Literature DB >> 22102943

A computed tomography-based anatomic comparison of three different types of c7 posterior fixation techniques : pedicle, intralaminar, and lateral mass screws.

Woo Young Jang1, Il Sup Kim, Ho Jin Lee, Jae Hoon Sung, Sang Won Lee, Jae Taek Hong.   

Abstract

OBJECTIVE: The intralaminar screw (ILS) fixation technique offers an alternative to pedicle screw (PS) and lateral mass screw (LMS) fixation in the C7 spine. Although cadaveric studies have described the anatomy of the pedicles, laminae, and lateral masses at C7, 3-dimensional computed tomography (CT) imaging is the modality of choice for pre-surgical planning. In this study, the goal was to determine the anatomical parameter and optimal screw trajectory for ILS placement at C7, and to compare this information to PS and LMS placement in the C7 spine as determined by CT evaluation.
METHODS: A total of 120 patients (60 men and 60 women) with an average age of 51.7±13.6 years were selected by retrospective review of a trauma registry database over a 2-year period. Patients were included in the study if they were older than 15 years of age, had standardized axial bone-window CT imaging at C7, and had no evidence of spinal trauma. For each lamina and pedicle, width (outer cortical and inner cancellous), maximal screw length, and optimal screw trajectory were measured, and the maximal screw length of the lateral mass were measured using m-view 5.4 software. Statistical analysis was performed using Student's t-test.
RESULTS: At C7, the maximal PS length was significantly greater than the ILS and LMS length (PS, 33.9±3.1 mm; ILS, 30.8±3.1 mm; LMS, 10.6±1.3; p<0.01). When the outer cortical and inner cancellous width was compared between the pedicle and lamina, the mean pedicle outer cortical width at C7 was wider than the lamina by an average of 0.6 mm (pedicle, 6.8±1.2 mm; lamina, 6.2±1.2 mm; p<0.01). At C7, 95.8% of the laminae measured accepted a 4.0-mm screw with a 1.0 mm of clearance, compared with 99.2% of pedicle. Of the laminae measured, 99.2% accepted a 3.5-mm screw with a 1.0 mm clearance, compared with 100% of the pedicle. When the outer cortical and inner cancellous height was compared between pedicle and lamina, the mean lamina outer cortical height at C7 was wider than the pedicle by an average of 9.9 mm (lamina, 18.6±2.0 mm; pedicle, 8.7±1.3 mm; p<0.01). The ideal screw trajectory at C7 was also measured (47.8±4.8° for ILS and 35.1±8.1° for PS).
CONCLUSION: Although pedicle screw fixation is the most ideal instrumentation method for C7 fixation with respect to length and cortical diameter, anatomical aspect of C7 lamina is affordable to place screw. Therefore, the C7 intralaminar screw could be an alternative fixation technique with few anatomic limitations in the cases when C7 pedicle screw fixation is not favorable. However, anatomical variations in the length and width must be considered when placing an intralaminar or pedicle screw at C7.

Entities:  

Keywords:  Anatomic study; Intralaminar screw; Lateral mass screw; Pedicle screw

Year:  2011        PMID: 22102943      PMCID: PMC3218172          DOI: 10.3340/jkns.2011.50.3.166

Source DB:  PubMed          Journal:  J Korean Neurosurg Soc        ISSN: 1225-8245


  14 in total

1.  Anatomic consideration for standard and modified techniques of cervical lateral mass screw placement.

Authors:  Andrew A Merola; B Andrew Castro; Paul R Alongi; Sameer Mathur; Mario Brkaric; Franco Vigna; Joseph P Riina; John Gorup; Thomas R Haher
Journal:  Spine J       Date:  2002 Nov-Dec       Impact factor: 4.166

2.  Pedicle screw fixation of the C7 vertebra using an anteroposterior fluoroscopic imaging technique.

Authors:  Shaunak Desai; Anil Sethi; Christopher C Ninh; Stephen Bartol; Rahul Vaidya
Journal:  Eur Spine J       Date:  2010-07-17       Impact factor: 3.134

3.  Biomechanics of stabilization after cervicothoracic compression-flexion injury.

Authors:  Christopher P Ames; M Hakan Bozkus; Robert H Chamberlain; Frank L Acosta; Stephen M Papadopoulos; Volker K H Sonntag; Neil R Crawford
Journal:  Spine (Phila Pa 1976)       Date:  2005-07-01       Impact factor: 3.468

4.  Anatomic considerations for the placement of C2 laminar screws.

Authors:  Ezequiel H Cassinelli; Michael Lee; Anthony Skalak; Nicholas U Ahn; Neill M Wright
Journal:  Spine (Phila Pa 1976)       Date:  2006-11-15       Impact factor: 3.468

5.  Using lamina screws as a salvage technique at C-7: computed tomography and biomechanical analysis using cadaveric vertebrae. Laboratory investigation.

