PURPOSE: Due to the attractive properties of poly(L-lactic acid) (PLLA) for tissue engineering, the aim was to determine the growth and differentiation capacity of mesenchymal stromal cells (MSCs) in PLLA scaffolds and their potential use in the treatment of cartilage diseases. METHODS: MSCs were cultured in PLLA films and thin porous membranes to study adherence and proliferation. Permeability and porosity were determined for the different scaffolds employed. The optimal conditions for cell seeding were first determined, as well as cell density and distribution inside the PLLA. Scaffolds were then maintained in expansion or chondrogenic differentiation media for 21 days. Apoptosis, proliferation and chondrogenic differentiation was assessed after 21 days in culture by immunohistochemistry. Mechanical characteristics of scaffolds were determined before and after cell seeding. RESULTS: MSCs uniformly adhered to PLLA films as well as to porous membranes. Proliferation was detected only in monolayers of pure PLLA, but was no longer detected after 10 days. Mechanical characterization of PLLA scaffolds showed differences in the apparent compression elastic modulus for the two sizes used. After determining high efficiencies of seeding, the production of extracellular matrix (ECM) was determined and contained aggrecan and collagens type I and X. ECM produced by the cells induced a twofold increase in the apparent elastic modulus of the composite. CONCLUSIONS: Biocompatible PLLA scaffolds have been developed that can be efficiently loaded with MSCs. The scaffold supports chondrogenic differentiation and ECM deposition that improves the mechanics of the scaffold. Although this improvement does not met the expectations of a hyaline-like cartilage ECM, in part due to the lack of a mechanical stimulation, their potential use in the treatment of cartilage pathologies encourages to improve the mechanical component.
PURPOSE: Due to the attractive properties of poly(L-lactic acid) (PLLA) for tissue engineering, the aim was to determine the growth and differentiation capacity of mesenchymal stromal cells (MSCs) in PLLA scaffolds and their potential use in the treatment of cartilage diseases. METHODS: MSCs were cultured in PLLA films and thin porous membranes to study adherence and proliferation. Permeability and porosity were determined for the different scaffolds employed. The optimal conditions for cell seeding were first determined, as well as cell density and distribution inside the PLLA. Scaffolds were then maintained in expansion or chondrogenic differentiation media for 21 days. Apoptosis, proliferation and chondrogenic differentiation was assessed after 21 days in culture by immunohistochemistry. Mechanical characteristics of scaffolds were determined before and after cell seeding. RESULTS: MSCs uniformly adhered to PLLA films as well as to porous membranes. Proliferation was detected only in monolayers of pure PLLA, but was no longer detected after 10 days. Mechanical characterization of PLLA scaffolds showed differences in the apparent compression elastic modulus for the two sizes used. After determining high efficiencies of seeding, the production of extracellular matrix (ECM) was determined and contained aggrecan and collagens type I and X. ECM produced by the cells induced a twofold increase in the apparent elastic modulus of the composite. CONCLUSIONS: Biocompatible PLLA scaffolds have been developed that can be efficiently loaded with MSCs. The scaffold supports chondrogenic differentiation and ECM deposition that improves the mechanics of the scaffold. Although this improvement does not met the expectations of a hyaline-like cartilage ECM, in part due to the lack of a mechanical stimulation, their potential use in the treatment of cartilage pathologies encourages to improve the mechanical component.
Authors: Angel Alberich-Bayarri; David Moratal; Jorge L Escobar Ivirico; José C Rodríguez Hernández; Ana Vallés-Lluch; Luis Martí-Bonmatí; Jorge Más Estellés; Joao F Mano; Manuel Monleón Pradas; José L Gómez Ribelles; Manuel Salmerón-Sánchez Journal: J Biomed Mater Res B Appl Biomater Date: 2009-10 Impact factor: 3.368
Authors: W-J Wan-Ju Li; Richard Tuli; Chukwuka Okafor; Assia Derfoul; K G Keith G Danielson; D J David J Hall; R S Rocky S Tuan Journal: Biomaterials Date: 2005-02 Impact factor: 12.479
Authors: Markus U Wagenhäuser; Matthias F Pietschmann; Denitsa Docheva; Mehmet F Gülecyüz; Volkmar Jansson; Peter E Müller Journal: Knee Surg Sports Traumatol Arthrosc Date: 2014-01-04 Impact factor: 4.342
Authors: Sarah B Peters; Deirdre A Nelson; Hae Ryong Kwon; Matthew Koslow; Kara A DeSantis; Melinda Larsen Journal: Matrix Biol Date: 2015-01-31 Impact factor: 11.583