Literature DB >> 20809170

Modular femoral sleeve and stem implant provides long-term total hip survivorship.

David Le1, Karen Smith, Dylan Tanzer, Michael Tanzer.   

Abstract

BACKGROUND: A femoral implant with a modular sleeve and stem has been designed to allow independent and complete metaphyseal-diaphyseal fit and fill as well as independent rotation to accommodate anteversion at the time of THA. QUESTIONS/PURPOSES: In a prospective study we asked whether such a modular femoral sleeve and stem implant used during THA could provide (1) high long-term survivorship; (2) radiographically stable implants without radiolucencies, stress shielding, or osteolysis; and (3) high clinical scores in patients 15 to 20 years after a primary THA. PATIENTS AND METHODS: We prospectively evaluated 31 hips that underwent a primary THA using a modular femoral component for clinical outcome (Harris hip score) and radiographic outcome (implant stability, femoral loosening, osteolysis and stress shielding) at a minimum followup of 15 years (mean, 17 years; range, 15-20.2 years).
RESULTS: There were no femoral revisions for aseptic loosening; all hips had radiographic evidence of bone ingrowth. Two well-ingrown components were revised for late hematogenous infection. Some degree of proximal femoral disuse atrophy from stress shielding occurred in 23 hips (74%) but was nonprogressive and did not result in any failures or complications. Femoral osteolysis occurred in 18 hips (58%), but we cannot definitively determine whether or not the modular junction contributed to this.
CONCLUSIONS: These data suggest this modular femoral stem can provide long-term survivorship with no cases of aseptic loosening at 15 to 20 years after primary THA. However, it may be prudent when using this femoral stem to consider an articulation with an alternative bearing or, if the modularity is not needed to address femoral anteversion and metaphyseal-diaphyseal mismatch, to consider a nonmodular femoral stem. LEVEL OF EVIDENCE: Level III, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Entities:  

Mesh:

Year:  2011        PMID: 20809170      PMCID: PMC3018229          DOI: 10.1007/s11999-010-1524-0

Source DB:  PubMed          Journal:  Clin Orthop Relat Res        ISSN: 0009-921X            Impact factor:   4.176


  16 in total

1.  Bone densitometry: influence of prosthetic design and hydroxyapatite coating on regional adaptive bone remodelling.

Authors:  L Rosenthall; J D Bobyn; M Tanzer
Journal:  Int Orthop       Date:  1999       Impact factor: 3.075

2.  Primary cementless total hip arthroplasty using a modular femoral component: a minimum 6-year follow-up.

Authors:  M Tanzer; S Chan; C E Brooks; J D Bobyn
Journal:  J Arthroplasty       Date:  2001-12       Impact factor: 4.757

3.  Dislocation of an S-ROM total hip arthroplasty secondary to traumatic femoral stem dissociation from the metaphyseal sleeve.

Authors:  David W Fabi; Wayne M Goldstein; Alexander C Gordon
Journal:  J Arthroplasty       Date:  2008-06-04       Impact factor: 4.757

4.  S-ROM hip prosthesis: 10- to 14-year results.

Authors:  Damon C Adamany; Joel R Politi; Walter H Hauser
Journal:  Orthopedics       Date:  2008-03       Impact factor: 1.390

5.  Clinical and radiographic evaluation of total hip replacement. A standard system of terminology for reporting results.

Authors:  R C Johnston; R H Fitzgerald; W H Harris; R Poss; M E Müller; C B Sledge
Journal:  J Bone Joint Surg Am       Date:  1990-02       Impact factor: 5.284

6.  Roentgenographic assessment of the biologic fixation of porous-surfaced femoral components.

Authors:  C A Engh; P Massin; K E Suthers
Journal:  Clin Orthop Relat Res       Date:  1990-08       Impact factor: 4.176

7.  Traumatic arthritis of the hip after dislocation and acetabular fractures: treatment by mold arthroplasty. An end-result study using a new method of result evaluation.

