Literature DB >> 2329115

In vitro biocompatibility of polyetheretherketone and polysulfone composites.

L M Wenz1, K Merritt, S A Brown, A Moet, A D Steffee.   

Abstract

Short carbon fiber reinforced composites could potentially replace some of the metal alloys used in orthopedic implants. In particular, polysulfone and, more recently, polyetheretherketone have been considered as the matrix material for carbon fiber reinforced composite implant materials. ASTM standards F813 and F619 for direct contact cell culture evaluation and extraction were employed to determine the in vitro biocompatibility of a carbon fiber composite of polyetheretherketone, PEEK, in comparison to a carbon fiber reinforced polysulfone composite. The cell cultures were assessed qualitatively by microscopy and quantitatively using an enzyme assay to determine cytotoxicity. Overall, the cellular response to the PEEK and polysulfone composites were negligible indicating that further in vivo studies with these materials are appropriate.

Entities:  

Mesh:

Substances:

Year:  1990        PMID: 2329115     DOI: 10.1002/jbm.820240207

Source DB:  PubMed          Journal:  J Biomed Mater Res        ISSN: 0021-9304


  34 in total

1.  Posterior lumbar fusion by peek rods in degenerative spine: preliminary report on 30 cases.

Authors:  F De Iure; G Bosco; M Cappuccio; S Paderni; L Amendola
Journal:  Eur Spine J       Date:  2012-03-09       Impact factor: 3.134

2.  Response of primary fibroblasts and osteoblasts to plasma treated polyetheretherketone (PEEK) surfaces.

Authors:  D Briem; S Strametz; K Schröder; N M Meenen; W Lehmann; W Linhart; A Ohl; J M Rueger
Journal:  J Mater Sci Mater Med       Date:  2005-07       Impact factor: 3.896

3.  Wear studies on the likely performance of CFR-PEEK/CoCrMo for use as artificial joint bearing materials.

Authors:  S C Scholes; A Unsworth
Journal:  J Mater Sci Mater Med       Date:  2008-08-14       Impact factor: 3.896

4.  ACDF Using the Solis Cage with Iliac Bone Graft in Single Level: Clinical and Radiological Outcomes in Average 36 months Follow-up.

Authors:  Si-Hyuck Oh; Kyeong-Wook Yoon; Young-Jin Kim; Sang-Koo Lee
Journal:  Korean J Spine       Date:  2013-06-30

Review 5.  3-dimensional printing for anterior cervical surgery: a review.

Authors:  Wen Jie Choy; William C H Parr; Kevin Phan; William R Walsh; Ralph J Mobbs
Journal:  J Spine Surg       Date:  2018-12

6.  Evaluation of the effect of the concentration of plasticizer di(2-ethylhexyl) phthalate on the quantity of residual monomer vinyl chloride in PVC chest drainage tubes.

Authors:  Y I Kicheva; H Richter; E Popova
Journal:  J Mater Sci Mater Med       Date:  2004-08       Impact factor: 3.896

7.  Response to polyetherimide based composite materials implanted in muscle and in bone.

Authors:  A Merolli; V Perrone; P Tranquilli Leali; L Ambrosio; R De Santis; L Nicolais; C Gabbi
Journal:  J Mater Sci Mater Med       Date:  1999-05       Impact factor: 3.896

8.  Behaviour of photopolymerized silicate glass fibre-reinforced dimethacrylate composites subjected to hydrothermal ageing: part II. Hydrolytic stability of mechanical properties.

Authors:  K C Kennedy; T Chen; R P Kusy
Journal:  J Mater Sci Mater Med       Date:  1998-11       Impact factor: 3.896

9.  The response of primary rat and human osteoblasts and an immortalized rat osteoblast cell line to orthopaedic materials: comparative sensitivity of several toxicity indices.

Authors:  R Macnair; E H Rodgers; C Macdonald; A Wykman; I Goldie; M H Grant
Journal:  J Mater Sci Mater Med       Date:  1997-02       Impact factor: 3.896

10.  Two-level contiguous cervical disc disease treated with peek cages packed with demineralized bone matrix: results of 3-year follow-up.

Authors:  Kivanç Topuz; Ahmet Colak; Serdar Kaya; Hakan Simşek; Murat Kutlay; Mehmet Nusret Demircan; Murat Velioğlu
Journal:  Eur Spine J       Date:  2009-01-08       Impact factor: 3.134

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.