| Literature DB >> 30368567 |
Tomasz Baron1,2,3, Lars Berglund4,5, Eva-Maria Hedin6, Frank A Flachskampf6.
Abstract
BACKGROUND: Reliability of left ventricular function measurements depends on actual biological conditions, repeated registrations and their analyses.Entities:
Keywords: Ejection fraction; Global longitudinal strain; Left ventricular function; Mitral annulus plane systolic excursion; Test–retest reliability
Mesh:
Year: 2018 PMID: 30368567 PMCID: PMC6426804 DOI: 10.1007/s00392-018-1363-7
Source DB: PubMed Journal: Clin Res Cardiol ISSN: 1861-0684 Impact factor: 5.460
Fig. 1Study design. Standard echo sequences were acquired independently by two different, echocardiographers. Both image sets (acquisition 1 and 2) were then analyzed by two independent readers creating 4 data sets per patient (acquisition 1/reading 1, acquisition 1/reading 2, acquisition 2/reading 1 and acquisition 2/reading 2). Intra-class Correlation Coefficient (ICC) for single measures was calculated globally for the 4 image sets and then separately for two different acquisitions analyzed by the same reader (inter-acquisition reliability, ICCacq) and two different readers analyzing the same acquisition (inter-reader reliability, ICCread). For estimation of intra-subject variability, the standard deviation of the four measurements of each parameter in each patient was calculated. The mean of these intra-subject standard deviations resulted in the standard error of measurements (SEM) for the whole studied group. The smallest detectable change (SDC) is then calculated as 1.96 × SEM, representing the minimal difference between the measurements that must be overcome to ascertain a true change or difference with a less than 5% chance of error. The smallest relative detectable change (SDCrel) is defined as the ratio of the SDC to the mean value of the measured parameter
Fig. 2An example of GLS measurements performed in one of the study patients (2 acquisitions taken during the same examination, analyzed off-line by 2 different readers)
Baseline characteristics of the study population (n = 30)
| Variable | Value |
|---|---|
| Age (years) | 60.6 ± 18.9 |
| Women | 11 (36.7%) |
| Body surface area (m2) | 1.92 ± 0.19 |
| Systolic blood pressure (mmHg) | 125 ± 18 |
| Diastolic blood pressure (mmHg) | 74 ± 11 |
| Heart rate (bmp) | 69 ± 8 |
Values are n (%) or mean ± SD
Echocardiographic data obtained by reading 1 and 2 of acquisition 1 and 2, mean of all patients’ mean values and range of the measurements (n = 30)
| Variable | Acquisition 1 | Acquisition 2 | Mean (SD)a | Range | ||
|---|---|---|---|---|---|---|
| Reader 1 | Reader 2 | Reader 1 | Reader 2 | |||
| Global longitudinal strain (%) | − 11.6 ± 5.2 | − 11.5 ± 5.1 | − 11.7 ± 4.8 | − 11.7 ± 4.9 | − 11.6 ± 5.0 | − 22.6; − 1.2 |
| Circumferential strain (%) | − 10.8 ± 5.7 | − 9.9 ± 4.9 | − 10.1 ± 5.1 | − 9.3 ± 4.9 | − 10.1 ± 5.0 | − 23.1; 0 |
| Ejection fraction (%) | 47.5 ± 16.7 | 46.6 ± 17.0 | 46.3 ± 16.3 | 45.3 ± 16.8 | 46.4 ± 16.4 | 14; 73 |
| End-diastolic volume (ml) | 143.0 ± 62.3 | 138.5 ± 61.7 | 143.1 ± 62.3 | 137.1 ± 64.2 | 140.4 ± 61.9 | 58; 262 |
| End-systolic volume (ml) | 82.1 ± 55.8 | 81.5 ± 57.0 | 83.9 ± 55.8 | 82.8 ± 58.6 | 82.6 ± 56.4 | 17; 212 |
| Mitral annular plane systolic excursion (mm) | 10.4 ± 2.9 | 10.2 ± 2.9 | 10.2 ± 3.0 | 10.2 ± 2.9 | 10.3 ± 2.9 | 5.5; 17.0 |
Values are mean ± SD
aCalculated as mean ± SD of all patients’ mean values
Global reproducibility of LV function measurements (n = 30)
| Variable | Mean intra-subject SD | SDC | SDCrel | ICC | 95% CI |
|---|---|---|---|---|---|
| Global longitudinal strain | 0.85% | 1.7% | 14.7% | 0.985 | 0.978–0.991 |
| Circumferential strain | 1.82% | 3.6% | 35.6% | 0.931 | 0.902–0.959 |
| Ejection fraction | 3.35% | 6.6% | 14.2% | 0.979 | 0.971–0.988 |
| End-diastolic volume | 11.1 ml | 21.8 ml | 15.5% | 0.984 | 0.977–0.990 |
| End-systolic volume | 8.1 ml | 15.9 ml | 19.2% | 0.990 | 0.985–0.994 |
| Mitral annular plane systolic excursion | 0.56 mm | 1.1 mm | 10.7% | 0.980 | 0.971–0.988 |
Mean intra-subject SD mean of the standard deviations of intra-subject measurements, SDC smallest detectable change (= 1.96 × mean intra-subject SD), SDC the relative smallest detectable change (= SDC/mean of patients’ mean absolute values of the measured parameter), ICC intra-class correlation coefficient;
Inter-acquisition (ICCacq) and inter-reader (ICCread) reproducibility of LV function measurements (n = 30)
| Variable | ICCread | 95% CI | ICCacq | 95% CI | ICCread–ICCacq | 95% CI diff | |
|---|---|---|---|---|---|---|---|
| Global longitudinal strain | 0.974 | 0.960–0.988 | 0.968 | 0.950–0.985 | 0.006 | − 0.007 to 0.020 | 0.376 |
| Circumferential strain | 0.908 | 0.839–0.978 | 0.865 | 0.771–0.958 | 0.044 | − 0.053 to 0.141 | 0.381 |
| Ejection fraction | 0.950 | 0.925–0.974 | 0.984 | 0.975–0.993 | − 0.034 | − 0.055 to 0.013 | 0.003 |
| End-diastolic volume | 0.966 | 0.941–0.991 | 0.979 | 0.970–0.989 | − 0.013 | − 0.036 to 0.010 | 0.263 |
| End-systolic volume | 0.976 | 0.961–0.990 | 0.989 | 0.980–0.997 | − 0.013 | − 0.027 to 0.001 | 0.075 |
| Mitral annular plane systolic excursion | 0.968 | 0.944–0.992 | 0.958 | 0.927–0.988 | 0.010 | − 0.004 to 0.025 | 0.180 |
Fig. 3Bland–Altman plots showing the mean intra-subject relative difference (expressed as percent of the mean within the subject) between acquisition 1 and 2 after averaging of reading 1 and 2 for each acquisition (acquisition-effect) and the mean difference between reading 1 and 2 after averaging of acquisition 1 and 2 for each reading (reading-effect) for GLS (a), CS (b), EF (c), EDV (d), ESV (e) and MAPSE (f) versus the mean value of the respective parameter within the patient. Colored lines indicate bias and limits of agreement (1.96 × SD)
Fig. 4Correlation between mean intra-subject standard deviations of LV function parameters and their absolute values, indicating that the calculated smallest detectable changes are independent (homoscedastic) of LV function impairment level when assessed by GLS, CS, EF and MAPSE. Intra-subject standard deviations significantly correlated with absolute values of LV volumes