Literature DB >> 20933489

Clinical marginal and internal gaps of zirconia all-ceramic crowns.

Yuji Kokubo1, Mitsuyoshi Tsumita, Takamitsu Kano, Satoe Sakurai, Shunji Fukushima.   

Abstract

PURPOSE: Marginal and internal gaps of NobelProcera crown zirconia were clinically evaluated using silicone materials.
MATERIALS AND METHODS: Ninety-one crowns were examined before final cementation, and white and black silicone materials were used to record the marginal and internal fit. The silicone materials were sectioned bucco-lingually and mesio-distally, and the thickness of the silicone layers was measured using a microscope. Sixteen reference points were measured on each specimen, and mean marginal and internal gaps were obtained. Mean marginal gaps among anterior, premolar, and molar tooth groups, in addition to mean gaps at the reference points within the groups, were compared using two-way ANOVA and Games-Howell analysis.
RESULTS: The marginal mean values were the smallest among all tooth groups, and the largest were at the rounded shoulders. There were no significant differences in the mean marginal gaps among the three tooth groups, while there were significant differences in the mean marginal and internal gaps of each tooth group.
CONCLUSIONS: The mean marginal gap of the NobelProcera crown zirconia was 44.2 μm, which is within clinically accepted standards.
Copyright © 2010 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2010        PMID: 20933489     DOI: 10.1016/j.jpor.2010.09.001

Source DB:  PubMed          Journal:  J Prosthodont Res        ISSN: 1883-1958            Impact factor:   4.642


  12 in total

1.  Accuracy of Digital Impressions and Fitness of Single Crowns Based on Digital Impressions.

Authors:  Xin Yang; Pin Lv; Yihong Liu; Wenjie Si; Hailan Feng
Journal:  Materials (Basel)       Date:  2015-06-29       Impact factor: 3.623

2.  Evaluation of marginal and internal gaps of Ni-Cr and Co-Cr alloy copings manufactured by microstereolithography.

Authors:  Dong-Yeon Kim; Chong-Myeong Kim; Ji-Hwan Kim; Hae-Young Kim; Woong-Chul Kim
Journal:  J Adv Prosthodont       Date:  2017-06-19       Impact factor: 1.904

3.  An Evaluation of the Gap Sizes of 3-Unit Fixed Dental Prostheses Milled from Sintering Metal Blocks.

Authors:  Jae-Kwan Jung
Journal:  Biomed Res Int       Date:  2017-01-29       Impact factor: 3.411

4.  Evaluation of marginal discrepancy in metal frameworks fabricated by sintering-based computer-aided manufacturing methods.

Authors:  Necati Kaleli; Çağrı Ural; Yeşim Ölçer Us
Journal:  J Adv Prosthodont       Date:  2020-06-18       Impact factor: 1.904

5.  A comparative study of the accuracy of five CAD-CAM systems.

Authors:  Smaranda Buduru; Bogdan Culic; Daniel Talmaceanu; Adorjan Pal
Journal:  Med Pharm Rep       Date:  2019-04-25

6.  Reproducibility of different coping arrangements fabricated by dental micro-stereolithography: Evaluation of marginal and internal gaps in metal copings.

Authors:  Dong-Yeon Kim; Il-Do Jeong; Ji-Hwan Kim; Hae-Young Kim; Woong-Chul Kim
Journal:  J Dent Sci       Date:  2017-11-20       Impact factor: 2.080

7.  Marginal and Internal Precision of Zirconia Four-Unit Fixed Partial Denture Frameworks Produced Using Four Milling Systems.

Authors:  Karl Martin Lehmann; Michael Weyhrauch; Monika Bjelopavlovic; Herbert Scheller; Henning Staedt; Peter Ottl; Peer W Kaemmerer; Stefan Wentaschek
Journal:  Materials (Basel)       Date:  2021-05-19       Impact factor: 3.623

8.  The marginal and internal discrepancy of zirconia coping milled by two computer-aided design-computer-aided manufacturing systems.

Authors:  Somchai Urapepon
Journal:  J Indian Prosthodont Soc       Date:  2021 Apr-Jun

9.  Reliability of light microscopy and a computer-assisted replica measurement technique for evaluating the fit of dental copings.

Authors:  Heike Rudolph; Silke Ostertag; Michael Ostertag; Michael H Walter; Ralph Gunnar Luthardt; Katharina Kuhn
Journal:  J Appl Oral Sci       Date:  2018-02-01       Impact factor: 2.698

10.  Development of 3D Slurry Printing Technology with Submersion-Light Apparatus in Dental Application.

Authors:  Cho-Pei Jiang; M Fahrur Rozy Hentihu; Yung-Chang Cheng; Tzu-Yi Lei; Richard Lin; Zhangwei Chen
Journal:  Materials (Basel)       Date:  2021-12-19       Impact factor: 3.623

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.