Literature DB >> 20875532

A technique to improve the esthetic aspects of CAD/CAM composite resin restorations.

Giovanni Tommaso Rocca1, François Bonnafous, Nicolas Rizcalla, Ivo Krejci.   

Abstract

Bonded indirect computer-aided design/computer-aided manufacturing (CAD/CAM) restorations are increasingly gaining popularity for the restoration of large defects in posterior teeth. In addition to ceramic blocks, composite resin blocks have been developed. Composite resins blocks may have improved mechanical properties, but have poor esthetics. Thus, an esthetic modification of the restoration after machine milling may be necessary. A step-by-step procedure for the external esthetic layering of a composite CAD/CAM restoration is described. This technique can be used to repair or modify any composite resin restoration.
Copyright © 2010 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Entities:  

Mesh：

Substances：

Year:  2010        PMID： 20875532     DOI： 10.1016/S0022-3913(10)60138-2

Source DB:  PubMed          Journal:  J Prosthet Dent        ISSN： 0022-3913            Impact factor:   3.426


  13 in total

1.  Load-bearing capacity of CAD/CAM milled polymeric three-unit fixed dental prostheses: effect of aging regimens.

Authors:  Bogna Stawarczyk; Andreas Ender; Albert Trottmann; Mutlu Özcan; Jens Fischer; Christoph H F Hämmerle
Journal:  Clin Oral Investig       Date:  2012-01-03       Impact factor: 3.573

2.  Effect of surface finishing treatments on the color stability of CAD/CAM materials.

Authors:  Funda Ozen; Nermin Demirkol; Ozge Parlar Oz
Journal:  J Adv Prosthodont       Date:  2020-06-18       Impact factor: 1.904

3.  The effect of different pretreatment methods of PMMA-based crowns on the long-term tensile bond strength to dentin abutments.

Authors:  Christine Keul; Daliah Kohen; Marlis Eichberger; Malgorzata Roos; Wolfgang Gernet; Bogna Stawarczyk
Journal:  Clin Oral Investig       Date:  2014-03-02       Impact factor: 3.573

4.  Tensile bond strength of resin composite repair in vitro using different surface preparation conditionings to an aged CAD/CAM resin nanoceramic.

Authors:  Bogna Stawarczyk; Andreas Krawczuk; Nicoleta Ilie
Journal:  Clin Oral Investig       Date:  2014-06-15       Impact factor: 3.573

5.  Influence of proximal box elevation on the marginal quality and fracture behavior of root-filled molars restored with CAD/CAM ceramic or composite onlays.

Authors:  Irina Ilgenstein; Nicola U Zitzmann; Julia Bühler; Florian J Wegehaupt; Thomas Attin; Roland Weiger; Gabriel Krastl
Journal:  Clin Oral Investig       Date:  2014-09-25       Impact factor: 3.573

6.  Marginal and internal fit of nano-composite CAD/CAM restorations.

Authors:  So-Hyun Park; Yeon-Jee Yoo; Yoo-Jin Shin; Byeong-Hoon Cho; Seung-Ho Baek
Journal:  Restor Dent Endod       Date:  2016-01-19

7.  Evaluation of the flexural strength and microhardness of provisional crown and bridge materials fabricated by different methods.

Authors:  Shruti Digholkar; V N V Madhav; Jayant Palaskar
Journal:  J Indian Prosthodont Soc       Date:  2016 Oct-Dec

Review 8.  Dental biomaterials for chairside CAD/CAM: State of the art.

Authors:  Hugo Lambert; Jean-Cédric Durand; Bruno Jacquot; Michel Fages
Journal:  J Adv Prosthodont       Date:  2017-12-14       Impact factor: 1.904

9.  Resin Nanoceramic CAD/CAM Restoration of the Primary Molar: 3-Year Follow-Up Study.

Authors:  Akif Demirel; Tuğba Bezgin; Funda Akaltan; Şaziye Sarı
Journal:  Case Rep Dent       Date:  2017-06-20

10.  Effects of air abrasion with alumina or glass beads on surface characteristics of CAD/CAM composite materials and the bond strength of resin cements.

Authors:  Arao Nobuaki; Yoshida Keiichi; Sawase Takashi
Journal:  J Appl Oral Sci       Date:  2015 Nov-Dec       Impact factor: 2.698
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.