Functional Characterization of the N-Terminal C2 Domain from Arabidopsis thaliana Phospholipase Dα and Dβ.

Most of plant phospholipases D (PLD) exhibit a C2-lipid binding domain of around 130 amino acid residues at their N-terminal region, involved in their Ca2+-dependent membrane binding. In this study, we expressed and partially purified catalytically active PLDα from Arabidopsis thaliana (AtPLDα) in the yeast Pichia pastoris. The N-terminal amino acid sequence of the recombinant AtPLDα was found to be NVEETIGV and thus to lack the first 35 amino acid belonging to the C2 domain, as found in other recombinant or plant purified PLDs. To investigate the impact of such a cleavage on the functionality of C2 domains, we expressed, in E. coli, purified, and refolded the mature-like form of the C2 domain of the AtPLDα along with its equivalent C2 domain of the AtPLDβ, for the sake of comparison. Using Förster Resonance Energy Transfer and dot-blot assays, both C2 domains were shown to bind phosphatidylglycerol in a Ca2+-independent manner while phosphatidic acid and phosphatidylserine binding were found to be enhanced in the presence of Ca2+. Amino acid sequence alignment and molecular modeling of both C2 domains with known C2 domain structures revealed the presence of a novel Ca2+-binding site within the C2 domain of AtPLDα.

1. Introduction

n class="Gene">Phospholipase D (PLD, EC 3.1.4.4) is a lipolytic enzyme which has gradually emerged, over recent decades, as one of the key components of a broad range of cellular and physiological processes (see [1] for review). PLD hydrolyzes the distal phosphodiester bond of glycerophospholipids, leading to the formation of phosphatidic acid (PA) and to the release of a soluble head group. In addition to the hydrolysis reaction, PLD is able to catalyze a transphosphatidylation reaction in which a primary alcohol is transferred to the phosphatidyl moiety of the substrate phospholipid, leading eventually to the formation of the corresponding phosphatidyl alcohol [2].

Historically, plants have been used as an outstanding model for n class="Gene">PLD research. Indeed, PLD activity has been originally described in carrot [3] and the gene was cloned for the first time from Ricinus communis [4]. These studies have been the premise of PLD research, allowing a subsequent identification and characterization of PLD homologues in a wide range of organisms, from both prokaryotic and eukaryotic origins, including mammals, yeasts, bacteria, and viruses (see [1] for review).

So far, 12 putative n class="Gene">PLD genes have been identified in the plant genetic model Arabidopsis thaliana [5, 6]. All these PLDs have been demonstrated to play central roles in seed germination [7, 8], growth and biomass accumulation [9], stress [10, 11], defense [12], and wound healing [13]. Based on their gene architecture, their sequence similarities, and their biochemical properties, these PLDs can be grouped into two major categories. The C2-PLD category comprises 10 PLD genes that harbor a C2 domain, subdivided into α-, β-, γ-, δ-, and ε-type PLDs. In contrast, the PX/PH-PLD category presents only 2 PLD genes that contain a phox domain (PX) and a pleckstrin homology (PH) domain, similarly to mammalian PLDs.

The α-type n class="Gene">PLD comprises 3 isoforms involved in hyperosmotic stresses [14] and senescence presumably by transducing phytohormone signals [15]. In vitro, α-type PLD from various plant sources has been shown to hydrolyze phosphatidylcholine (PC), phosphatidylethanolamine (PE), and phosphatidylglycerol (PG) in the presence of 20 to 100 mM of Ca2+ and detergents, at physiological pH [16-21]. Nevertheless, using the recombinant Ricinus communis PLDα (RcPLDα), Pappan and Wang [22] also demonstrated that at an acidic pH, α-type PLD has a basal hydrolytic activity towards PC vesicles containing both PE and phosphatidylinositol-4,5-bisphosphate (PIP2), in the absence of Ca2+, and is stimulated by Ca2+ concentrations ranging from 10 μM to 500 μM [22]. The β-type PLD, composed of 2 isoforms, has been demonstrated to be implicated in the regulation of actin polymerization/depolymerization and was proposed to play an important role for tip growth of pollen tubes [23]. The γ-type PLD, composed of 3 isoforms, has been shown to be involved in lipid modulation under aluminum stress [24]. In contrast to the α-type PLD, neither β- nor γ-type PLDs require detergent for their activity and are most active in vitro at micromolar calcium concentrations. Nevertheless, both of these isoforms have been demonstrated to hydrolyze PC, PG, and N-acylphosphatidylethanolamine in the presence of PIP2 and 50 μM of Ca2+, at a physiological pH [16]. Concerning the δ-type PLD, 2 spliced variant isoforms have been identified so far and shown to be involved in defense signaling [12] and freezing tolerance [25]. Similarly to β- and γ-type PLDs, δ-type PLD hydrolyzes PC in the presence of PIP2 and 50 to 100 μM of Ca2+ but is also stimulated by oleate [26]. Unlike the other members of the Arabidopsis PLD superfamily, the PLDε represents the unique member of its class. This PLD, which was originally grouped into the α-type subfamily (PLDα 4), appears to promote plant growth by acting on nitrogen signaling [9]. Interestingly, among all plant PLDs, the PLDε is the most permissive in terms of enzyme activity conditions requirements. Indeed, this PLD can be assayed in the presence of detergents and Ca2+ concentrations in the mM range but also in the presence of oleate, PIP2, and μM concentrations of Ca2+ [9].

The n class="Disease">C2-PLD category presents striking differences in terms of catalytic properties and regulatory processes [5, 6]; all members of this group exhibit a Ca2+-dependent hydrolysis of phospholipids. This feature has been attributed to the presence of the Ca2+-dependent membrane-targeting C2 domain. This domain is an independent folding module of approximately 130 residues long that has been first described as the second conserved domain of the Ca2+-dependent protein kinase C (PKC conserved 2) [27]. Subsequently, an increasing number of C2 domains have been identified in a broad range of membrane-associated proteins, such as Synaptotagmin [28], involved in vesicular trafficking, or the cytosolic phospholipase A2 (cPLA2) [29, 30] as well as the phospholipase C-δ (PLCδ) [31], both involved in lipid signaling and metabolism.

