James R Couch1, George R Grimes1,2, Douglas M Wiegand1, Brett J Green, Eric K Glassford1, Leonard M Zwack1, Angela R Lemons3, Stephen R Jackson3, Donald H Beezhold3. 1. Division of Field Studies and Engineering, National Institute for Occupational Safety and Health, Centers for Disease Control and Prevention, Cincinnati, Ohio. 2. Epidemic Intelligence Service, Center of Surveillance, Epidemiology, and Laboratory Services, Centers for Disease Control and Prevention, Cincinnati, Ohio. 3. Health Effects Laboratory Division, National Institute for Occupational Safety and Health, Centers for Disease Control and Prevention, Morgantown, West Virginia.
Abstract
BACKGROUND: Cannabis has been legalized in some form for much of the United States. The National Institute for Occupational Safety and Health (NIOSH) received a health hazard evaluation request from a Minnesota cannabis facility and their union to undertake an evaluation. METHODS: NIOSH representatives visited the facility in August 2016 and April 2017. Surface wipe samples were collected for analysis of delta-9 tetrahydrocannabinol (Δ9-THC), delta-9 tetrahydrocannabinol acid (Δ9-THCA), cannabidiol, and cannabinol. Environmental air samples were collected for volatile organic compounds (VOCs), endotoxins (limulus amebocyte lysate assay), and fungal diversity (NIOSH two-stage BC251 bioaerosol sampler with internal transcribed spacer region sequencing analysis). RESULTS: Surface wipe samples identified Δ9-THC throughout the facility. Diacetyl and 2,3-pentanedione were measured in initial VOC screening and subsequent sampling during tasks where heat transference was greatest, though levels were well below the NIOSH recommended exposure limits. Endotoxin concentrations were highest during processing activities, while internal transcribed spacer region sequencing revealed that the Basidiomycota genus, Wallemia, had the highest relative abundance. CONCLUSIONS: To the authors' knowledge, this is the first published report of potential diacetyl and 2,3-pentanedione exposure in the cannabis industry, most notably during cannabis decarboxylation. Endotoxin exposure was elevated during grinding, indicating that this is a potentially high-risk task. The findings indicate that potential health hazards of significance are present during cannabis processing, and employers should be aware of potential exposures to VOCs, endotoxin, and fungi. Further research into the degree of respiratory and dermal hazards and resulting health effects in this industry is recommended. Published 2019. This article is a U.S. Government work and is in the public domain in the USA.
BACKGROUND: Cannabis has been legalized in some form for much of the United States. The National Institute for Occupational Safety and Health (NIOSH) received a health hazard evaluation request from a Minnesota cannabis facility and their union to undertake an evaluation. METHODS: NIOSH representatives visited the facility in August 2016 and April 2017. Surface wipe samples were collected for analysis of delta-9 tetrahydrocannabinol (Δ9-THC), delta-9 tetrahydrocannabinol acid (Δ9-THCA), cannabidiol, and cannabinol. Environmental air samples were collected for volatile organic compounds (VOCs), endotoxins (limulus amebocyte lysate assay), and fungal diversity (NIOSH two-stage BC251 bioaerosol sampler with internal transcribed spacer region sequencing analysis). RESULTS: Surface wipe samples identified Δ9-THC throughout the facility. Diacetyl and 2,3-pentanedione were measured in initial VOC screening and subsequent sampling during tasks where heat transference was greatest, though levels were well below the NIOSH recommended exposure limits. Endotoxin concentrations were highest during processing activities, while internal transcribed spacer region sequencing revealed that the Basidiomycota genus, Wallemia, had the highest relative abundance. CONCLUSIONS: To the authors' knowledge, this is the first published report of potential diacetyl and 2,3-pentanedione exposure in the cannabis industry, most notably during cannabis decarboxylation. Endotoxin exposure was elevated during grinding, indicating that this is a potentially high-risk task. The findings indicate that potential health hazards of significance are present during cannabis processing, and employers should be aware of potential exposures to VOCs, endotoxin, and fungi. Further research into the degree of respiratory and dermal hazards and resulting health effects in this industry is recommended. Published 2019. This article is a U.S. Government work and is in the public domain in the USA.
Authors: Brett J Green; James R Couch; Angela R Lemons; Nancy C Burton; Kerton R Victory; Ajay P Nayak; Donald H Beezhold Journal: J Occup Environ Hyg Date: 2018-05 Impact factor: 2.155
Authors: E Zuskin; B Kanceljak; E N Schachter; T J Witek; S Maayani; S Goswami; Z Marom; N Rienzi Journal: Environ Res Date: 1992-12 Impact factor: 6.498
Authors: Kevin McKernan; Jessica Spangler; Yvonne Helbert; Ryan C Lynch; Adrian Devitt-Lee; Lei Zhang; Wendell Orphe; Jason Warner; Theodore Foss; Christopher J Hudalla; Matthew Silva; Douglas R Smith Journal: F1000Res Date: 2016-10-07
Authors: Ine I Decuyper; Brett J Green; Gordon L Sussman; Didier G Ebo; William S Silvers; Karin Pacheco; Bradley S King; John R Cohn; Robert S Zeiger; Joanna S Zeiger; David R Naimi; Donald H Beezhold; Ajay P Nayak Journal: J Allergy Clin Immunol Pract Date: 2020 Nov - Dec
Authors: Gordon L Sussman; Donald H Beezhold; John R Cohn; William S Silvers; Joanna S Zeiger; Ajay P Nayak Journal: Ann Work Expo Health Date: 2020-08-06 Impact factor: 2.179
Authors: Coralynn Sack; Niloufar Ghodsian; Karen Jansen; Brynne Silvey; Christopher D Simpson Journal: Ann Work Expo Health Date: 2020-08-06 Impact factor: 2.779