| Literature DB >> 30718790 |
Yijun Yao1, Hongru Wang2, Ruirui Wang1, Yong Chai1.
Abstract
Gelatin-coupled cellulose (Entities:
Mesh:
Substances:
Year: 2019 PMID: 30718790 PMCID: PMC6362078 DOI: 10.1038/s41598-018-37848-1
Source DB: PubMed Journal: Sci Rep ISSN: 2045-2322 Impact factor: 4.379
Figure 1Process for the preparation of the CA-based composite films.
Figure 2The particle size distribution (a), and SEM image (b) of GCC microgel. (In the illustration of (b), the left side image is GCC microgel solution, and the right side image is the bottom of the GCC microgel after standing for 1 month).
Figure 3SEM images of the cross sections of CA (a), GCC-CA-6% (b), GCC-CA-9% (c), GCC-CA-12% (d), GCC-CA-15% (e), and GCC (f) films. Note the yellow arrows designate the pores of casein film, and the red arrows point to GCC microgel.
Figure 4FT-IR spectra of CA-based composite films.
Figure 5X-ray diffraction patterns of CA, GCC-CA-6%, GCC-CA-9%, GCC-CA-12%, and GCC.
Figure 6Optical transmittance spectra of CA-based composite films at 200 to 800 nm wavelength.
Figure 7DSC curves of the GCC, CA, and GCC-CA-12% films.
Figure 8Contact angle images on CA-based film surfaces. (a) CA, (b) GCC-CA-3%, (c) GCC-CA-6%, (d) GCC-CA-9%, (e) GCC-CA-12%, and (f) GCC-CA-15%.
Figure 9Comparison of equilibrium moisture absorption of the CA-based composite films with different content of GCC (a) and the effects of GCC content on the WVP of the CA-based composite films under different relative humidity.
Figure 10Tensile stress-strain curves of CA, GCC-CA-3%, GCC-CA-6%, GCC-CA-9%, GCC-CA-12%, and GCC-CA-15% films (a) and Young’s modulus values of CA-based composite films (b).