Literature DB >> 23007129

Effects of ageing and staining on color of acrylic resin denture teeth.

Wendy C Gregorius1, Mathew T Kattadiyil, Charles J Goodacre, Clyde L Roggenkamp, John M Powers, Rade D Paravina.   

Abstract

OBJECTIVES: To assess the color stability of high-strength acrylic resin denture teeth after exposure to red wine, coffee and artificial ageing.
METHODS: Four different shades of acrylic resin denture teeth were selected from three manufacturers. The teeth were evaluated in two phases: Phase I, upon staining for 7 days in distilled water (control Group A), red wine (experimental Group B) and coffee (experimental Group C), and Phase II, upon artificial ageing in a Weather-Ometer for a total exposure of 150 kJ/m(2) (control Group A; Phase I). Denture tooth positioning jigs were fabricated and color data recorded by means of an intra-oral spectrophotometer and expressed using the Commission Internationale d'Eclairage (CIE) L*a*b* color notation system. Means and standard deviations were determined. The staining data were analysed by three-way ANOVA, while the artificial ageing data were analysed by two-way ANOVA. Fisher's PLSD intervals were calculated at a significance level of P ≤ 0.05.
RESULTS: In the staining experiment, the main effects of stains and denture teeth and the two-way and three-way interactions among stains, denture teeth and shades were significant (P ≤ 0.05). The same was true for the main effects of denture teeth and shades and their interactions in the ageing experiment. The smallest overall color change upon staining in red wine was recorded for Vita Physiodens denture teeth (ΔE*=0.9 ± 0.4), followed by SR Vivodent PE 1.2 (0.6) and Portrait IPN 2.4 (0.6). Corresponding values for staining in coffee were 2.0 (0.6), 1.7 (1.0) and 1.8 (0.8), while ageing-dependent changes in color were 1.7 (0.4), 2.4 (0.8) and 1.1 (0.4) for Portrait IPN, SR Vivodent PE and Vita Physiodens teeth, respectively.
CONCLUSION: Although the null hypothesis has been partially rejected, because some statistically significant changes in color and color coordinates occurred upon staining and ageing, all evaluated denture teeth exhibited good color stability compared to the 50:50% acceptability threshold used in data interpretation. CLINICAL SIGNIFICANCE: Selection of a color stable and stain-resistant denture tooth can contribute to denture longevity and overall patient satisfaction.
Copyright © 2012 Elsevier Ltd. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2012        PMID: 23007129     DOI: 10.1016/j.jdent.2012.09.009

Source DB:  PubMed          Journal:  J Dent        ISSN: 0300-5712            Impact factor:   4.379


  7 in total

1.  Color stability of denture teeth and acrylic base resin subjected daily to various consumer cleansers.

Authors:  Audrey Moon; John M Powers; Sudarat Kiat-Amnuay
Journal:  J Esthet Restor Dent       Date:  2014-06-30       Impact factor: 2.843

2.  Surface properties of multilayered, acrylic resin artificial teeth after immersion in staining beverages.

Authors:  Karin Hermana Neppelenbroek; Eduardo Kuroishi; Juliana Hotta; Vinicius Rizzo Marques; Eduardo Buozi Moffa; Simone Soares; Vanessa Migliorini Urban
Journal:  J Appl Oral Sci       Date:  2015 Jul-Aug       Impact factor: 2.698

3.  Color Stability of Composites After Short-term Oral Simulation: An in vitro Study.

Authors:  Didem Öner Özdaş; Mağrur Kazak; Aylin Çilingir; Meryem Gülce Subaşı; Murat Tiryaki; Şölen Günal
Journal:  Open Dent J       Date:  2016-08-31

4.  Effects of thermocycling and various drinks on the color stability of heat-polymerized acrylic resin.

Authors:  Pinar Altinci; Pinar Durkaya
Journal:  J Istanb Univ Fac Dent       Date:  2016-10-01

5.  Characterization of various acrylate based artificial teeth for denture fabrication.

Authors:  Nawshad Muhammad; Zenab Sarfraz; Muhammad Sohail Zafar; Saad Liaqat; Abdur Rahim; Pervaiz Ahmad; Abdullah Alsubaie; Abdulraheem S A Almalki; Mayeen Uddin Khandaker
Journal:  J Mater Sci Mater Med       Date:  2022-01-24       Impact factor: 3.896

6.  Color Stability of Different Denture Teeth Following Immersion in Staining Solutions.

Authors:  Marzieh Ehsani; Leyla Sadighpour; Farideh Geramipanah; Azita Ehsani; Sima Shahabi
Journal:  Front Dent       Date:  2022-02-01

7.  Colour Stability of 3D-Printed and Prefabricated Denture Teeth after Immersion in Different Colouring Agents-An In Vitro Study.

Authors:  Mariya Dimitrova; Bozhana Chuchulska; Stefan Zlatev; Rada Kazakova
Journal:  Polymers (Basel)       Date:  2022-07-31       Impact factor: 4.967

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.