Literature DB >> 26115866

Highly Crosslinked-remelted versus Less-crosslinked Polyethylene in Posterior Cruciate-retaining TKAs in the Same Patients.

Young-Hoo Kim1, Jang-Won Park2, Jun-Shik Kim2, June-Hyung Lee2.   

Abstract

BACKGROUND: Concern regarding osteolysis attributable to polyethylene wear after TKA, particularly in younger patients, has prompted the introduction of highly crosslinked-remelted polyethylene (HXLPE) for TKAs. However, few in vivo comparative results of TKAs using HXLPE and less-crosslinked polyethylene inserts in the same patients are available, regarding fracture or failure of the locking mechanism of tibial polyethylene inserts or of osteolysis in patients younger than 60 years. QUESTIONS/PURPOSES: We wanted to determine whether (1) survivorship free from aseptic loosening in knees with HXLPE inserts was different from survivorship in knees with less-crosslinked polyethylene inserts, (2) the prevalence of fracture or failure of the locking mechanism of the tibial polyethylene insert was greater in knees with HXLPE than in those with less-crosslinked polyethylene, and (3) the proportion of patients who had osteolysis develop was greater with HXLPE than with less-crosslinked polyethylene inserts.
METHODS: One hundred seventy-one patients with a mean age of 58 ± 8 years (range, 35-59 years) received posterior cruciate-retaining prostheses with a less-crosslinked polyethylene tibial insert in one knee and a HXLPE tibial insert in the contralateral knee. From January 2007 to January 2010, we performed 366 same-day bilateral simultaneous sequential posterior cruciate-retaining TKAs in 183 patients, of whom 171 (93%) participated in this study. All patients during this study period underwent posterior cruciate-retaining TKAs regardless of deformity of the knees and we did not perform posterior-stabilized TKAs during the same period. Patients who had bilateral end-stage osteoarthritis and were younger than 60 years were selected for inclusion. Six patients (4%) were lost to followup before 5 years. Twenty-six patients were males and 145 were females. The mean duration of followup was 6 years (range, 5-8 years). At each followup, patients were assessed for loosening of the components, fracture or failure of the locking mechanism of the polyethylene inserts, or osteolysis.
RESULTS: The survival rate of the knee prosthesis at a mean of 5.8 years after surgery was 100% (95% CI, 0.95-1.00) in both groups for the endpoint aseptic loosening and 99.4% (95% CI, 0.95-1.00) in both groups for the endpoint revision. No knee in either group had fracture or failure of the locking mechanism of the tibial polyethylene insert, and none had osteolysis.
CONCLUSIONS: With the numbers available, we found no clinically important differences between HXLPE and less-crosslinked polyethylene inserts in posterior cruciate-retaining TKAs. Given that HXLPE is newer, as-yet unproven, and more expensive than the proven technology (less-crosslinked polyethylene), we suggest not adopting HXLPE for clinical use until it shows superiority. LEVEL OF EVIDENCE: Level I, therapeutic study.

Entities:  

Mesh:

Substances:

Year:  2015        PMID: 26115866      PMCID: PMC4586214          DOI: 10.1007/s11999-015-4425-4

Source DB:  PubMed          Journal:  Clin Orthop Relat Res        ISSN: 0009-921X            Impact factor:   4.176


  30 in total

1.  Comparison of cross-linked polyethylene materials for orthopaedic applications.

Authors:  John P Collier; Barbara H Currier; Francis E Kennedy; John H Currier; Graham S Timmins; Simon K Jackson; Robin L Brewer
Journal:  Clin Orthop Relat Res       Date:  2003-09       Impact factor: 4.176

2.  Cemented long-stem revision total knee arthroplasty.

Authors:  Andrew L Whaley; Robert T Trousdale; James A Rand; Arlen D Hanssen
Journal:  J Arthroplasty       Date:  2003-08       Impact factor: 4.757

Review 3.  Sources of osteolysis around total knee arthroplasty: wear of the bearing surface.

Authors:  Douglas D Naudie; Cecil H Rorabeck
Journal:  Instr Course Lect       Date:  2004

4.  Stresses in polyethylene components of contemporary total knee replacements.

Authors:  D L Bartel; J J Rawlinson; A H Burstein; C S Ranawat; W F Flynn
Journal:  Clin Orthop Relat Res       Date:  1995-08       Impact factor: 4.176

5.  Femoral rotational alignment, based on the anteroposterior axis, in total knee arthroplasty in a valgus knee. A technical note.