All of the C2 domains described so far present a conserved β-sandwich fold, composed of eight antiparallel β sheets that can be separated into type I and type II topologies, which slightly differ in their β-strand connectivity [32]. Indeed, the first and the second β-strands (β1 and β2) of the type I topology correspond, respectively, to the last and the first β-strands (β8 and β1) of the type II topology [32]. Nevertheless, this secondary structure succession is highly conserved and is connected along with pan class="Chemical">three variable loops, which harbor several acidic residues, identified as n>n class="Chemical">Ca2+ binding regions (CBR). Indeed, the tertiary structure configuration of C2 domains drives to a spatial proximity of CBRs which act as a Ca2+ binding pocket [32, 33]. Therefore, C2 domains are able to specifically bind one to three Ca2+ ions, leading to a conformational change of the whole enzyme and, eventually, to its recruitment at the membrane.

Indeed, n class="Chemical">Ca2+ has been shown to regulate proteins behavior as demonstrated for cPLA2, by slowing down its membrane dissociation constant or, for PKCα, by modulating both its membrane association and dissociation rates. Interestingly, Ca2+ binding studies on full lengths cPLA2 and PKCα, in comparison to their respective C2 domains alone, have shown distinct effect of each bound Ca2+ ion on proteins behavior. Indeed, site directed mutagenesis of Ca2+ coordinating residues, in association with lipid monolayer and surface plasmon resonance studies, has revealed that one Ca2+-bound to the C2 of the cPLA2 leads to an intradomain conformational change, which is critical for its membrane penetration, while the other bound Ca2+ is not directly involved in the membrane binding [34]. In contrast for PKCα, authors have shown that one Ca2+-bound to the C2 induces an interdomain conformational, implying the whole enzyme and, thus, leading to the membrane binding of non-C2 residues. The other bound Ca2+ may be involved in more complex interactions with the membrane, including the binding to phosphatidylserine (PS) [34].

Similarly, C2 domains of plant n class="Gene">PLDs have been demonstrated to exhibit several of the conserved acidic residues within their CBRs [32, 33]. However, despite the fact that the recombinant domains are able to bind Ca2+, striking differences can be observed concerning their binding affinities. Indeed, as reported by Zheng et al. [35], the C2 domain from Arabidopsis thaliana PLDα (AtPLDα) is able to bind 1 to 3 Ca2+ with a low affinity (Kd ranging from 470 to 590 μM) while the C2Δ173–190 domain from Arabidopsis thaliana PLDβ (AtPLDβ) harbors 3 Ca2+ binding sites with different affinities within its CBRs (Kd1 = 0.8 μM, Kd2 = Kd3 = 24 μM) [35]. Thus, it has been hypothesized that this dissimilar affinity for Ca2+ came from the lack of one acidic residue within the CBR1 of the C2 domain of the AtPLDα, due to the substitution of D by Q residue, which could explain the millimolar concentration range of Ca2+ required for optimal activity of AtPLDα in vitro [35]. However, a recent study on the C2 domain from tomato PLDα tends to disclaim these properties, demonstrating the existence of two high-affinity binding sites for Ca2+-binding sites (Kd = 59.73 μM) [36].

Interestingly, while the C2 domain of the Atn class="Gene">PLDα has been extensively investigated, to our knowledge, only one report on the recombinant expression of the whole enzyme has been performed, so far [37]. Although the resulting enzyme was found to be active, it is worth noting that it was expressed in the prokaryotic expression system E. coli, which does not allow several eukaryotic and plants-like posttranslational modifications, such as glycosylation. Therefore, here we report the functional expression of the recombinant AtPLDα in the eukaryotic expression system P. pastoris. The N-terminal amino acid sequence was subsequently determined and was found to lack the first 35 residues belonging to the C2 domain, as found in other recombinant or plant purified PLDs. Thus, to investigate the impact of such a cleavage on the functionality of plant C2 domains, we subsequently expressed the mature-like form of the C2 domain of the AtPLDα along with its equivalent C2 domain of the AtPLDβ, for the sake of comparison. Interestingly, both domains were found to be functional and to be able to bind PG in a Ca2+ independent manner while PA and PS binding were found to be enhanced in the presence of Ca2+ ions.

2. Materials and Methods

2.1. Reagents and Materials

1-n class="Chemical">Palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE), 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-(1′-rac-glycerol) (POPG), 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-L-serine (POPS), and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphate (POPA) were obtained from Avanti Polar Lipids (Alabaster, Alabama, USA). Protino® Ni-TED and NucleoBond® Xtra Midi packed columns were purchased from Macherey-Nagel GmbH & Co. KG (Germany). Choline oxidase (from Arthrobacter globiformis), horseradish peroxidase (type VI), triolein, and monoclonal anti-poly-Histidine coupled to peroxidase antibody were obtained from Sigma-Aldrich-Fluka Chemie (Saint-Quentin-Fallavier, France). Complete protease inhibitors cocktail tablets were purchased from Roche Diagnostic (Mannheim, Germany). Taq polymerase from Thermus aquaticus and Zymolyase 20T were purchased from Euromedex (Souffelweyersheim, France). KOD DNA polymerase from Thermococcus kodakaraensis and pET28b(+) plasmid were obtained from Novagen (MerckKGaA, Darmstadt, Germany). QIAquick PCR Purification Kit was provided by Qiagen (Courtaboeuf, France). BL21-Codon Plus- (DE3-) RIPL strain was obtained from Agilent Technologies (Courtaboeuf, France). One Shot TOP10 strain and pGAPZB were purchased from Fisher Scientific (Illkirch, France). Restriction enzymes were obtained from either Jena Bioscience GmbH (Loebstedter, Germany) or New England Biolabs (Evry, France).

All solutions were prepared using Milli-Q grade pan class="Chemical">water (Millipore, 18.2 MΩ·cm resistivity).

The n class="Species">Arabidopsis thaliana full-length cDNA encoding PLDα1 was a gift from Dr. Wang [35] and the Arabidopsis thaliana full-length cDNA encoding PLDβ1 (pdx82318) was provided by the plant genome project at the RIKEN Genomic Sciences Center (Japan).

2.2. pGAPZB Modification and Cloning of AtPLDα

To bring closer together the GAP promoter and the coding sequence, n class="Chemical">pGAPZB was modified by digestion using EcoRI and KpnI. After purification of the plasmid, cohesive 5′ and 3′ ends were blunted using T4 DNA polymerase, leading to the reconstruction of the EcoRI site along with the destruction of the KpnI site, and further joined using T4 DNA ligase. Finally, the vector was amplified in E. coli TOP10 strain, purified, and verified by sequencing (Eurofins MWG, Ebersberg, Germany). For subsequent cloning, cDNA sequences coding for the wild type AtPLDα (AtPLDα-WT) and the poly-histidine tagged (6xHis-Tag) AtPLDα (AtPLDα-6xHis) were amplified by PCR, using the same forward primer (TCAGTCGACAAAAGAATGGCGCAGCATCTGTTGC), carrying the starting codon and harboring the SalI restriction site. Both reverse primers were designed with the NotI restriction site in the presence of a stop codon for AtPLDα-WT (TGCTGCGGCCGC TTAGGTTGTAAGGATTGGAG) or in the absence for AtPLDα-6xHis (TGCTGCGGCCGCGGTTGTAAGGATTGGAGG). Subsequently, purified PCR products and modified pGAPZB were, respectively, digested with SalI-NotI and XhoI-NotI and SalI and XhoI harboring compatible cohesive ends and then ligated using T4 DNA ligase. Finally, constructs were amplified, purified, and verified by sequencing as described above.