Authors:  W H Harris
Journal:  J Bone Joint Surg Am       Date:  1969-06       Impact factor: 5.284

8.  The 3-6-year results of a modular noncemented low-bending stiffness hip implant. A preliminary study.

Authors:  H U Cameron
Journal:  J Arthroplasty       Date:  1993-06       Impact factor: 4.757

9.  Primary total hip arthroplasty with use of the modular S-ROM prosthesis. Four to seven-year clinical and radiographic results.

Authors:  M J Christie; D K DeBoer; L W Trick; J C Brothers; R E Jones; G T Vise; T A Gruen
Journal:  J Bone Joint Surg Am       Date:  1999-12       Impact factor: 5.284

10.  Short-term results of the S-ROM-A femoral prosthesis operative strategies for Asian patients with osteoarthritis.

Authors:  Kensuke Kido; Mikihiro Fujioka; Kenji Takahashi; Keiichiro Ueshima; Tsuyoshi Goto; Toshikazu Kubo
Journal:  J Arthroplasty       Date:  2009-04-14       Impact factor: 4.757

View more
  10 in total

1.  Spontaneous fracture of diaphyseal stem of S-ROM femoral prosthesis.

Authors:  Simon Pearce; Amir-Reza Jenabzadeh; William L Walter; Ronald Mark Gillies
Journal:  BMJ Case Rep       Date:  2014-05-20

2.  [Total hip replacement in developmental dysplasia: anatomical features and technical pitfalls].

Authors:  B M Holzapfel; D Bürklein; F Greimel; U Nöth; M Hoberg; H Gollwitzer; M Rudert
Journal:  Orthopade       Date:  2011-06       Impact factor: 1.087

3.  Stable fixation of short-stem femoral implants in patients 70 years and older.

Authors:  Ronak M Patel; Matthew C Smith; Chase C Woodward; S David Stulberg
Journal:  Clin Orthop Relat Res       Date:  2012-02       Impact factor: 4.176

Review 4.  [Hip replacement in patients with neuromuscular disorders].

Authors:  L Renner; V Drwal; F Boettner
Journal:  Orthopade       Date:  2015-07       Impact factor: 1.087

Review 5.  How have alternative bearings and modularity affected revision rates in total hip arthroplasty?

Authors:  William M Mihalko; Markus A Wimmer; Carol A Pacione; Michel P Laurent; Robert F Murphy; Carson Rider
Journal:  Clin Orthop Relat Res       Date:  2014-12       Impact factor: 4.176

6.  Clinical and radiographic outcomes of total hip replacement with a 3-part metaphyseal osseointegrated titanium alloy stem enhanced with low plasticity burnishing: a mean 5-year follow-up study.

Authors:  Spencer Summers; Evan Nigh; Karim Sabeh; Raymond Robinson
Journal:  Arthroplast Today       Date:  2019-08-07

7.  Higher incidence of aseptic loosening caused by a lower canal filling ratio with a modified modular stem in total hip arthroplasty.

Authors:  Kyosuke Kobayashi; Kenichi Kidera; Masaru Itose; Tetsuhiko Motokawa; Ko Chiba; Makoto Osaki
Journal:  J Orthop Surg Res       Date:  2020-11-30       Impact factor: 2.359

8.  Total Hip Arthroplasty Using the S-ROM-A Prosthesis for Anatomically Difficult Asian Patients.

Authors:  Akira Hozumi; Kyousuke Kobayashi; Nobuhisa Tsuru; Chikara Miyamoto; Jyunichiro Maeda; Ko Chiba; Hisataka Goto; Makoto Osaki
Journal:  Biomed Res Int       Date:  2015-10-25       Impact factor: 3.411

Review 9.  Modular Stems: Advantages and Current Role in Primary Total Hip Arthroplasty.

Authors:  Chan-Woo Park; Seung-Jae Lim; Youn-Soo Park
Journal:  Hip Pelvis       Date:  2018-09-04

10.  Modular stem in total hip arthroplasty for patients with trochanter valgus deformity: surgical technique and case series.

Authors:  Xiangpeng Kong; Wei Chai; Minzhi Yang; Alvin Ong; Jiying Chen; Yan Wang; Yonggang Zhou
Journal:  BMC Musculoskelet Disord       Date:  2020-02-24       Impact factor: 2.362

  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.