexion, extension, lateral bending and axial rotation.
RESULTS: The cervical dumbbell tumor was removed completely, and bone fusion with continuous bone trabecula was maintained in the patient on the final follow-up examination at 18 months postoperatively. Biomechanical stability tests revealed that the range of motion of the UPLS fixation plus graft bone implant was the same as the BPS fixation in flexion (1.8°vs. 1.5°, p = 0.58) and extension (2.3°vs. 2.2°, p = 0.73), but significantly bigger in lateral bending (3.9° vs. 1.0°, p < 0.001) and axial rotation (6.8° vs. 3.8°, p = 0.002), which were significantly smaller than the UPS fixation in all directions (all p < 0.001).
CONCLUSIONS: For the treatment of cervical dumbbell tumor, posterior unilateral exposure and stability reconstruction with pedicle and lamina screws fixation following hemi-laminectomy and facetectomy appear to be a more stable and lesser trauma technique. LEVEL OF EVIDENCE: Diagnostic: individual cross-sectional studies with consistently applied reference standard and blinding.

Entities:  

Keywords:  Biomechanical stability; Cervical spine; Dumbbell tumor; Mechanical testing

Year:  2020        PMID: 33219882     DOI: 10.1007/s00586-020-06668-1

Source DB:  PubMed          Journal:  Eur Spine J        ISSN: 0940-6719            Impact factor:   3.134


  16 in total

1.  A novel application of velocity-based force control for use in robotic biomechanical testing.

Authors:  Darrell J Goertzen; Gregory N Kawchuk
Journal:  J Biomech       Date:  2009-01-04       Impact factor: 2.712

2.  Testing criteria for spinal implants: recommendations for the standardization of in vitro stability testing of spinal implants.

Authors:  H J Wilke; K Wenger; L Claes
Journal:  Eur Spine J       Date:  1998       Impact factor: 3.134

3.  Cervical stability after sequential capsule resection.

Authors:  T A Zdeblick; J J Abitbol; D N Kunz; R P McCabe; S Garfin
Journal:  Spine (Phila Pa 1976)       Date:  1993-10-15       Impact factor: 3.468

4.  Surgical nuances on the treatment of giant dumbbell cervical spine schwannomas: description of a challenging case and review of the literature.

Authors:  Domenico Gerardo Iacopino; Antonella Giugno; Carlo Gulì; Luigi Basile; Francesca Graziano; Rosario Maugeri
Journal:  Spinal Cord Ser Cases       Date:  2016-04-07

5.  Spinal dumbbell tumors: an analysis of a series of 118 cases.

Authors:  Hiroshi Ozawa; Shoichi Kokubun; Toshimi Aizawa; Takeshi Hoshikawa; Chikashi Kawahara
Journal:  J Neurosurg Spine       Date:  2007-12

6.  Results of surgical treatment of cervical dumbbell tumors: surgical approach and development of an anatomic classification system.

Authors:  Liang Jiang; Yang Lv; Xiao Guang Liu; Qing Jun Ma; Feng Wei; Geng Ting Dang; Zhong Jun Liu
Journal:  Spine (Phila Pa 1976)       Date:  2009-05-20       Impact factor: 3.468

7.  Microsurgical management of spinal schwannomas: evaluation of 128 cases.

Authors:  Sam Safavi-Abbasi; Mehmet Senoglu; Nicholas Theodore; Ryan K Workman; Alireza Gharabaghi; Iman Feiz-Erfan; Robert F Spetzler; Volker K H Sonntag
Journal:  J Neurosurg Spine       Date:  2008-07

8.  Posterior Hemi-/Laminectomy and Facetectomy Approach for the Treatment of Dumbbell-Shaped Schwannomas in the Subaxial Cervical Spine: A Retrospective Study of 26 Cases.

Authors:  Yong Huang; Zuowei Wang; Zan Chen; Hao Wu; Fengzeng Jian
Journal:  Eur Neurol       Date:  2017-09-12       Impact factor: 1.710

9.  Intra-extradural plexiform schwannoma of the cervical spine.

Authors:  Hironobu Sakaura; Kazuya Ohshima; Motoki Iwasaki; Hideki Yoshikawa
Journal:  Spine (Phila Pa 1976)       Date:  2007-10-01       Impact factor: 3.468

10.  Unilateral instrumented fixation for cervical dumbbell tumors.

Authors:  Kei Ando; Shiro Imagama; Zenya Ito; Kazuyoshi Kobayashi; Junichi Ukai; Akio Muramoto; Ryuichi Shinjo; Tomohiro Matsumoto; Hiroaki Nakashima; Yoshihiro Nishida; Naoki Ishiguro
Journal:  J Orthop Surg Res       Date:  2014-01-20       Impact factor: 2.359

View more
  1 in total

1.  Reconstruction of the Cervical Lateral Mass Using 3-Dimensional-Printed Prostheses.

Authors:  Qiang Jian; Zhenlei Liu; Wanru Duan; Jian Guan; Fengzeng Jian; Zan Chen
Journal:  Neurospine       Date:  2022-02-02
  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.