2.3. Pichia pastoris Transformation and Cell Lysis

n class="Species">Pichia pastoris (X-33 strain) transformation was carried out by electroporation using a Bio-Rad Micropulser, as previously described [38], to obtain recombinant clones transformed by the pGAPZB vector alone or by the vector containing either the AtPLDα-WT or the AtPLDα-6xHis. Proper genomic insertion of the vector containing either the AtPLDα-WT or the AtPLDα-6xHis was checked by PCR using primers located on the GAP promotor and on the pld. Alternatively, proper genomic insertion of the pGAPZB vector alone was checked by PCR using primers located on the GAP promotor and the AOX1 terminator. To follow up the proper expression of the AtPLDα-WT or the AtPLDα-6xHis, PLD activities were monitored directly from crude protein extracts. To do so, PCR-positives clones, transformed by the pGAPZB vector alone or by the vector containing either the AtPLDα-WT or the AtPLDα-6xHis, were grown on YPD medium for 4 days at 30°C and harvested by centrifugation at 5,000 ×g. Subsequently, cells were resuspended in a buffer containing 50 mM Tris-HCl, pH 8.0, 150 mM NaCl, and 200 mM sucrose and supplemented with EDTA-free protease inhibitor cocktail tablets (Roche Diagnostics) and 50 μg/mL Zymolyase. After 1 hour of incubation at 30°C, cells were lysed using a Mini-Beadbeater (Biospec), insoluble material from the crude extract was pelleted by centrifugation at 10,000 ×g, and the soluble fraction was tested for PLD activity.

2.4. PLD Assay and Protein Determination

n class="Gene">PLD activity was assayed spectrophotometrically in microtitration plates as previously described [38]. The amount of free choline generated from the PLD-catalyzed hydrolysis of POPC was quantified colorimetrically, after oxidation to betaine by choline oxidase with simultaneous production of hydrogen peroxide, which allows oxidative coupling of 4-aminoantipyrine and sodium 2-hydroxy-3,5-dichlorobenzene sulfonate by peroxidase to give a maximal absorbance at 500 nm. The substrate solution was prepared by dispersing 1 mM of POPC in an equimolar mixture (3.1 mM) of SDS and Triton X-100. The mixed micelle solution was vortexed for 30 s, sonicated for 10 min using a bath-type sonicator (Deltasonic type O11C, Fécamp, France), and vortexed again for 30 s. The assay mixture (150 μL final volume) was composed of 266 μM POPC, 0.85 mM SDS, 0.85 mM Triton X-100, 50 mM Tris-HCl, pH 8.0, 5.1 mM 4-aminoantipyrine, 27 mM sodium 2-hydroxy-3,5-dichlorobenzene sulfonate, 0.5 U choline oxidase, and 0.5 U peroxidase, the protein extract to be tested, and the reaction was initiated by adding 20 mM CaCl2. The PLD-generated choline was continuously quantified by recording the absorbance at 500 nm, based on a standard curve obtained with pure choline. Control assays were performed simultaneously in the absence of PLD. One unit of PLD activity was defined as the amount of enzyme releasing 1 μmol of choline per minute under the experimental conditions specified above. Data are expressed as means ± SD. Statistical significance was determined by Student's unpaired t-test (two-tailed). Samples were considered to be significantly different for P < 0.05 (∗), P < 0.01 (∗∗), and P < 0.001 (∗∗∗). The proteins concentration was routinely determined using Bradford's procedure [39] with Bio-Rad Dye Reagent. Bovine serum albumin was used as the reference protein.

2.5. Purification of Recombinant AtPLDα-WT

For large scale n class="Species">expression of AtPLDα-WT, 50 mL of an overnight P. pastoris transformant cell culture was inoculated in 1 L of YPD medium and grown at 30°C with orbital shaking (250 rpm) for 6 days. Cells were then harvested by centrifugation at 5,000 ×g and resuspended as described above. Cells were then disrupted by probe sonication and insoluble material was removed by centrifugation at 10,000 ×g for 20 min at 4°C. The soluble fraction was subsequently dialyzed overnight against 30 mM Pipes buffer, pH 6.2, and 50 mM CaCl2 and applied onto an octyl-Sepharose CL-4B column (2.5 × 20 cm) equilibrated in the same Pipes buffer. The column was then washed with 10 column volumes of the same buffer followed by a second wash with a buffer containing 10 mM Pipes, pH 6.2, and 30 mM CaCl2. The elution of the proteins bound to the column was finally performed with a buffer composed of 10 mM Pipes, pH 6.2, and 0.1 mM EDTA and all purification fractions were assayed for PLD activity. Active fractions were pooled, concentrated by ultrafiltration, and analyzed by SDS-PAGE.

2.6. N-Terminal Sequence Analysis

For N-terminal sequencing, eluted proteins from n class="Chemical">octyl-Sepharose column were analyzed by SDS-PAGE and subsequently electroblotted onto a PVDF membrane for 1 h at 100 V in 90 mM Tris base, 90 mM Boric acid, 0.1% SDS, and 20% (v/v) ethanol transfer buffer using a Trans-Blot apparatus (Bio-Rad). Protein band corresponding to AtPLDα was excised and submitted for Edman degradation using an automatic sequencer model Procise 494A from Applied Biosystems.

