| Literature DB >> 31043636 |
Fazila Rizvi1, Majid Khan1, Almas Jabeen2, Hina Siddiqui3, M Iqbal Choudhary4,5,6.
Abstract
A library of thiosemicarbazide derivatives of isoniazid 3-27, was synthesized and evaluated for their anti-inflammatory and urease inhibition activities, by using in vitro bioassays. Among these compounds 9, 10, 12, 21, and 26 were identified as new derivatives. Prolonged use of non-steroidal anti-inflammatory drugs (NSAIDs) and infections caused by Helicobacter pylori (ureolytic bacteria), are the two most significant causes of gastric and peptic ulcers. We focused on the identification of the dual inhibitors of inflammation and urease enzyme. Compound 23 was identified as the best dual inhibitor of inflammation (ROS; IC50 = 12.3 µg/mL), and urease enzyme inhibition activity (IC50 = 22.4 µM). Many of these compounds showed comparable activities to the standard anti-inflammatory drug (ibuprofen, IC50 = 11.2 µg/mL) and urease inhibitor (thiourea/acetohydraoxamic acid, IC50 = 21.1/20.3 µM). Compound 12 was found to be the most potent urease inhibitor (IC50 = 12.3 µM) and good inhibitor of inflammation (IC50 = 27.7 µg/mL). Compounds 19, 11, 13, 9, 17, 10, and 16, were also found to be potent inhibitors of urease. Cytotoxicity was also evaluated and all the compounds were found to be non-cytotoxic, except compound 18 and the parent drug isoniazid (IC50 = 29.5 and 28.5 µM, respectively).Entities:
Mesh:
Substances:
Year: 2019 PMID: 31043636 PMCID: PMC6494997 DOI: 10.1038/s41598-019-43082-0
Source DB: PubMed Journal: Sci Rep ISSN: 2045-2322 Impact factor: 4.379
Figure 1Examples of Non-Steroidal Anti-inflammatory Drugs.
Figure 2Examples of Urease Inhibitors Used as Anti-Ulcer Drugs.
Figure 3Some previously reported derivatives of isoniazid.
Figure 4Component structural similarities between isoniazid, etoricoxib, and pantoprazole.
Figure 5Isoniazid (1).
Figure 6Synthesis of thiosemicarbazide derivatives of isoniazid (3–27).
Figure 7NMR and Key 2D NOSEY correlations of N-(2, 3-Dichlorophenyl)−2-isonicotinoylhydrazinecarbothioamide (4).
In vitro urease Inhibition, anti-inflammatory, and cytotoxicity of synthetic compounds 3–27.
| Compounds | R | Urease Inhibition Activity IC50 ± SEMa µM | Anti-Inflammatory Activity IC50 ± SDb µg/mL | Cytotoxicity (3T3 Cell line) IC50 ± SDb µM |
|---|---|---|---|---|
| 3 |
| Inactivec | Inactive | >30 |
| 4 |
| 38.8 ± 0.35 | Inactive | >30 |
| 5 |
| 36.5 ± 0.14 | 18.5 ± 1.0 | >30 |
| 6 |
| Insoluble | Inactive | >30 |
| 7 |
| 46.3 ± 0.43 | Inactive | >30 |
| 8 |
| 44.4 ± 0.43 | Inactive | >30 |
| 9 |
| 14.2 ± 1.38 | 26.7 ± 2.5 | >30 |
| 10 |
| 15.7 ± 1.32 | Inactive | >30 |
| 11 |
| 13.2 ± 1.64 | Inactive | >30 |
| 12 |
| 12.3 ± 1.04 | 27.7 ± 2.4 | >30 |
| 13 |
| 13.6 ± 1.61 | Inactive | >30 |
| 14 |
| 35.8 ± 1.89 | Inactive | >30 |
| 15 |
| 34.1 ± 0.45 | Inactive | >30 |
| 16 |
| 21.5 ± 1.3 | 29.7 ± 1.7 | >30 |
| 17 |
| 14.7 ± 1.01 | 36.9 ± 3.0 | >30 |
| 18 |
| 26.3 ± 1.59 | Inactive | 29.5 ± 1.9 |
| 19 |
| 12.7 ± 0.8 | Inactive | >30 |
| 20 |
| 22.0 ± 1.15 | Inactive | >30 |
| 21 |
| 28.2 ± 1.48 | Inactive | >30 |
| 22 |
| 22.1 ± 1.91 | 25.1 ± 0.4 | >30 |
| 23 |
| 22.4 ± 1.83 | 12.3 ± 1.2 | >30 |
| 24 |
| 63.2 ± 2.0 | Inactive | >30 |
| 25 |
| Insoluble | Inactive | >30 |
| 26 |
| 46.8 ± 1.8 | 25.4 ± 1.3 | >30 |
| 27 |
| Insolubled | Inactive | >30 |
| 28 | Isoniazid(1) | Inactive | Inactive | 28.5 ± 1.2 |
| 29 | Thiourea (Standard) | 21.1 ± 0.2 (Observed) | — | — |
| 30 | Aetohydaoxamic acid (standard) | 20.3 ± 0.4 (Observed) 17.2 ± 0.9 (Reported) | ||
| 31 | Ibuprofen (Standard) | — | 11.2 ± 1.9 (observed) 12.97 ± 0.23 (reported) | — |
| 32 | Cyclohexanamide (Standard) | — | — | 0.8 ± 0.2 (observed) 0.26 ± 0.04 (reported) |
SEMa is the standard error of the mean, SD is the standard deviation, and Insoluble refers to those analogue which are partially soluble in HPLC methanol used in the protocol of in vitro urease inhibition activity.
Compounds showed <50% inhibition were considered as inactive.
For Urease enzyme inhibition activity, screening concentration was 0.5 mM.
For ROS inhibition assay screening concentration was 25 µg/mL.
Note: All data were presented as mean ± standard deviation/standard error of the mean of three independent experiments where each sample was run in triplicate. The IC50 values were obtained using three concentrations of test compound, and were calculated using Excel Based Program.
Figure 8Rationale of the biological activity.