Literature DB >> 26449449

Porous titanium and Ti-35Nb alloy: effects on gene expression of osteoblastic cells derived from human alveolar bone.

Renata Falchete do Prado1, Sylvia Bicalho Rabêlo2, Dennia Perez de Andrade2, Rodrigo Dias Nascimento2, Vinicius André Rodrigues Henriques3, Yasmin Rodarte Carvalho2, Carlos Alberto Alves Cairo3, Luana Marotta Reis de Vasconcellos2.   

Abstract

Tests on titanium alloys that possess low elastic modulus, corrosion resistance and minimal potential toxicity are ongoing. This study aimed to evaluate the behavior of human osteoblastic cells cultured on dense and porous Titanium (Ti) samples comparing to dense and porous Ti-35 Niobium (Ti-35Nb) samples, using gene expression analysis. Scanning electronic microscopy confirmed surface porosity and pore interconnectivity and X-ray diffraction showed titanium beta-phase stabilization in Ti-35Nb alloy. There were no differences in expression of transforming growth factor-β, integrin-β1, alkaline phosphatase, osteopontin, macrophage colony stimulating factor, prostaglandin E synthase, and apolipoprotein E regarding the type of alloy, porosity and experimental period. The experimental period was a significant factor for the markers: bone sialoprotein II and interleukin 6, with expression increasing over time. Porosity diminished Runt-related transcription factor-2 (Runx-2) expression. Cells adhering to the Ti-35Nb alloy showed statistically similar expression to those adhering to commercially pure Ti grade II, for all the markers tested. In conclusion, the molecular mechanisms of interaction between human osteoblasts and the Ti-35Nb alloy follow the principal routes of osseointegration of commercially pure Ti grade II. Porosity impaired the route of transcription factor Runx-2.

Entities:  

Mesh:

Substances:

Year:  2015        PMID: 26449449     DOI: 10.1007/s10856-015-5594-0

Source DB:  PubMed          Journal:  J Mater Sci Mater Med        ISSN: 0957-4530            Impact factor:   3.896


  42 in total

1.  Analysis of relative gene expression data using real-time quantitative PCR and the 2(-Delta Delta C(T)) Method.

Authors:  K J Livak; T D Schmittgen
Journal:  Methods       Date:  2001-12       Impact factor: 3.608

2.  Novel production method of porous surface Ti samples for biomedical application.

Authors:  Luana Marotta Reis de Vasconcellos; Fernanda Nascimento Oliveira; Daniel de Oliveira Leite; Luis Gustavo Oliveira de Vasconcellos; Renata Falchete do Prado; Carolina Judica Ramos; Mário Lima de Alencastro Graça; Carlos Alberto Alves Cairo; Yasmin Rodarte Carvalho
Journal:  J Mater Sci Mater Med       Date:  2011-12-20       Impact factor: 3.896

Review 3.  The elastic moduli of human subchondral, trabecular, and cortical bone tissue and the size-dependency of cortical bone modulus.

Authors:  K Choi; J L Kuhn; M J Ciarelli; S A Goldstein
Journal:  J Biomech       Date:  1990       Impact factor: 2.712

4.  Mechanical properties and osteoconductivity of porous bioactive titanium.

Authors:  Mitsuru Takemoto; Shunshuke Fujibayashi; Mashashi Neo; Jun Suzuki; Tadashi Kokubo; Takashi Nakamura
Journal:  Biomaterials       Date:  2005-10       Impact factor: 12.479

5.  An isolation and in vitro culturing method for human intraoral bone cells derived from dental implant preparation sites.

Authors:  J M Mailhot; J L Borke
Journal:  Clin Oral Implants Res       Date:  1998-02       Impact factor: 5.977

6.  Healing of normal and osteopenic bone with titanium implant and low-level laser therapy (GaAlAs): a histomorphometric study in rats.

Authors:  Luana Marotta Reis de Vasconcellos; Mary Anne Moreira Barbara; Camila Porto Deco; Juliana Campos Junqueira; Renata Falchete do Prado; Ana Lia Anbinder; Luis Gustavo Oliveira de Vasconcellos; Carlos Alberto Alves Cairo; Yasmin Rodarte Carvalho
Journal:  Lasers Med Sci       Date:  2013-04-28       Impact factor: 3.161

7.  The effect of Zr content on the microstructure, mechanical properties and cell attachment of Ti-35Nb-xZr alloys.

Authors:  Congqin Ning; Dongyan Ding; Kerong Dai; Wanyin Zhai; Lei Chen
Journal:  Biomed Mater       Date:  2010-07-06       Impact factor: 3.715

8.  The influence of surface energy of titanium-zirconium alloy on osteoblast cell functions in vitro.

Authors:  Subhash Sista; Cui'e Wen; Peter D Hodgson; Gopal Pande
Journal:  J Biomed Mater Res A       Date:  2011-02-09       Impact factor: 4.396

9.  Effects of thermomechanical process on the microstructure and mechanical properties of a fully martensitic titanium-based biomedical alloy.

Authors:  W Elmay; F Prima; T Gloriant; B Bolle; Y Zhong; E Patoor; P Laheurte
Journal:  J Mech Behav Biomed Mater       Date:  2012-11-09

10.  The differences in toxicity and release of bone-resorbing mediators induced by titanium and cobalt-chromium-alloy wear particles.

Authors:  D R Haynes; S D Rogers; S Hay; M J Pearcy; D W Howie
Journal:  J Bone Joint Surg Am       Date:  1993-06       Impact factor: 5.284

View more
  4 in total

1.  Advances in Laser Additive Manufacturing of Ti-Nb Alloys: From Nanostructured Powders to Bulk Objects.

Authors:  Margarita A Khimich; Konstantin A Prosolov; Tatiana Mishurova; Sergei Evsevleev; Xavier Monforte; Andreas H Teuschl; Paul Slezak; Egor A Ibragimov; Alexander A Saprykin; Zhanna G Kovalevskaya; Andrey I Dmitriev; Giovanni Bruno; Yurii P Sharkeev
Journal:  Nanomaterials (Basel)       Date:  2021-04-29       Impact factor: 5.076

Review 2.  Structural and Material Determinants Influencing the Behavior of Porous Ti and Its Alloys Made by Additive Manufacturing Techniques for Biomedical Applications.

Authors:  Magda Dziaduszewska; Andrzej Zieliński
Journal:  Materials (Basel)       Date:  2021-02-03       Impact factor: 3.623

3.  In Vitro Molecular Study of Titanium-Niobium Alloy Biocompatibility.

Authors:  Laëtitia Chézeau; Alex Tchinda; Gaël Pierson; Pierre Bravetti; Luc Ferrari; Olivier Joubert; Mohamed Zaiou; Bertrand H Rihn
Journal:  Biomedicines       Date:  2022-08-05

4.  In vitro and in vivo biological performance of porous Ti alloys prepared by powder metallurgy.

Authors:  Renata Falchete do Prado; Gabriela Campos Esteves; Evelyn Luzia De Souza Santos; Daiane Acácia Griti Bueno; Carlos Alberto Alves Cairo; Luis Gustavo Oliveira De Vasconcellos; Renata Silveira Sagnori; Fernanda Bastos Pereira Tessarin; Felipe Eduardo Oliveira; Luciane Dias De Oliveira; Maria Fernanda Lima Villaça-Carvalho; Vinicius André Rodrigues Henriques; Yasmin Rodarte Carvalho; Luana Marotta Reis De Vasconcellos
Journal:  PLoS One       Date:  2018-05-17       Impact factor: 3.240

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.