2.7. Cloning and Expression of the 6xHis-Tagged C2α and C2β Domains

cDNA coding sequences of Atpan class="Gene">PLDα and Atn>n class="Gene">PLDβ were amplified by PCR with KOD polymerase using forward primers harboring a NcoI restriction site. An extra methionine was added to the C2α sequence (TGCACC GCAAATGTAGAAGAGACG) while the second codon of C2β was changed to insert the new restriction site, leading to the substitution of F residue by V residue (TGCACC GTTGGAAGATTGCCAGG). Reverse primers for the amplification of the C2α domain (TGCTGCGGCCGCCTCAACATGGAAATATTGAAGC) and the C2β domain (TGCTGCGGCCGCCATAGGAGTATACTGAATCG) were designed by inserting a NotI restriction site in the absence of stop codon. The amplified fragments were subsequently cloned in the Novagen expression vector pET-28b(+) between NcoI and NotI sites, flushed with a 3′ 6xHis-Tag coding sequence. Constructs were then amplified, purified, and checked by performing DNA sequencing, as described above. All transformations were carried out by electroporation in BL21-CodonPlus® (DE3)-RIPL competent cells, carrying the pRIPL vector. Resulting transformants were grown on LB plates at 37°C, in the presence of kanamycin and chloramphenicol. For the recombinant expression of C2 domains, 2 liters of LB broth was inoculated with 25 mL of an overnight culture, supplemented with appropriate antibiotics. Cells were then grown at 37°C until OD600 nm reached ~0.8 and induced overnight by adding 1 mM isopropyl-1-thio-β-galactopyranoside, at 20°C. To evaluate the expression level of both C2 domains, the total proteins extracted from an equivalent of 100 μL of culture at an OD600 nm of 1 was loaded on SDS-PAGE. Cells were finally harvested by centrifugation at 5,000 ×g for 20 min at 4°C and pellets were stored at −20°C, until use.

2.8. Purification of C2 Domains

Cell pellets were resuspended in a buffer containing 50 mM n class="Chemical">NaH2PO4, pH 8, 300 mM NaCl, and 5 mM reduced glutathione (GSH). Cells were then harvested by probe sonication for 3 × 3 minutes on ice and centrifuged at 5,000 ×g for 30 min at 4°C. As C2 domains were expressed in insoluble inclusion bodies, pellets were collected and washed 3 times with phosphate buffer. C2 domains were then solubilized using urea-containing buffer, composed of 50 mM NaH2PO4, pH 8, 300 mM NaCl, 1 mM GSH, and 8 M urea. Supernatants were collected by centrifugation at 5,000 ×g for 20 min at 20°C and immediately applied onto a Ni-TED column for purification, using manufacturer's instructions. Briefly, columns were washed with the same buffer followed by the elution of C2 domains bound to the column with a buffer composed of 50 mM NaH2PO4, pH 8, 300 mM NaCl, 5 mM GSH, 8 M urea, and 250 mM of imidazole. Finally, the eluted fractions were applied onto PD-10 desalting columns, exchanging the elution buffer against a buffer containing 50 mM Tris/HCl, pH 8, 5 mM GSH, and 8 M urea, and C2 domains' purity was evaluated on 15% SDS-PAGE (20 μg of proteins per lane).

2.9. Refolding and Intrinsic Fluorescence Analysis of C2 Domains

Small scale refolding trials were carried out by diluting the denatured C2 domains into the refolding buffer, composed of 50 mM pan class="Chemical">Tris/HCl, pH 8, and 5 mM n>n class="Chemical">GSH, and incubated for 1 hour at 20°C. The final concentration of both domains was set at 1 μM, leading to a final concentration of urea ranging from 50 mM to 75 mM. For the sake of comparison, both domains were also diluted into the denaturing buffer, corresponding to the refolding buffer but supplemented with 8 M urea. The refolding process was followed by examining the intrinsic fluorescence of both domains, in the absence or in the presence of 8 M urea. Fluorescence experiments were carried out on a Hitachi F-4500 spectrofluorometer in a 1.5 mL quartz cuvette at 20°C. Intrinsic fluorescence spectra were recorded by exciting C2 domains at 280 nm and fluorescence emission wavelengths were scanned from 300 to 500 nm, maintaining both excitation and emission slits widths set at 10 nm. Fluorescence spectra were also recorded in the absence of C2 domains for background corrections due to buffer's Raman scattering. Large scale refolding of C2 domains was carried out as described above, followed by three dialysis steps against the refolding buffer, filtered through a 0.22 μm filter, aliquoted, and stored at −20°C.

2.10. Phospholipid Dot-Blot Assay

n class="Chemical">Lipids (20 nmol) dissolved in CHCl3 were spotted onto a PVDF membrane and let to evaporate under fume hood. Similarly, 6xHis-Tagged C2α or C2β were also spotted onto a PVDF membrane as a control of the revelation by anti-6xHis antibodies. The membrane was blocked in Tris-buffered saline (TBS) supplemented with fatty acid-free BSA (TBS/BSA) at room temperature for 1 hour and subsequently incubated with refolded C2α, refolded C2β, or the refolding buffer alone, diluted in TBS/BSA at 4°C overnight, in the presence of either 1 mM of Ca2+ or 1 mM of EDTA. After washing three times with TBS/BSA, the membrane was incubated one hour in the presence of TBS/BSA supplemented with 0.2% of Tween 20. An anti-6xHis mouse monoclonal antibody coupled to peroxidase was subsequently added and incubated at room temperature for 1 hour. Finally, membranes were washed three times with the same buffer and proteins bound to lipids were revealed using a solution composed of 3,3′-diaminobenzidine tetrahydrochloride and 3% H2O2.

2.11. Förster Resonance Energy Transfer

Relative binding of the C2α domain and the C2β domain to n class="Chemical">phospholipids vesicles was carried out by using the protein to dansyl-PE Förster Resonance Energy Transfer (FRET). To do so, phospholipid liposomes were made by the extrusion method, passing seven times the solution through a 100 nm filter membrane, using a mini extruder (Avanti Polar Lipids). Typical liposomes were composed of the desired phospholipid supplemented with 5% of dansyl-PE. Average hydrodynamic diameters of liposomes, in the absence or in the presence of Ca2+, were checked by performing dynamic light scattering experiments in a 1 mL cuvette on a Zetasizer Nano ZS (Malvern Instruments Ltd., United Kingdom). Relative bindings were examined by mixing 20 μM of liposomes with 1 μM of C2 domain or the buffer alone in a 50 mM HEPES buffer, pH 8, as previously described [36]. All fluorescence experiments were recorded at 30°C using a Tecan Infinite M200 (Salzburg, Austria) microplate fluorescence reader at excitation and emission wavelengths set at 280 nm and 510 nm, respectively, with excitation and emission slits widths set at 10 nm and 20 nm, respectively. Relative FRET was calculated as (I − I 0)/I 0, where I and I 0 correspond to the fluorescence intensity of the C2 domain and the buffer alone, at 510 nm. Effect of Ca2+ ions was carried out by adding small proportion of CaCl2 and incubated 10 minutes at 20°C.

