Literature DB >> 22820981

Performance of combination drug and hygroscopic excipient submicrometer particles from a softmist inhaler in a characteristic model of the airways.

P Worth Longest1, Geng Tian, Xiang Li, Yoen-Ju Son, Michael Hindle.   

Abstract

Excipient enhanced growth (EEG) of inhaled submicrometer pharmaceutical aerosols is a recently proposed method intended to significantly reduce extrathoracic deposition and improve lung delivery. The objective of this study was to evaluate the size increase of combination drug and hygroscopic excipient particles in a characteristic model of the airways during inhalation using both in vitro experiments and computational fluid dynamic (CFD) simulations. The airway model included a characteristic mouth-throat (MT) and upper tracheobronchial (TB) region through the third bifurcation and was enclosed in a chamber geometry used to simulate the thermodynamic conditions of the lungs. Both in vitro results and CFD simulations were in close agreement and indicated that EEG delivery of combination submicrometer particles could nearly eliminate MT deposition for inhaled pharmaceutical aerosols. Compared with current inhalers, the proposed delivery approach represents a 1-2 order of magnitude reduction in MT deposition. Transient inhalation was found to influence the final size of the aerosol based on changes in residence times and relative humidity values. Aerosol sizes following EEG when exiting the chamber (2.75-4.61 μm) for all cases of initial submicrometer combination particles were equivalent to or larger than many conventional pharmaceutical aerosols that frequently have MMADs in the range of 2-3 μm.

Entities:  

Mesh:

Substances:

Year:  2012        PMID: 22820981      PMCID: PMC3504134          DOI: 10.1007/s10439-012-0616-2

Source DB:  PubMed          Journal:  Ann Biomed Eng        ISSN: 0090-6964            Impact factor:   3.934


  24 in total

1.  Comparing MDI and DPI aerosol deposition using in vitro experiments and a new stochastic individual path (SIP) model of the conducting airways.

Authors:  P Worth Longest; Geng Tian; Ross L Walenga; Michael Hindle
Journal:  Pharm Res       Date:  2012-06       Impact factor: 4.200

Review 2.  Drug delivery devices: issues in drug development.

Authors:  Peter R Byron
Journal:  Proc Am Thorac Soc       Date:  2004

3.  Transport and deposition of micro-aerosols in realistic and simplified models of the oral airway.

Authors:  Jinxiang Xi; P Worth Longest
Journal:  Ann Biomed Eng       Date:  2007-01-20       Impact factor: 3.934

4.  Effects of oral airway geometry characteristics on the diffusional deposition of inhaled nanoparticles.

Authors:  Jinxiang Xi; P Worth Longest
Journal:  J Biomech Eng       Date:  2008-02       Impact factor: 2.097

5.  Respiratory flow phenomena and gravitational deposition in a three-dimensional space-filling model of the pulmonary acinar tree.

Authors:  Josué Sznitman; Thomas Heimsch; Johannes H Wildhaber; Akira Tsuda; Thomas Rösgen
Journal:  J Biomech Eng       Date:  2009-03       Impact factor: 2.097

6.  Evaluation of the Respimat Soft Mist Inhaler using a concurrent CFD and in vitro approach.

Authors:  P Worth Longest; Michael Hindle
Journal:  J Aerosol Med Pulm Drug Deliv       Date:  2009-06       Impact factor: 2.849

Review 7.  Issues in the use of inhaled glucocorticoids. The Asthma Clinical Research Network.

Authors:  A K Kamada; S J Szefler; R J Martin; H A Boushey; V M Chinchilli; J M Drazen; J E Fish; E Israel; S C Lazarus; R F Lemanske
Journal:  Am J Respir Crit Care Med       Date:  1996-06       Impact factor: 21.405

8.  Degree of throat deposition can explain the variability in lung deposition of inhaled drugs.

Authors:  Lars Borgström; Bo Olsson; Lars Thorsson
Journal:  J Aerosol Med       Date:  2006

Review 9.  In silico models of aerosol delivery to the respiratory tract - development and applications.

Authors:  P Worth Longest; Landon T Holbrook
Journal:  Adv Drug Deliv Rev       Date:  2011-05-27       Impact factor: 15.470

10.  Condensational growth of combination drug-excipient submicrometer particles for targeted high-efficiency pulmonary delivery: evaluation of formulation and delivery device.

Authors:  Michael Hindle; P Worth Longest
Journal:  J Pharm Pharmacol       Date:  2012-02-21       Impact factor: 3.765

View more
  30 in total

1.  Factors Determining In Vitro Lung Deposition of Albuterol Aerosol Delivered by Ventolin Metered-Dose Inhaler.

Authors:  Rajoshi Biswas; Nicola A Hanania; Ashutosh Sabharwal
Journal:  J Aerosol Med Pulm Drug Deliv       Date:  2017-02-03       Impact factor: 2.849

Review 2.  Devices for Improved Delivery of Nebulized Pharmaceutical Aerosols to the Lungs.

Authors:  Worth Longest; Benjamin Spence; Michael Hindle
Journal:  J Aerosol Med Pulm Drug Deliv       Date:  2019-07-09       Impact factor: 2.849

3.  Development of a High-Flow Nasal Cannula and Pharmaceutical Aerosol Combination Device.

Authors:  Benjamin M Spence; Worth Longest; Xiangyin Wei; Sneha Dhapare; Michael Hindle
Journal:  J Aerosol Med Pulm Drug Deliv       Date:  2019-03-11       Impact factor: 2.849

4.  Aerosol Drug Delivery During Noninvasive Positive Pressure Ventilation: Effects of Intersubject Variability and Excipient Enhanced Growth.

Authors:  Ross L Walenga; P Worth Longest; Anubhav Kaviratna; Michael Hindle
Journal:  J Aerosol Med Pulm Drug Deliv       Date:  2017-01-11       Impact factor: 2.849

5.  Development of an Inline Dry Powder Inhaler for Oral or Trans-Nasal Aerosol Administration to Children.

Authors:  Dale Farkas; Michael Hindle; Serena Bonasera; Karl Bass; Worth Longest
Journal:  J Aerosol Med Pulm Drug Deliv       Date:  2019-08-29       Impact factor: 2.849

6.  High-efficiency generation and delivery of aerosols through nasal cannula during noninvasive ventilation.

Authors:  P Worth Longest; Ross L Walenga; Yoen-Ju Son; Michael Hindle
Journal:  J Aerosol Med Pulm Drug Deliv       Date:  2012-12-28       Impact factor: 2.849

7.  Targeting aerosol deposition to and within the lung airways using excipient enhanced growth.

Authors:  Geng Tian; P Worth Longest; Xiang Li; Michael Hindle
Journal:  J Aerosol Med Pulm Drug Deliv       Date:  2013-01-03       Impact factor: 2.849

8.  The use of condensational growth methods for efficient drug delivery to the lungs during noninvasive ventilation high flow therapy.

Authors:  Laleh Golshahi; Geng Tian; Mandana Azimi; Yoen-Ju Son; Ross Walenga; P Worth Longest; Michael Hindle
Journal:  Pharm Res       Date:  2013-06-26       Impact factor: 4.200

9.  Targeted Lung Delivery of Nasally Administered Aerosols.

Authors:  Geng Tian; Michael Hindle; P Worth Longest
Journal:  Aerosol Sci Technol       Date:  2014       Impact factor: 2.908

10.  Formulation of High-Performance Dry Powder Aerosols for Pulmonary Protein Delivery.

Authors:  Erin M Wilson; J Christopher Luft; Joseph M DeSimone
Journal:  Pharm Res       Date:  2018-08-23       Impact factor: 4.200

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.