Literature DB >> 2245558

The various stress patterns of press-fit, ingrown, and cemented femoral stems.

R Huiskes1.   

Abstract

Finite-element analysis was used to study the general differences in load-transfer mechanisms and stress patterns of cemented, fully ingrown, proximally ingrown, and smooth press-fitted femoral stems in total hip arthroplasty (THA). Identical stems were used for the noncemented configurations and a similar stem shape for the cemented configurations. In each model, bone properties and loading characteristics were equal. Stem elastic moduli were varied so that the effects of cobalt-chromium-molybdenum (CoCrMo) and titanium as different stem materials could be assessed. The load-transfer mechanism is similar for all bonded configurations but differs dramatically for unbonded stems, e.g., press-fit designs. In the bonded configurations, interface stress concentrations occur on the proximal and distal sides. Stress value depends on stem rigidity, with higher proximal stress occurring in cemented stems and higher distal stress in noncemented stems. In the press-fit stem, the interface stresses are affected more by stem shape as a geometric entity and less by stem rigidity. Considering possible postoperative failure mechanisms, such as interface loosening and cortical bone loss, titanium is expected to produce better results in noncemented stems and CoCrMo in cemented stems. Cortical stress shielding as a qualitative phenomenon is caused by all stems, particularly in the calcar region. Quantitatively, stress-shielding effects differ with each type of fixation used. Stress-shielding effects are severe in fully ingrown stems and milder in cemented stems because of the differences in stem rigidity. The proximally ingrown stem falls between the fully ingrown and cemented stems in regard to stress shielding because stress transfer is more evenly distributed along the stem and concentrated at the lower coated edge. The press-fit stem provokes calcar stress shielding only. In the midstem region the stresses in the cortex are even greater than in the natural case.

Entities:  

Mesh:

Substances:

Year:  1990        PMID: 2245558

Source DB:  PubMed          Journal:  Clin Orthop Relat Res        ISSN: 0009-921X            Impact factor:   4.176


  21 in total

1.  Mechanical evaluation of a bio-active bone cement for total hip arthroplasty.

Authors:  D Ikeda; M Saito; A Murakami; T Shibuya; K Hino; T Nakashima
Journal:  Med Biol Eng Comput       Date:  2000-07       Impact factor: 2.602

2.  Periprosthetic modelling of femoral component fit using computed tomography data for total hip arthroplasty: a feasibility study.

Authors:  D A Hauser-Kara; D L Bartel
Journal:  Med Biol Eng Comput       Date:  2002-11       Impact factor: 2.602

Review 3.  [Failure analysis of total knee replacement. Basics and methodological aspects of the damage analysis].

Authors:  R Bader; W Mittelmeier; E Steinhauser
Journal:  Orthopade       Date:  2006-09       Impact factor: 1.087

4.  Changes of bone mineral density after cementless total hip arthroplasty with two different stems.

Authors:  Keiji Sano; Kouji Ito; Kengo Yamamoto
Journal:  Int Orthop       Date:  2007-01-16       Impact factor: 3.075

5.  Follow-up (6-9 years) results of the uncemented CLS Spotorno stem.

Authors:  J U Bulow; G Scheller; P Arnold; M Synatschke; L Jani
Journal:  Arch Orthop Trauma Surg       Date:  1996       Impact factor: 3.067

6.  Peri-prosthetic bone remodeling and change in bone mineral density in the femur after cemented polished tapered stem implantation.

Authors:  Toshiki Iwase; Daigo Morita; Genta Takemoto; Hiroshi Fujita; Naoyuki Katayama; Hiromi Otsuka
Journal:  Eur J Orthop Surg Traumatol       Date:  2019-03-08

7.  Is there any difference between tapered titanium stems with similar geometry and hydroxyapatite coating?

Authors:  G Cinotti; G Mazzotta; F Romana Ripani; G La Torre; G Giannicola
Journal:  Musculoskelet Surg       Date:  2019-01-08

8.  Bone remodeling and hydroxyapatite resorption in coated primary hip prostheses.

Authors:  Alphons J Tonino; Bart C H van der Wal; Ide C Heyligers; Bernd Grimm
Journal:  Clin Orthop Relat Res       Date:  2008-10-15       Impact factor: 4.176

9.  Late remodeling around a proximally HA-coated tapered titanium femoral component.

Authors:  William N Capello; James A D'Antonio; Rudolph G Geesink; Judy R Feinberg; Marybeth Naughton
Journal:  Clin Orthop Relat Res       Date:  2008-10-11       Impact factor: 4.176

10.  Five-year DEXA study of 88 hips with cemented femoral stem.

Authors:  Georgios Digas; Johan Kärrholm
Journal:  Int Orthop       Date:  2008-12-03       Impact factor: 3.075

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.