2.12. Secondary Structures Predictions and Molecular Modeling

Predictions of secondary structures of C2 domains were carried out with the Psipred server [40]. Molecular modeling of C2 domains was carried out using the I-tasser server [41] and n class="Chemical">Ca2+ ions were manually added, based on structural alignments of C2α and C2β against several C2 domains with known 3D structures, followed by energy minimization using the Chimera software. These C2 domains are identified in the current study with their Protein Data Bank (PDB) entry and correspond to cPLA2 (1RLW), perforin (3W57), Munc13-1 (3KWU), Car4 (5A50 and 4V29), Car4 (5A52), PKCα (1DSY), PKCβ (1A25), rabphilin-3A (2K3H and 2CM5), Synaptotagmin-1 C2A (1BYN), and C2B (1UOV), SV2A (4V11), and Synaptotagmin-7 C2B (3N5A). Membrane interacting residues of these domains were extracted from the OPM database [42] (Orientation of Proteins in Membranes) while C2α and C2β docking to membranes was carried out using the PPM server (Peripheral Proteins in Membranes) [42].

3. Results and Discussion

3.1. Yeast Expression of the Recombinant AtPLDα

Based on the previous report on the recombinant n class="Species">expression of the Vigna unguiculata PLDα (VuPLDα) [38], we cloned the full-length cDNA encoding the AtPLDα into the pGAPZB vector, in the absence (AtPLDα-WT) or in the presence of a carboxyterminal polyhistidine tag (AtPLDα-6xHis), for the constitutive expression in the yeast Pichia pastoris. In contrast to the prokaryotic E. coli expression system, P. pastoris is a eukaryotic organism that appears very effective for the recombinant expression of eukaryotic proteins [43], allowing various posttranslational modifications such as glycosylation.

Thus, n class="Species">P. pastoris (X-33 strain) transformation yielded several colonies harboring a correct genomic recombination, as confirmed by PCR, with the pGAPZB containing the coding sequence of either the AtPLDα-WT or the AtPLDα-6xHis or with the empty vector, serving as the negative expression control. To investigate the functional expression of both recombinant AtPLDs, PCR-positives clones were grown for several days and further assayed for PLD activity. Therefore, as shown in Figure 1(a), crude extracts of P. pastoris transformed with the AtPLDα-WT exhibited a higher PLD activity, in comparison to the negative control. Besides the time course expression of the AtPLDα-WT showed an increasing specific PLD activity as function of culture time and reaching a maximum at 7 days of culture (data not shown). Interestingly, this result contrast with the previously reported VuPLDα expression pattern that showed a rapid increase of PLD activity with a maximum reached after 3 days of culture [38]. Nevertheless, this result indicates a functional expression of the AtPLDα-WT and suggests that P. pastoris is a well-adapted expression system for the recombinant production of plants PLDs.

Figure 1

(a) Recombinant AtPLDα activity in crude protein extracts of Pichia pastoris transformed with the empty vector or expressing either the recombinant AtPLDα-WT or the AtPLDα-6xHis, after 4 days of culture, and using POPC (0.26 mM, final concentration) as the substrate. Values presented are the means ± SD obtained from four independent PCR-positive clones. P < 0.01 (versus blank). (b) SDS-PAGE (10% acrylamide) analysis of the recombinant AtPLDα-WT purified using the purification procedure with octyl-Sepharose CL-4B column (2.5 × 20 cm) (see Materials and Methods). Lane 1: molecular mass marker, lane 2: eluted fraction containing the recombinant AtPLDα-WT. The gel was stained with Coomassie Brilliant Blue R-250 to reveal the proteins. The arrow on the right indicates the position of the AtPLDα-WT.

It is worth noting that, under the same experimental conditions, no n class="Gene">PLD activity could be observed in crude extracts of P. pastoris transformed with the sequence coding for AtPLDα-6xHis (Figure 1(a)), thus suggesting either a misfolding of the protein due to the 6xHis-tag or a wrong genomic insertion of the cDNA. Interestingly, these results are in line with the previous report of Schäffner et al. [44] who showed that, using the recombinant BoPLDα1 and BoPLDα2, the addition of an amino- or carboxyterminal tag yielded inactive enzymes.

3.2. Partial Purification and N-Terminal Amino Acid Sequencing of Recombinant AtPLDα

To further characterize the recombinant Atn class="Gene">PLDα-WT, we used the property of plant PLDs to strongly bind hydrophobic supports such as octyl-Sepharose in the presence of calcium as previously reported [38, 44–50]. The PLD activity was eluted by chelating the Ca2+ ions with EDTA. Partially purified recombinant AtPLDα-WT was obtained, as attested by a major protein band observed in the SDS-PAGE analysis (Figure 1(b), arrow), corresponding to a molecular mass, as expected, of around 90 kDa. However, despite a harshly wash of the octyl-Sepharose column during the purification process, an important proportion of contaminant proteins were found in the obtained AtPLDα-WT containing elution fractions. Concerning the analysis of the AtPLDα-WT (Figure 1(b), arrow), the protein band was subject to Edman degradation and the obtained N-terminal sequence was found to be NVEETIGV. This N-terminal sequence analysis is a clear evidence for the identification of the AtPLDα-WT, since BLAST analysis against Pichia's genome did not return results, while this sequence perfectly matches with the AtPLDα-WT. As shown in Figure 2, this amino acid sequence corresponds to positions 36 to 43 of the AtPLDα-WT and was found to be very similar to the previously obtained N-terminal sequence of the recombinant VuPLDα expressed in P. pastoris [38].

Figure 2

Protein sequence alignment of the N-terminal region of purified α-type PLDs reported so far. Grey-colored residues represent predicted sequences deduced from cDNAs and absents in mature PLD forms (black-colored residues). Residues highlighted in yellow come from the Edman degradation sequencing obtained in this study while the posttranslational acetylated residue is highlighted in green.

Taking into account the observed N-terminal cleavage and starting from residue 36, the resulting Atpan class="Gene">PLDα-WT is expected to have a molecular mass of 88.1 kDa (775 amino acid residues), thus contrasting with the observed molecular mass on n>n class="Chemical">SDS-PAGE (see Figure 1(b)). Nonetheless, the AtPLDα-WT contains one potential N-glycosylation site that may explain the observed difference in the molecular mass. Indeed, since the addition of single N-linked glycans adds ~2.5 kDa [51], the AtPLDα-WT is expected to reach an apparent molecular mass of around 90.6 kDa, corresponding thus to the one estimated from SDS-PAGE analysis (see Figure 1(b)).

