BACKGROUND, AIM, AND SCOPE: In the 50 years or so that polychlorinated biphenyls (PCBs) were manufactured in the USA and elsewhere, they were widely used in numerous applications because of their desirable properties. The purpose of this paper is to review and summarize in one place the factual information about the uses of PCBs, as well as to correct some misconceptions that have arisen over the years. The focus is on applications in the USA for which there is ample documentation. However, use patterns were probably similar worldwide. MATERIALS AND METHODS: Review. RESULTS: PCBs were used primarily as electrical insulating fluids in capacitors and transformers and also as hydraulic, heat transfer, and lubricating fluids. PCBs were blended with other chemicals as plasticizers and fire retardants and used in a range of products including caulks, adhesives, plastics, and carbonless copy paper. In the USA, PCBs were manufactured from 1929 through mid-1977, although many products remained in service for decades after the manufacture of PCBs was terminated. This article reviews the historic uses of PCBs in the USA and discusses, where possible, the relative sales volumes. Especially with smaller volume, military, and third-party uses, documenting a use and/or differentiating between a commercial use and an experimental test batch is not possible. DISCUSSION: A major contribution of this paper is to differentiate reported commercial applications of PCBs that can be documented from those which cannot. Undocumented uses may include actual minor uses as well as reported applications that are unlikely ever to have been commercialized.
BACKGROUND, AIM, AND SCOPE: In the 50 years or so that polychlorinated biphenyls (PCBs) were manufactured in the USA and elsewhere, they were widely used in numerous applications because of their desirable properties. The purpose of this paper is to review and summarize in one place the factual information about the uses of PCBs, as well as to correct some misconceptions that have arisen over the years. The focus is on applications in the USA for which there is ample documentation. However, use patterns were probably similar worldwide. MATERIALS AND METHODS: Review. RESULTS:PCBs were used primarily as electrical insulating fluids in capacitors and transformers and also as hydraulic, heat transfer, and lubricating fluids. PCBs were blended with other chemicals as plasticizers and fire retardants and used in a range of products including caulks, adhesives, plastics, and carbonless copy paper. In the USA, PCBs were manufactured from 1929 through mid-1977, although many products remained in service for decades after the manufacture of PCBs was terminated. This article reviews the historic uses of PCBs in the USA and discusses, where possible, the relative sales volumes. Especially with smaller volume, military, and third-party uses, documenting a use and/or differentiating between a commercial use and an experimental test batch is not possible. DISCUSSION: A major contribution of this paper is to differentiate reported commercial applications of PCBs that can be documented from those which cannot. Undocumented uses may include actual minor uses as well as reported applications that are unlikely ever to have been commercialized.
Authors: Martin Van den Berg; Linda S Birnbaum; Michael Denison; Mike De Vito; William Farland; Mark Feeley; Heidelore Fiedler; Helen Hakansson; Annika Hanberg; Laurie Haws; Martin Rose; Stephen Safe; Dieter Schrenk; Chiharu Tohyama; Angelika Tritscher; Jouko Tuomisto; Mats Tysklind; Nigel Walker; Richard E Peterson Journal: Toxicol Sci Date: 2006-07-07 Impact factor: 4.849
Authors: Robert F Herrick; Michael D McClean; John D Meeker; Lisa K Baxter; George A Weymouth Journal: Environ Health Perspect Date: 2004-07 Impact factor: 9.031
Authors: Jonathan N Hogarh; Nobuyasu Seike; Yuso Kobara; Derick Carboo; Julius N Fobil; Shigeki Masunaga Journal: Environ Sci Pollut Res Int Date: 2018-04-29 Impact factor: 4.223
Authors: Victoria S Parker; Edwin J Squirewell; Hans-Joachim Lehmler; Larry W Robertson; Michael W Duffel Journal: Environ Toxicol Pharmacol Date: 2018-02-03 Impact factor: 4.860
Authors: Fabian A Grimm; Hans-Joachim Lehmler; Wen Xin Koh; Jeanne DeWall; Lynn M Teesch; Keri C Hornbuckle; Peter S Thorne; Larry W Robertson; Michael W Duffel Journal: Environ Int Date: 2016-11-03 Impact factor: 9.621
Authors: Carolyn R Hofe; Limin Feng; Dominique Zephyr; Arnold J Stromberg; Bernhard Hennig; Lisa M Gaetke Journal: Nutr Res Date: 2014-02-10 Impact factor: 3.315