| Literature DB >> 21406432 |
Régis Héliou1, Lysanne Normandeau, Gilles Beaudoin.
Abstract
Dose indicators such as the computed tomography dose index (CTDI) and dose-length product (DLP) were gathered for all routine abdomen-pelvis, chest and head examinations performed on all computed tomography (CT) scanners at a University Health Center (UHC) in Canada. These indicators were analysed and compared with the range of diagnostic reference levels (DRLs) suggested by Health Canada and with DRLs in other countries. Mean DLP values varied from one scanner to another, but mean values at the UHC (750 mGy cm(-1) for abdomen-pelvis CT, 349 mGy cm(-1) for chest CT and 1181 mGy cm(-1) for head CT) were all below the upper limit of the range of DRLs suggested by Health Canada. Local DRLs at the UHC were set to 810 mGy cm(-1) for abdomen-pelvis CT, 345 mGy cm(-1) for chest CT and 1205 mGy cm(-1) for head CT. Results, however, show the need for protocols revisions, since some scanners exhibit mean DLP values slightly below or above the upper limit of the range of DRLs suggested by Health Canada.Entities:
Mesh:
Year: 2011 PMID: 21406432 DOI: 10.1093/rpd/ncr024
Source DB: PubMed Journal: Radiat Prot Dosimetry ISSN: 0144-8420 Impact factor: 0.972