The in vivo glycosylation of α-type n class="Gene">PLDs has been demonstrated for the Glycine max PLDα (GmPLDα) [48] that reacts with lectins but also with antibodies directed against complex Asn-linked glycans [48]. Besides, a similar glycosylation pattern was found for the Helianthus annuus PLDα (HaPLDα) and the Brassica oleracea PLDα (BoPLDα) (Abousalham et al., unpublished data), purified as previously described [45, 47]. The glycosylation character of these enzymes was established by performing Western blotting, either by reacting HaPLDα and BoPLDα with specific lectins, such as concanavalin A, wheat germ agglutinin, or Lens culinaris agglutinin, or using anti-glycan polyclonal antibodies. The later strategy used fractionated horseradish peroxidase antibodies, purified on an affinity column of honeybee venom phospholipase A2, to produce serum fractions that are specific for the α(1,3)-fucose epitopes [52]. In plants, the α(1,3) linked fucose is commonly found in complex Asn-linked glycans and paucimannosidic Asn-linked glycans [53] and is added in the Golgi apparatus.

Besides, n class="Species">P. pastoris is able to recognize the consensus sequence Asn-X-Ser/Thr (where X is any amino acid except proline), which constitute the N-glycosylation sites in yeast but also in mammals and in plants [53], explaining why the recombinant VuPLDα, expressed either in P. pastoris [38] or in insect cells [45], was also found to be glycosylated.

Interestingly, a significant number of studies have reported this kind of cleavage on α-type pan class="Gene">PLDs purified from plant tissues. Indeed, this phenomenon has been first reported by Wang et al. [4, 54] for the Rcn>n class="Gene">PLDα and subsequently described for the PLDα from Oryza sativa (OsPLDα) [55], GmPLDα [48], and HaPLDα [45] as well as for both BoPLDα1 and BoPLDα2 [47, 49, 56]. However, in a more recent study, Schöps et al. [46] have reported an N-terminal acetylation of the second residue of the BoPLDα2, which may explain why attempts to sequence the N-terminal part of the PLDα from Brassica napus (BnPLDα) [57] and Arachis hypogaea (AhPLDα) [58] did not gave results. Oppositely, the recombinant expression in E. coli of both BoPLDα1 and BoPLDα2 was found to lead to the production of full-length enzymes [44]. Therefore, authors suggested that the observed cleavage may come from a proteolytic degradation during the purification process. Nevertheless, using the insect cells expression system, El Maarouf et al. [45] also reported the purification of two forms of the recombinant VuPLDα with distinct N-terminal cleavage sites (VuPLDαa and VuPLDαb). Interestingly, both forms were found to be secreted in the culture medium without the addition of a secretion peptide, leading authors to hypothesize that the N-terminal part of α-type PLDs may act as a leader peptide.

Although the mechanism of such a cleavage or degradation needs further insights, this phenomenon may come from the action of some proteases towards the C2 domain of the pan class="Gene">PLDα. Indeed, in a previous study, Simões et al. [59] reported the interaction between the n>n class="Gene">PLDα from Cynara cardunculus and cardosin A, an aspartic proteinase which accumulates in protein storage vacuoles [59]. This specific interaction was found to occur within the C2 domain via both a RGD motif and a KGE motif, present in the cardosin A, and resulted in the proteolysis of the GST N-terminal tagged recombinant C2 domain of the C. cardunculus PLDα upon dissociation of the complex [59]. Interestingly, P. pastoris presents several vacuolar proteases that harbor this RGD or KGE motif which is, in a surprising manner, also found in the CBR1 of the AtPLDα C2 domain.

3.3. Expression, Purification, and Refolding of N-Terminal C2 Domains from AtPLDα and AtPLDβ

Because the exact nature of the removed N-terminal part of α-type n class="Gene">PLDs remains elusive, we wondered about the impact of such cleavage on the functionality of the C2 domains. To investigate further this concern, we subsequently expressed the mature-like form of the C2 domains from AtPLDα (C2α) along with its equivalent C2 domain from AtPLDβ (C2β), based on protein sequence alignments, for the sake of comparison. Expression of C2α and C2β in BL21 cells resulted in a rapid accumulation of proteins in inclusion bodies as shown by SDS-PAGE analysis of E. coli crude protein extracts expressing either the C2α (Figure 3(a), lane 3) or the C2β (Figure 3(a), lane 4). Therefore, C2α and C2β were solubilized under denaturing conditions using urea and subsequently purified by affinity chromatography using Ni2+ affinity resins. SDS-PAGE analysis of purified C2α and C2β devoid of any detectable contaminants gave a single protein band at a position corresponding to a molecular mass of 14.8 (Figure 3(b), lane 2) and 14.2 kDa (Figure 3(b), lane 3), respectively. Pure C2 domains were subsequently refolded by rapid dilution at low protein concentration in a urea-free buffer and extensively dialyzed to remove urea. However, subsequent concentration attempts by ultra-filtration led to an important protein precipitation, yielding a poor recovery of both C2 domains. The addition of chemical reagents such as arginine or N-lauroylsarcosine were found to drastically enhance the protein solubility; however, both C2 domains were prone to aggregate during subsequent dialysis.

Figure 3

(a) SDS-PAGE analysis of crude protein extracts from E. coli cells expressing either the C2α domain or the C2β domain, in comparison to the empty vector as expression control. Lane 1: molecular mass marker, lane 2: empty vector, lane 3: C2α domain, and lane 4: C2β domain. (b) SDS-PAGE analysis of affinity purified C2α domain and C2β domain. Lane 1: molecular mass marker, lane 2: C2α domain, and lane 3: C2β domain. Protein migrations were performed using 15% SDS-PAGE and stained with Coomassie Brilliant Blue R-250.

In these experimental conditions, the maximal concentration that could be obtained was found to be 5 μM (7 μg·mL−1) for the C2α and 9 μM (13 μg·mL−1) for the C2β. Despite the low protein concentration obtained, the refolding process of these domains could be followed using their intrinsic fluorescence. Protein unfolding usually leads to the exposure of fluorescent residues (n class="Chemical">Trp/Tyr), resulting in a modification of the fluorescence signal and a shift of the emission peak. Interestingly, in the presence of 8 M urea, the two denatured C2 domains present a striking difference of their fluorescence emission maxima, corresponding to λ max of 349 nm for the C2α (Figure 4(a), red curve) and λ max of 345 nm for the C2β (Figure 4(b), red curve). Upon reduction of urea concentration, both domains present a blue shift of their fluorescence emission maxima, along with a change in their fluorescence intensity. As shown in Figure 4, the C2α presents a fluorescence emission maximum at λ max of 340 nm with a concomitant intensity decrease (Figure 4(a), blue curve) while the C2β presents an emission maximum at λ max of 335 nm along with an increase of its fluorescence intensity (Figure 4(b), blue curve). Thus, both domains showed a decreasing emission maximum wavelength of approximately 10 nm upon denaturant removal, which is usually associated with a burial of tyrosine and tryptophan residues in a more hydrophobic environment, indicating a proper refolding.

