Literature DB >> 26428144

Characterization of new natural cellulosic fiber from Lygeum spartum L.

Z Belouadah1, A Ati2, M Rokbi3.   

Abstract

Integration of new natural fibers in polymer composites field can contribute to increase the production of natural reinforcements and expand their use into new applications. In the present work, new cellulosic fibers were extracted from Lygeum spartum L. plant using an eco-friendly method. The morphological, physico-chemical, thermal and mechanical properties of L. spartum L. fibers were reported for the first time in this paper. The stem anatomy and fiber SEM micrographs showed a strong presence of fiber cells. ATR-FTIR and X-ray analysis proved that these fibers are rich in cellulose content with crystallinity index of 46.19%. The thermogravimetric analysis indicates that the L. spartum fibers are thermally stable until 220 °C with apparent activation energy of 68.77 kJ/mol. Young's modulus, tensile strength and strain at failure were determined from the single fiber tensile test as 13.2 GPa, 280 MPa, and 3.7% respectively.
Copyright © 2015 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  ATR–FTIR; Lygeum spartum L.; Mechanical properties; Stem anatomy; Thermal analysis; X-ray diffraction

Mesh:

Substances:

Year:  2015        PMID: 26428144     DOI: 10.1016/j.carbpol.2015.08.024

Source DB:  PubMed          Journal:  Carbohydr Polym        ISSN: 0144-8617            Impact factor:   9.381


  5 in total

1.  Simultaneous Enzymatic Cellulose Hydrolysis and Product Separation in a Radial-Flow Membrane Bioreactor.

Authors:  Saleha Al-Mardeai; Emad Elnajjar; Raed Hashaikeh; Boguslaw Kruczek; Bart Van der Bruggen; Sulaiman Al-Zuhair
Journal:  Molecules       Date:  2022-01-04       Impact factor: 4.411

2.  Comparative Study on Extraction of Cellulose Fiber from Rice Straw Waste from Chemo-Mechanical and Pulping Method.

Authors:  Nur Amirah Mamat Razali; Risby Mohd Sohaimi; Raja Nor Izawati Raja Othman; Norli Abdullah; Siti Zulaikha Ngah Demon; Latifah Jasmani; Wan Mohd Zain Wan Yunus; Wan Mohd Hanif Wan Ya'acob; Emee Marina Salleh; Mohd Nurazzi Norizan; Norhana Abdul Halim
Journal:  Polymers (Basel)       Date:  2022-01-19       Impact factor: 4.329

3.  Processing, Characterization of Furcraea foetida (FF) Fiber and Investigation of Physical/Mechanical Properties of FF/Epoxy Composite.

Authors:  Abhishek Sadananda Madival; Deepak Doreswamy; Srinivasulu Maddasani; Manjunath Shettar; Raviraj Shetty
Journal:  Polymers (Basel)       Date:  2022-04-06       Impact factor: 4.329

4.  Copernicia Prunifera Leaf Fiber: A Promising New Reinforcement for Epoxy Composites.

Authors:  Raí Felipe Pereira Junio; Lucio Fabio Cassiano Nascimento; Lucas de Mendonça Neuba; Andressa Teixeira Souza; João Victor Barbosa Moura; Fábio da Costa Garcia Filho; Sergio Neves Monteiro
Journal:  Polymers (Basel)       Date:  2020-09-14       Impact factor: 4.329

5.  Characterization on chemical and mechanical properties of silane treated fish tail palm fibres.

Authors:  P Sabarinathan; K Rajkumar; V E Annamalai; K Vishal
Journal:  Int J Biol Macromol       Date:  2020-09-25       Impact factor: 6.953

  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.