Literature DB >> 27411972

Development of a biomimetic microfluidic oxygen transfer device.

A A Gimbel1, E Flores1, A Koo2, G García-Cardeña2, J T Borenstein1.   

Abstract

Blood oxygenators provide crucial life support for patients suffering from respiratory failure, but their use is severely limited by the complex nature of the blood circuit and by complications including bleeding and clotting. We have fabricated and tested a multilayer microfluidic blood oxygenation prototype designed to have a lower blood prime volume and improved blood circulation relative to current hollow fiber cartridge oxygenators. Here we address processes for scaling the device toward clinically relevant oxygen transfer rates while maintaining a low prime volume of blood in the device, which is required for clinical applications in cardiopulmonary support and ultimately for chronic use. Approaches for scaling the device toward clinically relevant gas transfer rates, both by expanding the active surface area of the network of blood microchannels in a planar layer and by increasing the number of microfluidic layers stacked together in a three-dimensional device are addressed. In addition to reducing prime volume and enhancing gas transfer efficiency, the geometric properties of the microchannel networks are designed to increase device safety by providing a biomimetic and physiologically realistic flow path for the blood. Safety and hemocompatibility are also influenced by blood-surface interactions within the device. In order to further enhance device safety and hemocompatibility, we have demonstrated successful coating of the blood flow pathways with human endothelial cells, in order to confer the ability of the endothelium to inhibit coagulation and thrombus formation. Blood testing results provide confirmation of fibrin clot formation in non-endothelialized devices, while negligible clot formation was documented in cell-coated devices. Gas transfer testing demonstrates that the endothelial lining does not reduce the transfer efficiency relative to acellular devices. This process of scaling the microfluidic architecture and utilizing autologous cells to line the channels and mitigate coagulation represents a promising avenue for therapy for patients suffering from a range of acute and chronic lung diseases.

Entities:  

Mesh:

Substances:

Year:  2016        PMID: 27411972      PMCID: PMC4987252          DOI: 10.1039/c6lc00641h

Source DB:  PubMed          Journal:  Lab Chip        ISSN: 1473-0189            Impact factor:   6.799


  29 in total

1.  Mass transfer characteristics of artificial lungs.

Authors:  P W Dierickx; D S De Wachter; F De Somer; G Van Nooten; P R Verdonck
Journal:  ASAIO J       Date:  2001 Nov-Dec       Impact factor: 2.872

2.  The Registry of the International Society for Heart and Lung Transplantation: Twenty-eighth Adult Lung and Heart-Lung Transplant Report--2011.

Authors:  Jason D Christie; Leah B Edwards; Anna Y Kucheryavaya; Christian Benden; Fabienne Dobbels; Richard Kirk; Axel O Rahmel; Josef Stehlik; Marshall I Hertz
Journal:  J Heart Lung Transplant       Date:  2011-10       Impact factor: 10.247

3.  Microchannel technologies for artificial lungs: (3) open rectangular channels.

Authors:  J-K Lee; M C Kung; H H Kung; L F Mockros
Journal:  ASAIO J       Date:  2008 Jul-Aug       Impact factor: 2.872

4.  Branched vascular network architecture: a new approach to lung assist device technology.

Authors:  David M Hoganson; Jennifer L Anderson; Eli F Weinberg; Eric Swart; Eric J Swart; Brian K Orrick; Jeffrey T Borenstein; Joseph P Vacanti
Journal:  J Thorac Cardiovasc Surg       Date:  2010-06-29       Impact factor: 5.209

5.  Reply to the 'Comment on "The promise of microfluidic artificial lungs"' by G. Wagner, A. Kaesler, U. Steinseifer, T. Schmitz-Rode and J. Arens, Lab Chip, 2016, 16.

Authors:  Joseph A Potkay
Journal:  Lab Chip       Date:  2016-04-07       Impact factor: 6.799

6.  Comment on "The promise of microfluidic artificial lungs" by J. A. Potkay, Lab Chip, 2014, 14, 4122-4138.

Authors:  Georg Wagner; Andreas Kaesler; Ulrich Steinseifer; Thomas Schmitz-Rode; Jutta Arens
Journal:  Lab Chip       Date:  2016-04-07       Impact factor: 6.799

7.  An integrated array of microfluidic oxygenators as a neonatal lung assist device: in vitro characterization and in vivo demonstration.

Authors:  Niels Rochow; Asmaa Manan; Wen-I Wu; Gerhard Fusch; Shelley Monkman; Jennifer Leung; Emily Chan; Dipen Nagpal; Dragos Predescu; John Brash; Ponnambalam Ravi Selvaganapathy; Christoph Fusch
Journal:  Artif Organs       Date:  2014-04-10       Impact factor: 3.094

Review 8.  Ventilator-induced lung injury: lessons from experimental studies.

Authors:  D Dreyfuss; G Saumon
Journal:  Am J Respir Crit Care Med       Date:  1998-01       Impact factor: 30.528

9.  Polybetaine modification of PDMS microfluidic devices to resist thrombus formation in whole blood.

Authors:  Zheng Zhang; Jeffrey Borenstein; Linda Guiney; Raanan Miller; Sivaprasad Sukavaneshvar; Christopher Loose
Journal:  Lab Chip       Date:  2013-04-05       Impact factor: 6.799

10.  OPTN/SRTR 2012 Annual Data Report: lung.

Authors:  M Valapour; M A Skeans; B M Heubner; J M Smith; M A Schnitzler; M I Hertz; L B Edwards; J J Snyder; A K Israni; B L Kasiske
Journal:  Am J Transplant       Date:  2014-01       Impact factor: 8.086

View more
  3 in total

1.  An ultra-thin, all PDMS-based microfluidic lung assist device with high oxygenation capacity.

Authors:  Mohammadhossein Dabaghi; Neda Saraei; Gerhard Fusch; Niels Rochow; John L Brash; Christoph Fusch; P Ravi Selvaganapathy
Journal:  Biomicrofluidics       Date:  2019-06-27       Impact factor: 2.800

2.  Steel reinforced composite silicone membranes and its integration to microfluidic oxygenators for high performance gas exchange.

Authors:  Harpreet Matharoo; Mohammadhossein Dabaghi; Niels Rochow; Gerhard Fusch; Neda Saraei; Mohammed Tauhiduzzaman; Stephen Veldhuis; John Brash; Christoph Fusch; P Ravi Selvaganapathy
Journal:  Biomicrofluidics       Date:  2018-01-11       Impact factor: 2.800

3.  A Parametric Analysis of Capillary Height in Single-Layer, Small-Scale Microfluidic Artificial Lungs.

Authors:  Lindsay J Ma; Emmanuel A Akor; Alex J Thompson; Joseph A Potkay
Journal:  Micromachines (Basel)       Date:  2022-05-25       Impact factor: 3.523

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.