Kangaroo rat locomotion: design for elastic energy storage or acceleration?

Mechanical stresses (force/cross-sectional area) acting in muscles, tendons and bones of the hindlimbs of kangaroo rats (Dipodomys spectabilis) were calculated during steady-speed hops and vertical jumps. Stresses were determined from both high-speed ciné films (light and X-ray) and force plate recordings, as well as from in vivo tendon force recordings. Stresses in each hindlimb support element during hopping (1.6-3.1 m s-1) were generally only 33% of those acting during jumping (greater than or equal to 40 cm height): ankle extensor muscles, 80 +/- 12 (S.D.) versus 297 +/- 42 kPa; ankle extensor tendons, 7.9 +/- 1.5 versus 32.7 +/- 4.8 MPa; tibia, -29 +/- 5 versus -110 +/- 25 MPa (all values are for hopping versus jumping). The magnitude of stress in each structure during these locomotor activities was similarly matched to the strength of each element, so that a consistent safety factor to failure is achieved for the hindlimb as a whole (1.5-2.0). The large stresses during jumping were correlated with a three-fold increase in ground reaction forces exerted on the ground compared with the fastest steady hopping speeds. We conclude that, for its size, the kangaroo rat has disproportionately large hindlimb muscles, tendons and bones to withstand the large forces associated with rapid acceleration to avoid predation, which limits their ability to store and recover elastic strain energy. Middle ear morphology and behavioural observations of kangaroo rats jumping vertically to avoid predation by owls and rattlesnakes support this view.