Literature DB >> 2090814

Polished versus autoglazed dental porcelain.

R L Raimondo1, J T Richardson, B Wiedner.   

Abstract

This study compared the finishes on dental porcelain polished with four different polishing paste systems with oven reglazing and with a porcelain adjustment kit without a polishing paste. The polished/reglazed samples were rated according to quality of finish by independent observers and by scanning electron microscopy. On the basis of visual examination, two of the polishing paste systems tested were found to produce a surface equal to or better than oven glazing. On the basis of SEM examination, oven glazing was found to produce a better surface than the other polishing methods. Not all porcelain polishing systems produce a surface comparable to oven-glazed porcelain, and porcelain polishing systems should be chosen carefully.

Mesh:

Substances:

Year:  1990        PMID: 2090814     DOI: 10.1016/0022-3913(90)90126-w

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN: 0022-3913            Impact factor:   3.426


  12 in total

1.  Effect of surface topography on the color of dental porcelain.

Authors:  Il-Jang Kim; Yong-Keun Lee; Bum-Soon Lim; Cheol-We Kim
Journal:  J Mater Sci Mater Med       Date:  2003-05       Impact factor: 3.896

2.  An in vitro study to identify a ceramic polishing protocol effecting smoothness superior to glazed surface.

Authors:  Noxy George Manjuran; T Sreelal
Journal:  J Indian Prosthodont Soc       Date:  2013-08-22

3.  An in vitro investigation to compare the surface roughness of auto glazed, reglazed and chair side polished surfaces of Ivoclar and Vita feldspathic porcelain.

Authors:  Sumit Sethi; Dilip Kakade; Shantanu Jambhekar; Vinay Jain
Journal:  J Indian Prosthodont Soc       Date:  2012-12-14

4.  Evaluation of the surface roughness in dental ceramics submitted to different finishing and polishing methods.

Authors:  Alex C Vieira; Mario C S Oliveira; Emilena M C X Lima; Isabel Rambob; Mariana Leite
Journal:  J Indian Prosthodont Soc       Date:  2013-03-08

5.  Effect finishing and polishing procedures on the surface roughness of IPS Empress 2 ceramic.

Authors:  Juliana Maria Capelozza Boaventura; Rodrigo Nishida; André Afif Elossais; Darlon Martins Lima; José Mauricio Santos Nunes Reis; Edson Alves Campos; Marcelo Ferrarezi de Andrade
Journal:  Acta Odontol Scand       Date:  2012-06-25       Impact factor: 2.331

6.  The effects of different polishing techniques on the staining resistance of CAD/CAM resin-ceramics.

Authors:  Omer Sagsoz; Tevfik Demirci; Gamze Demirci; Nurdan Polat Sagsoz; Mehmet Yildiz
Journal:  J Adv Prosthodont       Date:  2016-12-15       Impact factor: 1.904

7.  Effects of different polishing techniques on the surface roughness of dental porcelains.

Authors:  Işil Sarikaya; Ahmet Umut Güler
Journal:  J Appl Oral Sci       Date:  2010 Jan-Feb       Impact factor: 2.698

8.  An In vitro Evaluation to Compare the Surface Roughness of Glazed, Reglazed and Chair Side Polished Surfaces of Dental Porcelain.

Authors:  Varsha Rani; Sanjeev Mittal; Urvashi Sukhija
Journal:  Contemp Clin Dent       Date:  2021-06-14

9.  Effect of two different finishing systems on surface roughness of feldspathic and fluorapatite porcelains in ceramo-metal restorations: Comparative in vitro study.

Authors:  Cherry Anmol; Sumeet Soni
Journal:  J Int Soc Prev Community Dent       Date:  2014-01

10.  Surface roughness of zirconia for full-contour crowns after clinically simulated grinding and polishing.

Authors:  Rim Hmaidouch; Wolf-Dieter Müller; Hans-Christoph Lauer; Paul Weigl
Journal:  Int J Oral Sci       Date:  2014-07-25       Impact factor: 6.344

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.