Literature DB >> 22872832

Application of virtual surgical planning with computer assisted design and manufacturing technology to cranio-maxillofacial surgery.

Linping Zhao1, Pravin K Patel, Mimis Cohen.   

Abstract

Computer aided design and manufacturing (CAD/CAM) technology today is the standard in manufacturing industry. The application of the CAD/CAM technology, together with the emerging 3D medical images based virtual surgical planning (VSP) technology, to craniomaxillofacial reconstruction has been gaining increasing attention to reconstructive surgeons. This article illustrates the components, system and clinical management of the VSP and CAD/CAM technology including: data acquisition, virtual surgical and treatment planning, individual implant design and fabrication, and outcome assessment. It focuses primarily on the technical aspects of the VSP and CAD/CAM system to improve the predictability of the planning and outcome.

Entities:  

Keywords:  Computer aided design and manufacturing; Computer assisted image processing; Computer-assisted surgery; Reconstructive surgical procedures; Three-dimensional imaging

Year:  2012        PMID： 22872832      PMCID： PMC3408274          DOI： 10.5999/aps.2012.39.4.309

Source DB:  PubMed          Journal:  Arch Plast Surg        ISSN： 2234-6163


  31 in total

1.  Craniofacial measurements based on 3D-CT volume rendering: implications for clinical applications.

Authors:  M G P Cavalcanti; S S Rocha; M W Vannier
Journal:  Dentomaxillofac Radiol       Date:  2004-05       Impact factor: 2.419

2.  Validation study of skull three-dimensional computerized tomography measurements.

Authors:  C F Hildebolt; M W Vannier; R H Knapp
Journal:  Am J Phys Anthropol       Date:  1990-07       Impact factor: 2.868

3.  Reconstruction of craniofacial bone defects with individual alloplastic implants based on CAD/CAM-manipulated CT-data.

Authors:  H Eufinger; M Wehmöller; E Machtens; L Heuser; A Harders; D Kruse
Journal:  J Craniomaxillofac Surg       Date:  1995-06       Impact factor: 2.078

4.  Three-dimensional measurement accuracy of skull surface landmarks.

Authors:  C F Hildebolt; M W Vannier
Journal:  Am J Phys Anthropol       Date:  1988-08       Impact factor: 2.868

5.  Three-dimensional imaging of bone from computerized tomography.

Authors:  S T Woolson; P Dev; L L Fellingham; A Vassiliadis
Journal:  Clin Orthop Relat Res       Date:  1986-01       Impact factor: 4.176

6.  Computer-designed prostheses for orbitocranial reconstruction.

Authors:  B A Toth; D S Ellis; W B Stewart
Journal:  Plast Reconstr Surg       Date:  1988-03       Impact factor: 4.730

Review 7.  Craniofacial computer-assisted surgical planning and simulation.

Authors:  L J Lo; J L Marsh; M W Vannier; V V Patel
Journal:  Clin Plast Surg       Date:  1994-10       Impact factor: 2.017

8.  Reconstruction of a cranial bone defect with hydroxyapatite and free flap transfer.

Authors:  Y Tanaka; K Matsumoto; S Song; S Tajima; T Ohmura
Journal:  J Craniofac Surg       Date:  1997-03       Impact factor: 1.046

9.  Three-dimensional osteotomy planning in maxillofacial surgery including soft tissue prediction.

Authors:  Anders Westermark; Stefan Zachow; Barry L Eppley
Journal:  J Craniofac Surg       Date:  2005-01       Impact factor: 1.046

10.  The value of stereolithographic models for preoperative diagnosis of craniofacial deformities and planning of surgical corrections.

Authors:  H F Sailer; P E Haers; C P Zollikofer; T Warnke; F R Carls; P Stucki
Journal:  Int J Oral Maxillofac Surg       Date:  1998-10       Impact factor: 2.789
View more
  25 in total

1.  Planning of skull reconstruction based on a statistical shape model combined with geometric morphometrics.

Authors:  Marc Anton Fuessinger; Steffen Schwarz; Carl-Peter Cornelius; Marc Christian Metzger; Edward Ellis; Florian Probst; Wiebke Semper-Hogg; Mathieu Gass; Stefan Schlager
Journal:  Int J Comput Assist Radiol Surg       Date:  2017-10-28       Impact factor: 2.924

2.  Virtual surgical planning in craniofacial surgery.

Authors:  Harvey Chim; Nicholas Wetjen; Samir Mardini
Journal:  Semin Plast Surg       Date:  2014-08       Impact factor: 2.314

Review 3.  Biomaterials for craniofacial bone engineering.

Authors:  R Tevlin; A McArdle; D Atashroo; G G Walmsley; K Senarath-Yapa; E R Zielins; K J Paik; M T Longaker; D C Wan
Journal:  J Dent Res       Date:  2014-08-19       Impact factor: 6.116

4.  Ancillary procedures necessary for translational research in experimental craniomaxillofacial surgery.

Authors:  Mohammed Al-Rakan; Jaimie T Shores; Steve Bonawitz; Gabriel Santiago; Joani M Christensen; Gerald Grant; Ryan J Murphy; Ehsan Basafa; Mehran Armand; Pete Otovic; Sue Eller; Gerald Brandacher; Chad R Gordon
Journal:  J Craniofac Surg       Date:  2014-11       Impact factor: 1.046

5.  The Role of Virtual Surgical Planning in the Era of Robotic Surgery.

Authors:  Jae Young Kim; Won Shik Kim; Eun Chang Choi; Woong Nam
Journal:  Yonsei Med J       Date:  2016-01       Impact factor: 2.759

6.  Skeletal Deformity in Patients With Unilateral Coronal Craniosynostosis: Perceptions of the General Public.

Authors:  Emilie Robertson; Peter Kwan; Gorman Louie; Pierre Boulanger; Daniel Aalto
Journal:  Craniomaxillofac Trauma Reconstr       Date:  2020-03-25

7.  Virtual surgical planning is a useful tool in the surgical management of mandibular condylar fractures.

Authors:  Shubhechha Shakya; Kai-De Li; Dou Huang; Zuo-Qiang Liu; Xiao Zhang; Lei Liu
Journal:  Chin J Traumatol       Date:  2021-12-10

8.  Three-dimensional virtual operations can facilitate complicated surgical planning for the treatment of patients with jaw deformities associated with facial asymmetry: a case report.

Authors:  Shingo Hara; Masaharu Mitsugi; Takahiro Kanno; Akihiko Nomachi; Takehiko Wajima; Yukihiro Tatemoto
Journal:  Int J Oral Sci       Date:  2013-08-02       Impact factor: 6.344

9.  Virtual surgical planning and 3D printing in prosthetic orbital reconstruction with percutaneous implants: a technical case report.

Authors:  Yu-Hui Huang; Rosemary Seelaus; Linping Zhao; Pravin K Patel; Mimis Cohen
Journal:  Int Med Case Rep J       Date:  2016-10-31

10.  Computer-aided resection and endoprosthesis design for the management of malignant bone tumors around the knee: outcomes of 12 cases.

Authors:  Huan-wen Ding; Guang-wen Yu; Qiang Tu; Bao Liu; Jian-jian Shen; Hong Wang; Ying-jun Wang
Journal:  BMC Musculoskelet Disord       Date:  2013-11-22       Impact factor: 2.362
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.