Authors:  Mario J Cardoso; Anton E Dmitriev; Melvin D Helgeson; Frederick Stephens; Victoria Campbell; Ronald A Lehman; Patrick Cooper; Michael K Rosner
Journal:  J Neurosurg Spine       Date:  2009-07

6.  Correlation between computed tomography measurements and direct anatomic measurements of the axis for consideration of C2 laminar screw placement.

Authors:  Clayton L Dean; Michael J Lee; Mark Robbin; Ezequiel H Cassinelli
Journal:  Spine J       Date:  2008-08-30       Impact factor: 4.166

7.  Biomechanical evaluation of posterior cervical stabilization after a wide laminectomy.

Authors:  M R Grubb; B L Currier; J Stone; K E Warden; K N An
Journal:  Spine (Phila Pa 1976)       Date:  1997-09-01       Impact factor: 3.468

8.  Cervical pedicle screws versus lateral mass screws. Anatomic feasibility and biomechanical comparison.

Authors:  E L Jones; J G Heller; D H Silcox; W C Hutton
Journal:  Spine (Phila Pa 1976)       Date:  1997-05-01       Impact factor: 3.468

9.  Anatomical considerations for cervical pedicle screw insertion: the use of multiplanar computerized tomography measurements in 122 consecutive clinical cases.

Authors:  Adebukola Onibokun; Larry T Khoo; Simona Bistazzoni; Nan Fu Chen; Marco Sassi
Journal:  Spine J       Date:  2009-09       Impact factor: 4.166

10.  Significance of laminar screw fixation in the subaxial cervical spine.

Authors:  Jae Taek Hong; Jae Hoon Sung; Byung Chul Son; Sang Won Lee; Chun Kun Park
Journal:  Spine (Phila Pa 1976)       Date:  2008-07-15       Impact factor: 3.468

View more
  7 in total

1.  Cervical pedicle screw insertion using the technique with direct exposure of the pedicle by laminoforaminotomy.

Authors:  Dae-Jean Jo; Eun-Min Seo; Ki-Tack Kim; Sung-Min Kim; Sang-Hun Lee
Journal:  J Korean Neurosurg Soc       Date:  2012-11-30

2.  C7 intra-laminar screws for complex cervicothoracic spine surgery-a case series.

Authors:  Peter John Wilson; Michael Derrick Selby
Journal:  J Spine Surg       Date:  2017-12

3.  Radiological anatomy of the C7 vertebra: Clinical implications in spine surgery.

Authors:  Fatih Keskin; Fatih Erdi; Alaaddin Nayman; Ozan Babaoglu; Kalkan Erdal; Ali Fahir Ozer
Journal:  J Craniovertebr Junction Spine       Date:  2015 Jan-Mar

4.  Feasibility of translaminar screw placement in Korean population: morphometric analysis of cervical spine.

Authors:  Gyu Yeul Ji; Chang Hyun Oh; Sang Hyuk Park; Ferry Kurniawan; Junho Lee; Jae Kyun Jeon; Dong Ah Shin; Keung Nyun Kim
Journal:  Yonsei Med J       Date:  2015-01       Impact factor: 2.759

5.  Quantitative Anatomy of C7 Vertebra in Southern Chinese for Insertion of Lateral Mass Screws and Pedicle Screws.

Authors:  Michael Siu Hei Tse; Chi Hin Chan; Kam Kwong Wong; Wing Cheung Wong
Journal:  Asian Spine J       Date:  2016-08-16

6.  Comparison of Three Different Options for C7 Posterior Vertebral Anchor in the Indian Population-Lateral Mass, Pedicle, and Lamina: A Computed Tomography-Based Morphometric Analysis.

Authors:  Vibhu Krishnan Viswanathan; Surabhi Subramanian; Sushma Viswanathan
Journal:  Asian Spine J       Date:  2018-07-27

7.  Feasibility of bilateral crossing c7 intralaminar screws: a cadaveric study.

Authors:  Tae-Hyun Baek; Ilsup Kim; Jae-Taek Hong; Daniel H Kim; Dongsuk Shin; Sang-Won Lee
Journal:  J Korean Neurosurg Soc       Date:  2014-07-31
  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.