INTRODUCTION: The purpose of this study was to evaluate the correlations between bone characteristics, orthodontic miniscrew designs, and primary stability. METHODS: Four different miniscrews were placed in pig ribs. The miniscrews were first scanned with a scanning electron microscope to obtain measurable images of their threads. Subsequently, the maximum insertion torque of the screws and the maximum load value in the pullout force tests were measured; furthermore, bone specimen characteristics were analyzed by using cone-beam computed tomography. For each bone sample, the insertion site cortical thickness as well as both cortical and marrow bone density were evaluated. The nonparametric Kendall rank correlation (tau) was used to evaluate the strength of the associations among the characteristics measured. The nonparametric Kruskall-Wallis test was used to evaluate the differences among the groups, and post-hoc comparisons were assessed by using the Nemenyi-Damico-Wolfe-Dunn test. RESULTS: A significant dependence was found between pitch and maximum insertion torque (tau, -0.49). Positive correlations were also found between pullout force and maximum insertion torque (tau, 0.64), cortical thickness (tau, 0.36), and marrow bone density (tau, 0.35). CONCLUSIONS: In this in-vitro experimental study, strong correlations were observed among miniscrew geometry, bone characteristics, and primary stability.
INTRODUCTION: The purpose of this study was to evaluate the correlations between bone characteristics, orthodontic miniscrew designs, and primary stability. METHODS: Four different miniscrews were placed in pig ribs. The miniscrews were first scanned with a scanning electron microscope to obtain measurable images of their threads. Subsequently, the maximum insertion torque of the screws and the maximum load value in the pullout force tests were measured; furthermore, bone specimen characteristics were analyzed by using cone-beam computed tomography. For each bone sample, the insertion site cortical thickness as well as both cortical and marrow bone density were evaluated. The nonparametric Kendall rank correlation (tau) was used to evaluate the strength of the associations among the characteristics measured. The nonparametric Kruskall-Wallis test was used to evaluate the differences among the groups, and post-hoc comparisons were assessed by using the Nemenyi-Damico-Wolfe-Dunn test. RESULTS: A significant dependence was found between pitch and maximum insertion torque (tau, -0.49). Positive correlations were also found between pullout force and maximum insertion torque (tau, 0.64), cortical thickness (tau, 0.36), and marrow bone density (tau, 0.35). CONCLUSIONS: In this in-vitro experimental study, strong correlations were observed among miniscrew geometry, bone characteristics, and primary stability.