Revision Total Hip Arthroplasty Using the Cement-in-Cement Technique.

The cement-in-cement technique is useful in the setting of revision total hip arthroplasty (THA), especially to gain acetabular exposure, change a damaged or loose femoral component, or change the version, offset, or length of a fixed femoral component. The goal of this retrospective study was to assess the clinical and radiographic characteristics of revision THA using the cement-in- cement technique. Between 1971 and 2013, a total of 63 revision THAs used an Omnifit (Osteonics, Mahwah, New Jersey) or Exeter (Howmedica, Mahwah, New Jersey) stem and the cement-in-cement technique at the senior author's institution. Aseptic loosening (74%) was the predominant preoperative diagnosis followed by periprosthetic fracture (14%), instability (8%), and implant fracture (6%). Mean clinical follow-up was 5.5±3.8 years. The Harris Hip Score had a statistically significant increase of 18.5 points (P<.001) after revision THA using the cement-in-cement technique. There were 13 returns to the operating room, resulting in an overall failure rate of 21%. Eleven (18%) cases required revision THA, but only 1 (2%) revision THA was for aseptic removal of the femoral component. All other femoral implants had no evidence of component migration, cement mantel fracture, or circumferential lucent lines at final follow-up. The patients who underwent cement-in-cement revision THA at the senior author's institution had good restoration of function but a high complication rate. [Orthopedics. 2017; 40(2):e348-e351.]. Copyright 2016, SLACK Incorporated.