Figure 4

Intrinsic fluorescence spectra (λ ex 280 nm) of urea-denatured C2α domain (a) and C2β domain (b) diluted in a Tris/HCl buffer containing (red curves) or not (blue curves) 8 M urea and after 1 h of incubation at room temperature. The final concentration of both domains was set at 1 μM, leading to a final concentration of urea ranging from 50 mM to 75 mM for blue curves. Fluorescence intensity was expressed in arbitrary units (AU) and bandwidths were set at 10 nm for both excitation and emission.

3.4. C2 Domains-Phospholipids Binding Assay

To investigate further the impact of the loss of the N-terminal part on the C2 domains properties, the n class="Chemical">Ca2+-dependent or -independent binding of both C2α and C2β towards phospholipids was examined using the phospholipid dot-blot technique, as indicated in Materials and Methods. As shown in Figure 5(a), both C2 domains clearly bound to anionic phospholipids (PS and PA) in the presence of 1 mM of Ca2+. Conversely, the C2α bound PG with high affinity in the absence of Ca2+ and the affinity decreased upon the addition of Ca2+.

Figure 5

(a) Lipid blot analysis of the interaction of the C2α (left panel) and the C2β (middle panel) in the presence of 1 mM of Ca2+ or 1 mM of EDTA, in comparison to the dialysis buffer serving as the negative control (right panel). Lipids were spotted onto a PVDF membrane and interactions were revealed using an anti-6xHis antibody, as described in the experimental procedures. TG: triglyceride, +: positive control made by spotting 6xHis-C2 domain protein. (b) Relative binding of the C2α (left panel) and the C2β (right panel) to phospholipids vesicles, using the protein to dansyl-PE FRET. Blue bars: no Ca2+ added, red bars: 50 μM of Ca2+, and green bars: 200 μM of Ca2+. Values presented are the means ± SD obtained from three independent experiments.

These results were further confirmed by FRET experiments, using n class="Chemical">dansyl-PE labeled liposomes (Figure 5(b)). In these experiments, tryptophan of the C2 domains serves as the donor of fluorescence that is transferred to the dansyl acceptor upon binding to phospholipid vesicles. As shown in Figure 5(b) and as expected, both C2 domains were found to bind anionic phospholipids (PA and PS) in the presence of Ca2+, while no affinity could be observed for neutrally charged phospholipids, PC and PE, in either the presence or the absence of Ca2+. Interestingly, in the absence of Ca2+, both C2 domains showed a strong binding to PG vesicles that was not influenced by the addition of Ca2+. Similarly, a slight binding to PS vesicles and a much more pronounced binding to PA vesicles could be observed for both C2 domains, in the absence of Ca2+ (Figure 5). It is worth noticing that, in contrast to PG vesicles, the addition of Ca2+ was found to enhance binding of both C2 domains to PA and PS (Figure 5). Nevertheless, in comparison to the C2α, the C2β appeared to require a much less important Ca2+ concentration for an efficient binding to PS vesicles.

In contrast to the n class="Chemical">Ca2+-independent phospholipids binding of the C2 domain of tomato PLDα [36], these results are in line with the previous report by Zheng et al. [35], who demonstrated that both the recombinant full-length C2α of AtPLDα and C2β Δ173–190 of AtPLDβ were able to bind PS containing vesicles in a Ca2+-dependent fashion, in vitro [35]. Similar to the present study, C2β Δ173–190 was found to require much less Ca2+ to bind PS vesicles than the C2α. This Ca2+-dependent binding to PS was thus proposed to be involved in the recruitment of PLDs to the membrane, as demonstrated for the C2 domain of the PKCα [60]. Interestingly, the binding to PA and PG vesicles of the C2α and the C2β presented in this study is also in line with the previous report on the activation of the BoPLDα by PA and PG [61] as well as of the HaPLDα by PG [20]. This behavior was also demonstrated by Majd et al. [62], who proposed a novel interfacial kinetic model for PLDs, taking into account the activating role of the newly PLD-generated PA. In this model, the PLD activity towards the PC substrate starts with a slow activity phase, which gradually accelerates upon PA accumulation. Interestingly, it is well known that both SDS and Triton X-100 are found to be critical for an optimal PLD activity, in vitro [63]. Also, the addition of these detergents to phospholipids leads to an optimal substrate accessibility through the formation of mixed micelles; we can hypothesize that the negative charge of SDS may mimic PA, thus leading to the activation of α-type PLDs.

3.5. Secondary Structure Prediction and Molecular Modeling of C2α and C2β

C2α and C2β are expected to present the 8 conserved β strands, as demonstrated by their secondary structure predictions (Figure 6(a)). However, all C2 domains from plant pan class="Gene">PLDs present, in addition, an extra region between the two predicted β1 and β2 strands. This singular characteristic relies on an insertion of 15 to 20 amino acid residues that has been previously [35] proposed to fold as an α-helix and that agrees with the proposed prediction (Figure 6(a)). Interestingly, the observed cleavage on the recombinant Atpan class="Gene">PLDα appears to occur at the end of the predicted helix, indicated by an arrow in Figure 6(a).

Figure 6

(a) Multiple sequence alignment of C2 domains. Amino acid sequences of C2α and C2β were aligned with various known C2 domain structures (see Materials and Methods). Residues highlighted in red represent Ca2+ binding residues extracted from structures and residues highlighted in green represent membrane binding residues extracted from the OPM database. The proposed α-helix between β1 and β2 strands is indicated in blue. CBR: Ca2+ binding region. Strand β0, colored in yellow, corresponds to the first β strand present in typology I. The observed cleavage on the recombinant AtPLDα is indicated by the arrow (red). The PDB entries correspond to cPLA2 (1RLW), perforin (3W57), Munc13-1 (3KWU), Car4 (5A50 and 4V29), Car4 (5A52), PKCα (1DSY), PKCβ (1A25), rabphilin-3A (2K3H and 2CM5), Synaptotagmin-1 C2A (1BYN), and C2B (1UOV), SV2A (4V11), and Synaptotagmin-7 C2B (3N5A). Modeled structures of the C2α domain (b) and the C2β domain (c), using the I-tasser server and docked to membrane (dummy) using the PPM server. Ca2+ is colored in pink.

