Literature DB >> 21250642

Nitric oxide-releasing electrospun polymer microfibers.

Peter N Coneski1, Jessica A Nash, Mark H Schoenfisch.   

Abstract

The preparation of electrospun polymer microfibers with nitric oxide (NO)-release capabilities is described. Polymer solutions containing disodium 1-[2-(carboxylato)pyrrolidin-1-yl]diazen-1-ium-1,2-diolate (PROLI/NO), a low-molecular-weight NO donor, were electrospun to generate fibers ranging from 100-3000 nm in diameter capable of releasing NO upon immersion in aqueous solutions under physiological conditions (pH 7.4, 37 °C), with kinetics depending on polymer composition and fiber diameter. The NO release half-life for PROLI/NO-doped electrospun fibers was 2-200 times longer than that of PROLI/NO alone. The influence of polymer concentration, applied voltage, capillary diameter, solution conductivity, flow rate, and additives on fiber properties are reported and discussed with respect to potential applications.

Entities:  

Mesh：

Substances：

Year:  2011        PMID： 21250642      PMCID： PMC3045468          DOI： 10.1021/am101010e

Source DB:  PubMed          Journal:  ACS Appl Mater Interfaces        ISSN： 1944-8244            Impact factor:   9.229


  16 in total

Review 1.  Nitric oxide donors: chemical activities and biological applications.

Authors:  Peng George Wang; Ming Xian; Xiaoping Tang; Xuejun Wu; Zhong Wen; Tingwei Cai; Adam J Janczuk
Journal:  Chem Rev       Date:  2002-04       Impact factor: 60.622

Review 2.  NO and angiogenesis.

Authors:  John P Cooke
Journal:  Atheroscler Suppl       Date:  2003-12       Impact factor: 3.235

Review 3.  Electrospun materials as potential platforms for bone tissue engineering.

Authors:  Jun-Hyeog Jang; Oscar Castano; Hae-Won Kim
Journal:  Adv Drug Deliv Rev       Date:  2009-07-29       Impact factor: 15.470

Review 4.  Electrospinning of collagen/biopolymers for regenerative medicine and cardiovascular tissue engineering.

Authors:  Scott A Sell; Michael J McClure; Koyal Garg; Patricia S Wolfe; Gary L Bowlin
Journal:  Adv Drug Deliv Rev       Date:  2009-08-03       Impact factor: 15.470

5.  A review on electrospinning design and nanofibre assemblies.

Authors:  W E Teo; S Ramakrishna
Journal:  Nanotechnology       Date:  2006-06-30       Impact factor: 3.874

6.  Endothelium-derived relaxing factor produced and released from artery and vein is nitric oxide.

Authors:  L J Ignarro; G M Buga; K S Wood; R E Byrns; G Chaudhuri
Journal:  Proc Natl Acad Sci U S A       Date:  1987-12       Impact factor: 11.205

Review 7.  Role of nitric oxide in wound repair.

Authors:  Maria B Witte; Adrian Barbul
Journal:  Am J Surg       Date:  2002-04       Impact factor: 2.565

Review 8.  Bench-to-bedside review: nitric oxide in critical illness--update 2008.

Authors:  Steven M Hollenberg; Ismail Cinel
Journal:  Crit Care       Date:  2009-07-16       Impact factor: 9.097

9.  Electrospun composite poly(L-lactic acid)/tricalcium phosphate scaffolds induce proliferation and osteogenic differentiation of human adipose-derived stem cells.

Authors:  S D McCullen; Y Zhu; S H Bernacki; R J Narayan; B Pourdeyhimi; R E Gorga; E G Loboa
Journal:  Biomed Mater       Date:  2009-04-24       Impact factor: 3.715

10.  Nitric oxide releasing polyurethanes with covalently linked diazeniumdiolated secondary amines.

Authors:  Melissa M Reynolds; Joseph A Hrabie; Bong K Oh; Jeffrey K Politis; Michael L Citro; Larry K Keefer; Mark E Meyerhoff
Journal:  Biomacromolecules       Date:  2006-03       Impact factor: 6.988
View more
  14 in total

1.  Glucose sensor membranes for mitigating the foreign body response.

Authors:  Ahyeon Koh; Scott P Nichols; Mark H Schoenfisch
Journal:  J Diabetes Sci Technol       Date:  2011-09-01

Review 2.  Local delivery of nitric oxide: targeted delivery of therapeutics to bone and connective tissues.

Authors:  Scott P Nichols; Wesley L Storm; Ahyeon Koh; Mark H Schoenfisch
Journal:  Adv Drug Deliv Rev       Date:  2012-03-10       Impact factor: 15.470

3.  Nitric oxide-releasing xerogels synthesized from N-diazeniumdiolate-modified silane precursors.

Authors:  Wesley L Storm; Mark H Schoenfisch
Journal:  ACS Appl Mater Interfaces       Date:  2013-05-20       Impact factor: 9.229

4.  Examination of bacterial resistance to exogenous nitric oxide.

Authors:  Benjamin J Privett; Angela D Broadnax; Susanne J Bauman; Daniel A Riccio; Mark H Schoenfisch
Journal:  Nitric Oxide       Date:  2012-02-18       Impact factor: 4.427

5.  Fabrication of nitric oxide-releasing polyurethane glucose sensor membranes.

Authors:  Ahyeon Koh; Daniel A Riccio; Bin Sun; Alexis W Carpenter; Scott P Nichols; Mark H Schoenfisch
Journal:  Biosens Bioelectron       Date:  2011-06-17       Impact factor: 10.618

6.  Active Release of Nitric Oxide-Releasing Dendrimers from Electrospun Polyurethane Fibers.

Authors:  Brittany V Worley; Robert J Soto; Paige C Kinsley; Mark H Schoenfisch
Journal:  ACS Biomater Sci Eng       Date:  2016-02-29

Review 7.  Biocompatible materials for continuous glucose monitoring devices.

Authors:  Scott P Nichols; Ahyeon Koh; Wesley L Storm; Jae Ho Shin; Mark H Schoenfisch
Journal:  Chem Rev       Date:  2013-02-07       Impact factor: 60.622

Review 8.  Nitric Oxide Therapy for Diabetic Wound Healing.

Authors:  Maggie J Malone-Povolny; Sara E Maloney; Mark H Schoenfisch
Journal:  Adv Healthc Mater       Date:  2019-01-15       Impact factor: 9.933

9.  Fabrication of nitric oxide-releasing porous polyurethane membranes-coated needle-type implantable glucose biosensors.

Authors:  Ahyeon Koh; Yuan Lu; Mark H Schoenfisch
Journal:  Anal Chem       Date:  2013-10-08       Impact factor: 6.986

10.  Nitric oxide-releasing silica nanoparticle-doped polyurethane electrospun fibers.

Authors:  Ahyeon Koh; Alexis W Carpenter; Danielle L Slomberg; Mark H Schoenfisch
Journal:  ACS Appl Mater Interfaces       Date:  2013-08-05       Impact factor: 9.229
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.