Literature DB >> 27966180

[Endoprostheses in the elderly : Biomaterials, implant selection and fixation technique].

M M Morlock1, M Jäger2.   

Abstract

The replacement of hip and knee joints is one of the greatest success stories in orthopedics. Due to continuous improvement of biomaterials and implant design, patient-associated problems are now mostly multifactorial and only rarely caused by the implant. Abrasion was significantly reduced by the introduction of highly cross-linked polyethylene (PE), antioxidant stabilized PE, new ceramics and the development of ceramic and protective surfaces. It is assumed that further reduction of frictional resistance will not lead to a significantly better clinical result: however, the problem of periprosthetic infections and implant-related incompatibility is still unsolved and remains challenging for biomaterial research. For the knee joint PE will be irreplaceable for joint articulation even in the future due to the contact situation. Mobile bearings and fixed bearings are two established successful philosophies, which have shown comparably good clinical results. For the hip joint, it is forecasted that ceramic-on-ceramic will be the system of the future if the correct positioning and mounting of the components can be solved so that the problems, such as development of noise and breakage can be reduced to a minimum. An in-depth understanding and detailed knowledge of the biomaterials by the surgeon can prevent implant-related problems. For elderly patients it is assumed that the economic burden on the public healthcare system will have the strongest impact on implant selection.

Entities:  

Keywords:  Abrasion; Friction; Hip joint; Knee joint; Total joint replacement

Mesh:

Substances:

Year:  2017        PMID: 27966180     DOI: 10.1007/s00132-016-3361-7

Source DB:  PubMed          Journal:  Orthopade        ISSN: 0085-4530            Impact factor:   1.087


  50 in total

1.  [Bone cement adhesion on ceramic surfaces - surface activation of retention surfaces of knee prostheses by atmospheric plasma versus thermal surface treatment].

Authors:  B Marx; R Marx; U Reisgen; D Wirtz
Journal:  Z Orthop Unfall       Date:  2015-04-14       Impact factor: 0.923

2.  Dose effects of cross-linking polyethylene for total knee arthroplasty on wear performance and mechanical properties.

Authors:  Taiyo Asano; Masao Akagi; Ian C Clarke; Shingo Masuda; Tsunehiro Ishii; Takashi Nakamura
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2007-11       Impact factor: 3.368

3.  In vivo wear of three types of metal on metal hip prostheses during two decades of use.

Authors:  H McKellop; S H Park; R Chiesa; P Doorn; B Lu; P Normand; P Grigoris; H Amstutz
Journal:  Clin Orthop Relat Res       Date:  1996-08       Impact factor: 4.176

4.  Modern trunnions are more flexible: a mechanical analysis of THA taper designs.

Authors:  David A Porter; Robert M Urban; Joshua J Jacobs; Jeremy L Gilbert; José A Rodriguez; H John Cooper
Journal:  Clin Orthop Relat Res       Date:  2014-09-30       Impact factor: 4.176

5.  Formation of a fulminant soft-tissue pseudotumor after uncemented hip arthroplasty. A case report.

Authors:  O Svensson; E B Mathiesen; F P Reinholt; G Blomgren
Journal:  J Bone Joint Surg Am       Date:  1988-09       Impact factor: 5.284

Review 6.  History and systematic review of wear and osteolysis outcomes for first-generation highly crosslinked polyethylene.

Authors:  Steven M Kurtz; Heather A Gawel; Jasmine D Patel
Journal:  Clin Orthop Relat Res       Date:  2011-08       Impact factor: 4.176

7.  Effect of age on mechanical properties of the collagen phase in different orientations of human cortical bone.

Authors:  Huijie Leng; Michael J Reyes; Xuanliang N Dong; Xiaodu Wang
Journal:  Bone       Date:  2013-04-16       Impact factor: 4.398

8.  The incidence of noise generation arising from the large-diameter Delta Motion ceramic total hip bearing.

Authors:  S M McDonnell; G Boyce; J Baré; D Young; A J Shimmin
Journal:  Bone Joint J       Date:  2013-02       Impact factor: 5.082

Review 9.  The Use of Carbon-Fiber-Reinforced (CFR) PEEK Material in Orthopedic Implants: A Systematic Review.

Authors:  Chuan Silvia Li; Christopher Vannabouathong; Sheila Sprague; Mohit Bhandari
Journal:  Clin Med Insights Arthritis Musculoskelet Disord       Date:  2015-02-23

10.  Cemented versus uncemented hemiarthroplasty for femoral neck fractures in elderly patients: a meta-analysis.

Authors:  Tao Li; Qianyu Zhuang; Xisheng Weng; Lei Zhou; Yanyan Bian
Journal:  PLoS One       Date:  2013-07-23       Impact factor: 3.240

View more
  2 in total

Review 1.  [Total hip arthroplasty in young patients : Bearings and custom-made prostheses].

Authors:  C Benignus; M Morlock; J Beckmann
Journal:  Orthopade       Date:  2019-04       Impact factor: 1.087

Review 2.  [Characteristics of elective hip replacement in the elderly].

Authors:  T Claßen; C Scheid; S Landgraeber; M Jäger
Journal:  Orthopade       Date:  2017-01       Impact factor: 1.087

  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.