Therefore, to investigate further the property of the predicted α-helix, n class="Chemical">three-dimensional (3D) structures of both the C2α and the C2β were modeled, based on their secondary structure prediction. As expected, both C2 domains present a β-sandwich fold (Figures 6(b) and 6(c)), composed of 8 antiparallel β sheets along with the predicted helix. Interestingly, this helix was found to adopt an amphipathic pattern, exhibiting its hydrophobic side outwards from the surface, in a similar manner to the one occurring in the C2 domain of the cPLA2 [64], which may explain the observed Ca2+-independent membrane binding of the full-length C2 domain from tomato PLDα [36]. Besides, in the structure of the C2 domain of the cPLA2, the hydrophobic part of the helix appears to interact with the membrane, surrounding the Ca2+-binding pocket, and is directly followed by the first Ca2+-binding D residue [64]. Interestingly, structural alignments between the two modeled domains and various known C2 domain structures showed a similar structure, allowing us to append Ca2+ to CBRs and to predict Ca2+-binding residues. Thus, as shown in Figure 6, C2α and C2β were found to exhibit the conserved D residues of the CBR3 (D97 and D98 for the C2α and D109 and D111 for the C2β) but, in contrast, presented striking difference in their CBR1. Indeed, while the C2β harbors the conserved D residues within its CBR1 (D34 and D62, Figures 6(a) and 6(c)), the C2α shows a D to Q substitution (Q49, Figures 6(a) and 6(b)), as previously described [35]. Nevertheless, a novel Ca2+-binding (E38) site within the sequence motif “NVEE” could be identified just after the first helix of the C2α (Figure 6(a)), similar to the first Ca2+-binding D residue of the C2 domain of the cPLA2 [64], suggesting that the C2α may present a functional CBR1. Interestingly, this Ca2+-binding motif is highly conserved among the α-type PLDs (see Figure 2) and remains present in the mC2α as well as in the matured form of the AtPLDα-WT, thus explaining the requirement of a complete chelating of Ca2+ during the elution step of the purification process. Besides, this finding is in line with the previous report on the VuPLDα produced in insect cells, which showed distinct N-terminal cleavage sites along with different binding properties towards hydrophobic supports in the presence of Ca2+. Indeed, the 3-day postinfection purified form, VuPLDαa, exhibited an N-terminal sequence similar to the VuPLDα expressed and purified in P. pastoris and required the total chelating of Ca2+ to be eluted from the octyl-Sepharose column [45]. In contrast, the 4-day postinfection purified form, VuPLDαb, showed an extra cleavage site of 8 more residues, including the newly predicted Ca2+-binding residue, and could be eluted in the presence of only 30 mM of Ca2+, suggesting that the CBR1 of the C2 domain was affected [45]. Interestingly, the presence of this Ca2+-binding site in the mC2α can also explain the observed Ca2+-dependent binding to PA and PS, similar to the C2 domain of the PKCα [60]. In contrast, the Ca2+-independent binding of mC2α and mC2β to PG suggests the presence of an additional lipid binding site within the C2 domain. This second binding site can correspond to the polybasic motif, previously identified as a Ca2+-independent PIP2 binding motif [35]. Indeed, as demonstrated on the 3D structure of the C2 domain of the PKCα [65], this motif was shown to present several basic residues, within the β3 strand (Figure 6(a), 1DSY), which taken together form a highly positively charged patch, thus enabling the binding of anionic phospholipids. Interestingly, this second site may also explain the slight Ca2+-independent binding to PS and PA of both domains observed in the current study and as previously reported for PS vesicles [35]. Nevertheless, while the C2α exhibits several basic residues within its β3 strand (Figure 6(a)), the C2β harbors only one R residue, R76, (Figure 6(a)). Therefore, this slight Ca2+-independent binding to anionic phospholipids may also be explained by the presence of the K residue (K96 and K108, resp., for the C2α and the C2β), juxtaposed to the conserved D of the CBR3 of the two domains (Figure 6(a)), as demonstrated by Ananthanarayanan et al. [66], for the PLC-δ4. Indeed, this isoform harbors two cationic residues, present within its CBR3, which have been shown to be involved in nonspecific electrostatic interactions with anionic phospholipids [66].

Therefore, both C2 domains (mC2α and mC2β) may target the membrane n class="Chemical">through two different binding sites with variable affinities as function of the Ca2+ availability and of the lipid composition of membranes. In addition, these two domains may be anchored in the membrane via hydrophobic residues present near the CBR3, as found using the PPM prediction server (Figure 6(a)), even when the amphipathic helix of the CBR1 is removed. Indeed, hydrophobic residues of the CBR3 appear highly conserved in an important number of C2 domains (Figure 6(a)) and are thought to be critical for an efficient membrane binding.

4. Conclusion

We report here the functional n class="Species">expression of the recombinant AtPLDα in the eukaryotic system P. pastoris. Interestingly, while the addition of a C-terminal 6xHis-tag did not give any detectable enzyme, the wild type AtPLDα was found to be expressed as an active form, confirming the efficiency of P. pastoris for the heterologous production of plant PLDs. In addition, the N-terminal amino acid sequencing of the recombinant AtPLDα demonstrated an N-terminal cleavage, at the beginning of the C2 domain, which appears highly similar to the previously purified α-type PLDs.

The mature-like form of the C2 domains C2α and C2β were expressed in n class="Species">E. coli, purified, and refolded. Both C2 domains were found to be functional and to be able to bind PG in a Ca2+-independent manner while PA and PS bindings were found to be enhanced in the presence of Ca2+. Such bindings were found to be in line with the previously activating roles of these phospholipids towards α-type PLDs and indicated, in addition, that the matured-like C2 domain of the AtPLDα presents all of the conserved Ca2+ binding residues. Indeed, molecular modeling of the C2α domain 3D structure predicted the presence of a novel Ca2+ binding site which may replace the D to Q substitution, within the CBR1. Interestingly, this binding site was found to be highly conserved among α-type PLDs and can explain the different binding affinities of the two forms of VuPLD, expressed in insect cells, towards hydrophobic supports in the presence of Ca2+.

Taken together, these results suggest that α-type n class="Gene">PLDs present complete C2 domains that harbor all of the conserved acidic Ca2+-binding residues within their CBR1 and CBR3. Besides, our data indicate that these C2 domains are able to bind anionic phospholipids, which is in line with the previous reports on the activation effect of these lipids on the α-type PLDs. It can thus be hypothesized that α-type PLDs are regulated by their C2 domains through both Ca2+ dependent and Ca2+-independent binding to anionic lipids.