Literature DB >> 2277045

The elastic moduli of human subchondral, trabecular, and cortical bone tissue and the size-dependency of cortical bone modulus.

K Choi1, J L Kuhn, M J Ciarelli, S A Goldstein.   

Abstract

The elastic moduli of human subchondral, trabecular, and cortical bone tissue from a proximal tibia were experimentally determined using three-point bending tests on a microstructural level. The mean modulus of subchondral specimens was 1.15 GPa, and those of trabecular and cortical specimens was 4.59 GPa and 5.44 GPa respectively. Significant differences were found in the modulus values between bone tissues, which may have mainly resulted from the differences in the microstructures of each bone tissue rather than in the mineral density. Furthermore, the size-dependency of the modulus was examined using eight different sizes of cortical specimens (heights h = 100-1000 microns). While the modulus values for relatively large specimens (h greater than 500 microns) remained fairly constant (approximately 15 GPa), the values decreased as the specimens became smaller. A significant correlation was found between the modulus and specimen size. The surface area to volume ratio proved to be a key variable to explain the size-dependency.

Entities:  

Mesh:

Year:  1990        PMID: 2277045     DOI: 10.1016/0021-9290(90)90003-l

Source DB:  PubMed          Journal:  J Biomech        ISSN: 0021-9290            Impact factor:   2.712


  58 in total

1.  Minimum solid area models applied to the prediction of Young's modulus for cancellous bone.

Authors:  K U O'Kelly; A J Carr; B A O McCormack
Journal:  J Mater Sci Mater Med       Date:  2003-04       Impact factor: 3.896

2.  Multi-scale modelling of elastic moduli of trabecular bone.

Authors:  Elham Hamed; Iwona Jasiuk; Andrew Yoo; Yikhan Lee; Tadeusz Liszka
Journal:  J R Soc Interface       Date:  2012-01-25       Impact factor: 4.118

3.  Fabrication and mechanical properties of PLLA/PCL/HA composites via a biomimetic, dip coating, and hot compression procedure.

Authors:  L F Charles; M T Shaw; J R Olson; M Wei
Journal:  J Mater Sci Mater Med       Date:  2010-03-18       Impact factor: 3.896

Review 4.  Methods for assessing bone quality: a review.

Authors:  Eve Donnelly
Journal:  Clin Orthop Relat Res       Date:  2011-08       Impact factor: 4.176

5.  Fluid-structure interaction modeling of calcific aortic valve disease using patient-specific three-dimensional calcification scans.

Authors:  Rotem Halevi; Ashraf Hamdan; Gil Marom; Karin Lavon; Sagit Ben-Zekry; Ehud Raanani; Danny Bluestein; Rami Haj-Ali
Journal:  Med Biol Eng Comput       Date:  2016-02-23       Impact factor: 2.602

6.  Ultrasonic characterisation in determining elastic modulus of trabecular bone material.

Authors:  J Y Rho
Journal:  Med Biol Eng Comput       Date:  1998-01       Impact factor: 2.602

Review 7.  Biomechanics and mechanobiology of trabecular bone: a review.

Authors:  Ramin Oftadeh; Miguel Perez-Viloria; Juan C Villa-Camacho; Ashkan Vaziri; Ara Nazarian
Journal:  J Biomech Eng       Date:  2015-01       Impact factor: 2.097

8.  Hierarchical analysis and multi-scale modelling of rat cortical and trabecular bone.

Authors:  Ramin Oftadeh; Vahid Entezari; Guy Spörri; Juan C Villa-Camacho; Henry Krigbaum; Elsa Strawich; Lila Graham; Christian Rey; Hank Chiu; Ralph Müller; Hamid Nayeb Hashemi; Ashkan Vaziri; Ara Nazarian
Journal:  J R Soc Interface       Date:  2015-05-06       Impact factor: 4.118

9.  Voxel-based micro-finite element analysis of dental implants in a human cadaveric mandible: Tissue modulus assignment and sensitivity analyses.

Authors:  Qiyuan Mao; Kangning Su; Yuxiao Zhou; Mehran Hossaini-Zadeh; Gregory S Lewis; Jing Du
Journal:  J Mech Behav Biomed Mater       Date:  2019-03-13

10.  In vivo evaluation of Zr-based bulk metallic glass alloy intramedullary nails in rat femora.

Authors:  Kazuhiro Imai; Sachiko Hiromoto
Journal:  J Mater Sci Mater Med       Date:  2013-11-27       Impact factor: 3.896

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.