Literature DB >> 24580003

Accuracy of intraoperative computed tomography image-guided surgery in placing pedicle and pelvic screws for primary versus revision spine surgery.

Joseph C Hsieh1, Doniel Drazin, Alexander O Firempong, Robert Pashman, J Patrick Johnson, Terrence T Kim.   

Abstract

OBJECT: Revision spine surgery, which is challenging due to disrupted anatomy, poor fluoroscopic imaging, and altered tactile feedback, may benefit from CT image-guided surgery (CT-IGS). This study evaluates accuracy of CT-IGS-navigated screws in primary versus revision spine surgery.
METHODS: Pedicle and pelvic screws placed with the O-arm in 28 primary (313 screws) and 33 revision (429 screws) cases in which institutional postoperative CT scans were available were retrospectively reviewed for placement accuracy. Screw accuracy was categorized as 1) good (< 1-mm pedicle breach in any direction or "in-out-in" thoracic screws through the lateral thoracic pedicle wall and in the costovertebral joint); 2) fair (1- to 3-mm breach); or 3) poor (> 3-mm breach).
RESULTS: Use of CT-IGS resulted in high rates of good or fair screws for both primary (98.7%) and revision (98.6%) cases. Rates of good or fair screws were comparable for the following regions: C7-T3 at 100% (good or fair) in primary versus 100% (good or fair) in revision; T4-9 at 96.8% versus 100%; T10-L2 at 98.2% versus 99.3%; L3-5 at 100% versus 99.2%; and pelvis at 98.7% versus 98.6%, respectively. On the other hand, revision sacral screws had statistically significantly lower rates of good placement compared with primary (100% primary vs 80.6% revision, p = 0.027). Of these revision sacral screws, 11.1% had poor placement, with bicortical screws extending > 3 mm beyond the anterior cortex. Revision pelvic screws demonstrated the highest rate of fair placement (28%), with the mode of medial breach in all cases directed into the sacral-iliac joint.
CONCLUSIONS: In the cervical, thoracic, and lumbar spine, CT-IGS demonstrated comparable accuracy rates for both primary and revision spine surgery. Use of 3D imaging of the bony pedicle anatomy appears to be sufficient for the spine surgeon to overcome the difficulties associated with instrumentation in revision cases. Although the bony structures of sacral pedicles and pelvis are relatively larger, the complexity of local anatomy was not overcome with CT-IGS, and an increased trend toward inaccurate screw placement was demonstrated.

Entities:  

Mesh:

Year:  2014        PMID: 24580003     DOI: 10.3171/2014.1.FOCUS13525

Source DB:  PubMed          Journal:  Neurosurg Focus        ISSN: 1092-0684            Impact factor:   4.047


  15 in total

1.  Awareness of the median sacral artery during lumbosacral spinal surgery: an anatomic cadaveric study of its relationship to the lumbosacral spine.

Authors:  Surachai Sae-Jung; Kimaporn Khamanarong; Worawut Woraputtaporn; Pattama Amarttayakong
Journal:  Eur Spine J       Date:  2014-11-01       Impact factor: 3.134

2.  Application of a novel 3D drill template for cervical pedicle screw tunnel design: a cadaveric study.

Authors:  Zhengxi Yu; Guodong Zhang; Xuanhuang Chen; Xu Chen; Changfu Wu; Yijun Lin; Wenhua Huang; Haibin Lin
Journal:  Eur Spine J       Date:  2017-06-10       Impact factor: 3.134

3.  Reliability of the Planned Pedicle Screw Trajectory versus the Actual Pedicle Screw Trajectory using Intra-operative 3D CT and Image Guidance.

Authors:  Catherine A Miller; Charles G Ledonio; Matthew A Hunt; Farhan Siddiq; David W Polly
Journal:  Int J Spine Surg       Date:  2016-10-24

4.  Accuracy of screw fixation using the O-arm® and StealthStation® navigation system for unstable pelvic ring fractures.

Authors:  Jun Takeba; Kensuke Umakoshi; Satoshi Kikuchi; Hironori Matsumoto; Suguru Annen; Naoki Moriyama; Yuki Nakabayashi; Norio Sato; Mayuki Aibiki
Journal:  Eur J Orthop Surg Traumatol       Date:  2017-11-09

5.  Accurate placement of cervical pedicle screws using 3D-printed navigational templates : An improved technique with continuous image registration.

Authors:  Guodong Zhang; Zhengxi Yu; Xuanhuang Chen; Xu Chen; Changfu Wu; Yijun Lin; Wenhua Huang; Haibin Lin
Journal:  Orthopade       Date:  2018-05       Impact factor: 1.087

Review 6.  Percutaneous screw placement in the lumbar spine with a modified guidance technique based on 3D CT navigation system.

Authors:  Ioannis D Siasios; John Pollina; Asham Khan; Vassilios George Dimopoulos
Journal:  J Spine Surg       Date:  2017-12

7.  Osteotomies through a fusion mass in the lumbar spine.

Authors:  Jean-Marc Vital; Louis Boissière; Anouar Bourghli; Jean-Etienne Castelain; Vincent Challier; Ibrahim Obeid
Journal:  Eur Spine J       Date:  2014-11-22       Impact factor: 3.134

Review 8.  Differences between Manufacturers of Computed Tomography-Based Computer-Assisted Surgery Systems Do Exist: A Systematic Literature Review.

Authors:  Anas Nooh; Joushua Lubov; Ahmed Aoude; Sultan Aldebeyan; Peter Jarzem; Jean Ouellet; Michael H Weber
Journal:  Global Spine J       Date:  2017-02-01

9.  Screw Placement Accuracy and Outcomes Following O-Arm-Navigated Atlantoaxial Fusion: A Feasibility Study.

Authors:  Jacob D Smith; Megan M Jack; Nicholas R Harn; Judson R Bertsch; Paul M Arnold
Journal:  Global Spine J       Date:  2015-09-21

Review 10.  Minimally Invasive Spinal Surgery with Intraoperative Image-Guided Navigation.

Authors:  Terrence T Kim; J Patrick Johnson; Robert Pashman; Doniel Drazin
Journal:  Biomed Res Int       Date:  2016-04-24       Impact factor: 3.411

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.