Literature DB >> 2650532

A visible light-activated direct-bonding material: an in vivo comparative study.

K D O'Brien1, M J Read, R J Sandison, C T Roberts.   

Abstract

A clinical trial was carried out to evaluate and compare the clinical performance of a visible light-cured material with a chemically cured adhesive. This was used in combination with two types of bracket base. Fifty-two patients entered the trial and 542 bracket bases were placed. The incidence and site of bond failure were recorded. The overall failure rate for the light-cured material in combination with both types of bracket was 4.7% and 6% for the chemical-cured adhesive. There were no significant differences detected between the failure rates for both types of adhesive in combination with either bracket base, and no bracket base/adhesive combination proved superior (p greater than 0.05). When the data were examined in an overall manner, a significantly higher posterior tooth failure rate was detected for all adhesive/base combinations (p less than 0.001).

Entities:  

Mesh:

Substances:

Year:  1989        PMID: 2650532     DOI: 10.1016/0889-5406(89)90169-8

Source DB:  PubMed          Journal:  Am J Orthod Dentofacial Orthop        ISSN: 0889-5406            Impact factor:   2.650


  21 in total

1.  Effects of tooth bleaching on shear bond strength of brackets rebonded with a self-etching adhesive system.

Authors:  Ryota Abe; Toshiya Endo; Shohachi Shimooka
Journal:  Odontology       Date:  2011-01-27       Impact factor: 2.634

2.  Comparative Evaluation of Two Bis-GMA Based Orthodontic Bonding Adhesives - A Randomized Clinical Trial.

Authors:  Christine Samantha; Shantha Sundari; Shyamala Chandrasekhar; Gautham Sivamurty; Saravana Dinesh
Journal:  J Clin Diagn Res       Date:  2017-04-01

3.  A comparative assessment of bracket survival and adhesive removal time using flash-free or conventional adhesive for orthodontic bracket bonding: A split-mouth randomized controlled clinical trial.

Authors:  Thorsten Grünheid; Brent E Larson
Journal:  Angle Orthod       Date:  2018-09-19       Impact factor: 2.079

4.  [An in-vitro study of the bonding and fracture pattern of light-hardening, fluoride-releasing bonding materials in metal brackets].

Authors:  H Eberhard; U Hirschfelder; E Nkenke; O Boulouchou; P Martus
Journal:  Fortschr Kieferorthop       Date:  1994-12

Review 5.  Orthodontic bracket bonding techniques and adhesion failures: A systematic review and meta-analysis.

Authors:  André-Luiz-Campos Dos Santos; Letícia-Maira Wambier; Denise-Stadler Wambier; Kelly-Maria-Silva Moreira; José-Carlos-Pettorossi Imparato; Ana-Cláudia-Rodrigues Chibinski
Journal:  J Clin Exp Dent       Date:  2022-09-01

6.  Clinical effect of reducing curing times with high-intensity LED lights.

Authors:  Justin D Ward; Bethany J Wolf; Luis P Leite; Jing Zhou
Journal:  Angle Orthod       Date:  2015-03-11       Impact factor: 2.079

Review 7.  Enamel etching for bonding fixed orthodontic braces.

Authors:  Haikun Hu; Chunjie Li; Fan Li; Jianwei Chen; Jianfeng Sun; Shujuan Zou; Andrew Sandham; Qiang Xu; Philip Riley; Qingsong Ye
Journal:  Cochrane Database Syst Rev       Date:  2013-11-25

8.  Clinical bond failure rates of adhesive precoated self-ligating brackets using a self-etching primer.

Authors:  Mete Ozer; Mehmet Bayram; Cagri Dincyurek; Fuat Tokalak
Journal:  Angle Orthod       Date:  2013-07-02       Impact factor: 2.079

9.  The effect of different soft drinks on the shear bond strength of orthodontic brackets.

Authors:  M Omid Khoda; F Heravi; H Shafaee; H Mollahassani
Journal:  J Dent (Tehran)       Date:  2012-06-30

Review 10.  Adhesives for fixed orthodontic brackets.

Authors:  Nicky A Mandall; Joy Hickman; Tatiana V Macfarlane; Rye Cr Mattick; Declan T Millett; Helen V Worthington
Journal:  Cochrane Database Syst Rev       Date:  2018-04-09
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.