Literature DB >> 23875432

CAD/CAM complete dentures: a review of two commercial fabrication systems.

Mathew T Kattadiyil1, Charles J Goodacre, Nadim Z Baba.   

Abstract

The use of computer-aided design and computer-aided manufacturing (CAD/CAM) has become available for complete dentures through the AvaDent and Dentca systems. AvaDent uses laser scanning and computer technology. Teeth are arranged and bases formed using proprietary software.The bases are milled from prepolymerized pucks of resin. Dentca uses computer software to produce virtual maxillary and mandibular edentulous ridges, arrange the teeth and form bases. The dentures are fabricated using a conventional processing technique.

Mesh：

Substances：

Year:  2013        PMID： 23875432

Source DB:  PubMed          Journal:  J Calif Dent Assoc        ISSN： 1043-2256


  24 in total

Review 1.  Clinical application and research progress of digital complete denture.

Authors:  Yong-Sheng Zhou; Yu-Chun Sun; Yong Wang
Journal:  Hua Xi Kou Qiang Yi Xue Za Zhi       Date:  2021-02-01

2.  CAD/CAM produces dentures with improved fit.

Authors:  Otto Steinmassl; Herbert Dumfahrt; Ingrid Grunert; Patricia-Anca Steinmassl
Journal:  Clin Oral Investig       Date:  2018-02-22       Impact factor: 3.573

3.  Tissue Surface Adaptation and Clinical Performance of CAD-CAM Milled versus Conventional Implant-Assisted Mandibular Overdenture.

Authors:  Noha H El-Shaheed; Hanadi A Lamfon; Rabab I Salama; Amira Mohammed Gomaa Faramawy; Aisha Zakaria Hashem Mostafa
Journal:  Int J Dent       Date:  2022-06-16

4.  The residual monomer content and mechanical properties of CAD\CAM resins used in the fabrication of complete dentures as compared to heat cured resins.

Authors:  Al-Dharrab Ayman
Journal:  Electron Physician       Date:  2017-07-25

5.  The influence of polishing techniques on pre-polymerized CAD\CAM acrylic resin denture bases.

Authors:  Manal Rahma Alammari
Journal:  Electron Physician       Date:  2017-10-25

6.  Total CAD/CAM Supported Method for Manufacturing Removable Complete Dentures.

Authors:  Arthur Furtado de Mendonça; Mario Furtado de Mendonça; George Shelby White; Georges Sara; Darren Littlefair
Journal:  Case Rep Dent       Date:  2016-11-16

7.  Adherence of Candida to complete denture surfaces in vitro: A comparison of conventional and CAD/CAM complete dentures.

Authors:  Afnan F Al-Fouzan; Lamya A Al-Mejrad; Ahmed M Albarrag
Journal:  J Adv Prosthodont       Date:  2017-10-16       Impact factor: 1.904

Review 8.  Trends in computer-aided manufacturing in prosthodontics: a review of the available streams.

Authors:  Jaafar Abduo; Karl Lyons; Mohammed Bennamoun
Journal:  Int J Dent       Date:  2014-04-08

9.  A first experience with digital complete overdentures.

Authors:  Salwa Omar Bajunaid
Journal:  Saudi Dent J       Date:  2016-07-22

Review 10.  A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication.

Authors:  Mehmet Selim Bilgin; Ebru Nur Baytaroğlu; Ali Erdem; Erhan Dilber
Journal:  Eur J Dent       Date:  2016 Apr-Jun
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.