Authors:  J Arima; L A Whiteside; D S McCarthy; S E White
Journal:  J Bone Joint Surg Am       Date:  1995-09       Impact factor: 5.284

6.  Osteolysis after total knee arthroplasty without cement.

Authors:  P C Peters; G A Engh; K A Dwyer; T N Vinh
Journal:  J Bone Joint Surg Am       Date:  1992-07       Impact factor: 5.284

7.  Osteolysis around cementless porous-coated anatomic knee prostheses.

Authors:  Y H Kim; J H Oh; S H Oh
Journal:  J Bone Joint Surg Br       Date:  1995-03

8.  Fracture of the polyethylene tibial post in a posterior cruciate-substituting total knee arthroplasty mimicking patellar clunk syndrome: a report of 5 cases.

Authors:  David R Mauerhan
Journal:  J Arthroplasty       Date:  2003-10       Impact factor: 4.757

9.  Osteolysis of the distal femur after total knee arthroplasty.

Authors:  A Cadambi; G A Engh; K A Dwyer; T N Vinh
Journal:  J Arthroplasty       Date:  1994-12       Impact factor: 4.757

Review 10.  Polyethylene damage in total knees and use of highly crosslinked polyethylene.

Authors:  Orhun K Muratoglu; Arthur Mark; David A Vittetoe; William H Harris; Harry E Rubash
Journal:  J Bone Joint Surg Am       Date:  2003       Impact factor: 5.284

View more
  6 in total

Review 1.  Larger range of motion and increased return to activity, but higher revision rates following unicompartmental versus total knee arthroplasty in patients under 65: a systematic review.

Authors:  Laura J Kleeblad; Jelle P van der List; Hendrik A Zuiderbaan; Andrew D Pearle
Journal:  Knee Surg Sports Traumatol Arthrosc       Date:  2017-11-28       Impact factor: 4.342

2.  No Reduction in Revision Risk Associated With Highly Cross-linked Polyethylene With or Without Antioxidants Over Conventional Polyetheylene in TKA: An Analysis From the American Joint Replacement Registry.

Authors:  Jamil Kendall; Christopher E Pelt; Benjamin Imlay; Patrick Yep; Kyle Mullen; Ryland Kagan
Journal:  Clin Orthop Relat Res       Date:  2022-08-19       Impact factor: 4.755

3.  Comparison of long-term clinical outcomes after bilateral mobile-bearing total knee arthroplasties using PCL-retaining and PCL-substituting implants in the same patients.

Authors:  Yoshinori Ishii; Hideo Noguchi; Junko Sato; Tetsuya Sakurai; Shin-Ichi Toyabe
Journal:  Knee Surg Sports Traumatol Arthrosc       Date:  2016-04-30       Impact factor: 4.342

Review 4.  Comparable results between crosslinked polyethylene and conventional ultra-high molecular weight polyethylene implanted in total knee arthroplasty: systematic review and meta-analysis of randomised clinical trials.

Authors:  Alessandro Bistolfi; Fortunato Giustra; Francesco Bosco; Carlotta Faccenda; Marianna Viotto; Luigi Sabatini; Paola Berchialla; Veronica Sciannameo; Eugenio Graziano; Alessandro Massè
Journal:  Knee Surg Sports Traumatol Arthrosc       Date:  2022-02-19       Impact factor: 4.114

5.  Molded, Gamma-radiated, Argon-processed Polyethylene Components of Rotating Hinge Knee Megaprostheses Have a Lower Failure Hazard and Revision Rates Than Air-sterilized, Machined, Ram-extruded Bar Stock Components.

Authors:  Ana C Belzarena; Mohammad A Elalfy; Mohamed A Yakoub; John H Healey
Journal:  Clin Orthop Relat Res       Date:  2021-01-01       Impact factor: 4.755

6.  CORR Insights®: Molded, Gamma-radiated, Argon-processed Polyethylene Components of Rotating Hinge Knee Megaprostheses Have Lower Failure Hazard Revision Rates Than Air-sterilized, Machined, Ram-extruded Bar Stock Components.

Authors:  Chigusa Sawamura
Journal:  Clin Orthop Relat Res       Date:  2021-01-01       Impact factor: 4.755

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.